Abstract:TianQin is a proposed space-based gravitational wave observatory. It is designed to detect the gravitational wave signals in the frequency range of 0.1 mHz–1 Hz. At a geocentric distance of 105 km, the plasma in the Earth magnetosphere will contribute as the main source of environmental noises. Here, we analyze the acceleration noises that are caused by the magnetic field of space plasma for the test mass of TianQin. The real solar wind data observed by the Advanced Composition Explorer are taken as the input of the magnetohydrodynamic simulation. The Space Weather Modeling Framework is used to simulate the global magnetosphere of the Earth, from which we obtain the plasma and magnetic field parameters on the detector's orbits at s = 0°, 30°, 60° and 90°, where s is the acute angle between the line that joins the Sun and the Earth and the projection of the normal of the detector's plane on the ecliptic plane. We calculate the time series of the residual accelerations and the corresponding amplitude spectral densities on these orbit configurations. We find that the residual acceleration produced by the interaction between the TM's magnetic moment induced by the space magnetic field and the spacecraft magnetic field ( a M1) is the dominant term, which can approach 10−15 m s–2 Hz–1/2 at f ≈ 0.2 mHz for the nominal values of the magnetic susceptibility (χ m = 10−5) and the magnetic shielding factor (ξ m = 10) of the test mass. The ratios between the amplitude spectral density of the acceleration noise caused by the space magnetic field and the preliminary goal of the inertial sensor are 0.38 and 0.08 at 1 mHz and 10 mHz, respectively. We discuss the further reduction of this acceleration noise by decreasing χ m and/or increasing ξ m in the future instrumentation development for TianQin.

Ground Experimental Verification of High-Stability Temperature Control System and Flight Data Analysis

Real-Time Calibration Method For Ground-Based Tt&C Systems Using Satellite-To-Ground Differential Gps

Design of Temperature Control System of Pico-Satellite MEMS Gyroscope

Long-term thermal stability of TianQin satellites

Analysis and comparison of the orbit determination accuracy of TianQin based on multiple ground-based measurements

The TianQin project: Current progress on science and technology

The first round result from the TianQin-1 satellite

TianQin: a space-borne gravitational wave detector

Design and tests of the high-precision temperature control and measurement system in the digital gravimeter

Data Transmission Analysis and Communication Scheme Design for TianQin Mission

Analyses of residual accelerations for TianQin based on the global MHD simulation

Quasi-All-Passive Thermal Control System Design and On-Orbit Validation of Luojia 1-01 Satellite

Insight-HXMT on-orbit thermal control status and thermal deformation impact analysis

The Influence of Temperature Disturbance on Space Inertial Sensors

The facilities and performance of TianQin laser ranging station

Q-SAT for Atmosphere and Gravity Field Detection: Design, Mission and Preliminary Results

Thermal Design and Verification of Spherical Scientific Satellite Q-SAT

Temperature control method and verification for spaceborne atomic clock based on phase change technology

Gravitational Wave Astronomy With TianQin

Calibration and validation of a space electrostatic accelerometer onboard Tianzhou-1 cargo spacecraft using GNSS and attitude data

Analyses of Laser Propagation Noises for TianQin Gravitational Wave Observatory Based on the Global Magnetosphere MHD Simulations