Abstract:<p>Adding longitudinal fins is an efficient method to enhance the melting behavior of a horizontal heat-storage tube. Nevertheless, the inhomogeneous heat transfer intensity, which is brought by the natural convection of liquid phase change material, causes a hard-melting region in the bottom half of the tube. In this study, two-dimensional models considering natural convection have been established to investigate the melting of phase change material in the latent heat storage unit with longitudinal fins. Optimization of the structural parameters, including fin-thickness and fin-length, are conducted and numerically calculated to accelerate the melting process. To enhance the charging of the hard-melting region, four strategies are employed and compared with the conventional model 1, whose fin length and fin thickness are constant. It is observed that the intensity of heat transfer is higher in the top-half domain, and it is lower in the bottom half. Moreover, thickening the bottom fins and thinning the top fins can efficiently enhance the charging process. An 8.7% reduction in the complete melting time can be realized by model 6 with the thickest bottom fins as compared to model 1 with equal length and equal thickness fins. Meanwhile, model 9, who has the longest bottom fins, can reduce the complete melting time by 47.1% as compared to model 1, so that the method of lengthening the bottom fins and shortening the top fins is likewise useful in accelerating the melting process. Based on the two strategies, we proposed an optimal model 10, who has the thickest and longest bottom fins, is conducted, and the complete melting time can be reduced by 54.1% compared with the original model 1. Consequently, the key limitation of heat storage in the horizontal tube is located in the bottom half, which is defined as hard-melting region, and thickening and lengthening the bottom fins is conducive to enhance the heat storage in the horizontal tube.</p>

Charging Time and Energy Storage Rate Analysis of Fin Effect Inside the Horizontal Tube for Thermal Energy Storage

Effects Evaluation of Fin Layouts on Charging Performance of Shell-and-tube LTES under Fluctuating Heat Sources

Study on heat storage performance of a novel vertical shell and multi-finned tube tank

Study on heat storage performance of a novel bifurcated finned shell-tube heat storage tank

Thermal Energy Storage Characteristics of Finned Tubes with Different Gradients of Fin Heights

Enhancing Heat Transfer and Energy Storage Performance of Shell-and-Tube Latent Heat Thermal Energy Storage Unit with Unequal-Length Fins

Evaluation and Optimization of the Thermal Storage Performance of a Triplex-Tube Thermal Energy Storage System with V-Shaped Fins

Effect of perforated fins on the heat-transfer performance of vertical shell-and-tube latent heat energy storage unit

Melting characteristics of a longitudinally finned-tube horizontal latent heat thermal energy storage system

Discharging performance evaluation and optimization of a latent heat thermal energy storage unit with helm-shaped fin

Influence of fin parameters on the melting behavior in a horizontal shell-and-tube latent heat storage unit with longitudinal fins

Effect of fin number on the melting phase change in a horizontal finned shell-and-tube thermal energy storage unit

Thermal Assessment on Solid-Liquid Energy Storage Tube Packed with Non-Uniform Angled Fins

Evaluation and optimization of melting performance in a horizontal thermal energy storage unit with non-uniform fins

Design of non-uniformly distributed annular fins for a shell-and-tube thermal energy storage unit

Improving the Solidification Performance of a Shell‐and‐tube Latent‐heat Thermal Energy Storage Unit Using a Connected‐y ‐shaped Fin

Study on Dominant Heat Transfer Mechanism in Vertical Smooth/finned-Tube Thermal Energy Storage During Charging Process

Energy storage and exergy efficiency analysis of a shell and tube latent thermal energy storage unit with non-uniform length and distributed fins

An experimental study on the effect of annular and radial fins on thermal performance of a latent heat thermal energy storage unit

Solidification Performance of a Latent Heat Storage Unit with Innovative Longitudinal Triangular Fins

A review and prospective of fin design to improve heat transfer performance of latent thermal energy storage