Abstract:The utilization of Global Navigation Satellite System (GNSS) is becoming an attractive approach for the orbit determination of geostationary orbit (GEO) satellites. As a flight test for the feasibility of GNSS-based orbit determination at high orbit altitude, a GEO satellite named TJS-2 is launched. This satellite is equipped with a high-gain antenna, a pre-amplifier, and a high-sensitivity receiver. This study investigates the methods of high-sensitivity processing for the GNSS side lobe signals and the onboard orbit determination filter to improve navigation performance. In accordance with flight data, the GNSS signal characteristics, including availability, position dilution of precision (PDOP), carrier-to-noise ratio density (C/N0), and quality of observations, are analyzed. The mean number of GPS, GLONASS, and BDS satellites tracked is 7.6, 4.6, and 0.3, respectively. The mean PDOP of GPS, GPS + GLONASS, and GPS + BDS satellites tracked is 10.8, 8.4, and 8.9, respectively. The distribution of C/N0 and the number of observations with respect to the nadir angles are illustrated. For GPS, GLONASS, and BDS, the corresponding standard deviation of the pseudorange noise is 7.7, 16.1, and 5.2 m, and that of the carrier-phase noise is 37.6, 41.8, and 53.7 mm, respectively, in terms of C/N0 < 30. We give the navigation performance through comparisons with two reference orbits. The root mean square (RMS) of position accuracy of the onboard solutions in radial, along-track, and cross-track directions is 20.90, 3.34, and 2.68 m, respectively. The RMS of position accuracy in radial direction is reduced to 4.13 m after the optimization of the orbit determination filter parameters. For the single-epoch least squares solution, the velocity accuracy can improve from 0.25 to 0.16 m/s when GPS and GLONASS observations are combined. We discuss the performance of single-epoch least squares solutions combined with BDS observations. A remarkable improvement in the vertical dilution of precision is obtained when BDS inclined geostationary orbit observation is involved. The RMS of position and velocity accuracy is reduced from 39.30 to 16.90 m and from 0.26 to 0.09 m/s, respectively.

TianQin Constellation Formation Fly Initial Orbital Maintenance with GNSS Space Service Volume Navigation

Ground Experimental Verification of High-Stability Temperature Control System and Flight Data Analysis

Analysis and comparison of the orbit determination accuracy of TianQin based on multiple ground-based measurements

Tsinghua Scientific Satellite Precise Orbit Determination Using Onboard GNSS Observations with Antenna Center Modeling.

TianQin: a space-borne gravitational wave detector

Orbital effects on time delay interferometry for TianQin

The TianQin project: Current progress on science and technology

The facilities and performance of TianQin laser ranging station

GNSS Receiver for Q-Sat and Its Analysis of Precise Orbit Determination

Performance Analysis of GNSS Receiver allied in High-Orbit Based on SoC Platform

GLONASS signal characteristics analysis and navigation performance for geostationary satellites

Fundamentals of the orbit and response for TianQin

Analyses of Laser Propagation Noises for TianQin Gravitational Wave Observatory Based on the Global Magnetosphere MHD Simulations

On payload architecture and pointing control strategies for TianQin

Impact of orbital orientations and radii on TianQin constellation stability

The first round result from the TianQin-1 satellite

The Data Processing and Analysis for the CE-5T1 GNSS Experiment

Data Transmission Analysis and Communication Scheme Design for TianQin Mission

Continuous charge management scheme for TianQin

GNSS-based orbit determination method and flight performance for geostationary satellites

A Fine-Tuned Positioning Algorithm for Space-Borne GNSS Timing Receivers