Transformation of Chlorinated Methanes by Nanoscale Iron Particles

Hl Lien,Wx Zhang

DOI: https://doi.org/10.1061/(asce)0733-9372(1999)125:11(1042)

1999-01-01

Abstract:This paper examines the potential of using laboratory-synthesized nanoscale iron particles to transform chlorinated methanes. The iron particles have diameters on the order of 1-100 nm (0.001-0.1 mu m). Palladized iron particles were prepared by depositing palladium (0.05-1% Pd by weight) on the surface of iron. Batch experiments were conducted to compare reactions of chlorinated methanes with palladized nanoscale iron, nanoscale iron, and commercial grade iron particles (similar to 10 mu m). Rapid transformations of tetrachloromethane (CT) and trichloromethane (CF) were achieved with the palladized nanoscale iron particles. Typically 0.1 mM CT or CF was reduced below detection limits within 1 h. Methane and dichloromethane (DCM) were the major end products. Yields of methane and DCM from CT were 52% and 23%, respectively. Little degradation of DCM was observed within 72 h. With the nanoscale iron and commercial-grade iron particles, much slower reactions of chlorinated methanes were observed. Kinetic analyses indicated that the surface area-normalized rate coefficients k(SA) of the nanoscale iron and commercial grade iron particles were one to two orders of magnitude lower than those of the palladized nanoscale iron.