Abstract:An acousto-optic tunable filter (AOTF) is an acousto-optic modulator. In this paper, the characteristics and overall design method of AOTF hyperspectral imaging system are proposed, which operates in visible or near infrared waveband (0.4-1.0um) and middle wave or long wave (3-5um and 8-12um). Compared with conventional dispersion element, the AOTF hyperspectral imaging system has a larger clear aperture because of the special characteristic of beam separation mode. In particularly, if the non-collinear design mode is used, the AOTF will have a larger diffraction aperture angle and is more suitable for the application in spectral imaging domain. The AOTF hyperspectral imaging spectrometer that operates in visible/near infrared waveband was developed by the non-collinear TeO2 crystal (8mm×8mm). All lights that are through TeO2 crystal in whole field of view (FOV angle is 5 degree) forms an imagines onto the staring focal plane array by Bragg diffraction. The diffraction wavelength of AOTF can be adjusted by the radio frequency signal. The three-dimensional data cube is composed of two-dimension of object space and wavelength in this way, and the graph and spectral are synthesized and implemented. The AOTF hyperspectral imaging spectrometer operating in visible/near infrared waveband is analyzed, and the detailed analysis data is also presented. The AOTF hyperspectral imaging test is studied and developed, and the analysis of data and the next developing advice is given. We also analyze the method about selection of material and technological design in middle wave/long wave infrared waveband of AOTF hyperspectral imaging system.

Temperature characteristics of SWIR spectrometer based on AOTF and data pre-processing model for deep-space exploration application

Influence of temperature on infrared optical system and athermal design

Athermal design of long-wave infrared optical system with hybrid refractive/diffractive

A Spectroscopic Transmittance Analytical Modeling for Field-Widened Michelson Interferometer Employed by High Spectral Resolution Lidars

Design of A Panoramic Long-Wave Infrared Athermal System

Overall Design Technology of Hyperspectral Imaging System Based on AOTF

Optical System Design for a Shortwave Infrared Imaging Spectrometer

SWIR AOTF Imaging Spectrometer Based on Single-pixel Imaging

Optical Parameters Optimization for All-Time Star Sensor

Stray Light Analysis and Suppression for an Infrared Fourier Imaging Spectrometer

Real-time Analysis and Simulation of Remote Sensing Photoelectric Information from Aerospace Fourier Transform Infrared Spectrometer

Application of Athermalisation in Optical Systems

Reflection Grating Spectrometer Based on AOTF

Optimization of Spectral Filtering Parameters of Acousto-Optic Pure Rotational Raman Lidar for Atmospheric Temperature Profiling

Non-uniform temperature field measurement and simulation of a radio telescope's main reflector under solar radiation

Analysis of Flow Field Aero-Optical Effects on the Imaging by Near-Earth Space All-Time Short-Wave Infrared Star Sensors

Effect Analysis of the Digital Spectrometer FFT Algorithm on THz Atmospheric Limb Sounder (TALIS) System Sensitivity

Development for Detecting Upper Atmospheric Wind and Temperature From Satellite

Optical and mechanical design of SWIR hyperspectral field spectroradiometer

Modeling and Simulation of Infrared Dynamic Characteristics of Space-Based Space Targets

Performance analysis on wideband fast Fourier transform spectrometer of THz atmospheric limb Sounder (TALIS)