Abstract:The binary perovskite-type compound (1 − x )BiFeO 3 – x BaTiO 3 (BF-BT) is considered as a promising high-temperature lead-free piezoelectric material due to its high Curie temperature ( T C > 400 °C) and better electromechanical properties. In this work, ternary lead-free piezoelectric ceramics with a chemical formula of (0.67 − x )BiFeO3–0.33BaTiO3– x Bi(Zn0.5Ti0.5)O 3 + 1 mol% MnO 2 (where x = 0–0.05) were prepared by the conventional solid-state reaction route. The effects of Bi(Zn 0.5 Ti 0.5 )O 3 introduction on the phase structures and microstructures, piezoelectric and dielectric properties, as well as impedance characteristics of BF-BT ceramics were investigated in detail. Firstly, all the samples synthesized exhibit a pure perovskite structure with the coexistence of rhombohedral ( R ) and tetragonal ( T ) phases, and the T phase content increases with increase in x . A small amount of Bi(Zn 0.5 Ti 0.5 )O 3 ( x ≤ 0.03) that were incorporated into the perovskite lattice of BF-BT can promote the grain growth of ceramics. Secondly, all samples were found with a notable relaxed phase transition behavior, T C of the system decreases with increase in x . The AC impedance spectra of the samples were fitted and analyzed according to the R-CPE equivalent circuit model, the electric impedance of the ceramics at high temperatures was mainly contributed by grain boundaries. Moreover, the dielectric relaxation activation energy of the samples firstly decreases and then increases with increase in x . Finally, the composition with x = 0.02 shows the optimized electrical properties among these samples, including T C = 454 °C, d 33 = 117 pC/N, k p = 23%, tan δ = 0.11, which are mainly benefited from the bismuth content compensation and the substitution of (Zn 0.5 Ti 0.5 ) 3+ for Fe 3+ at B-site reducing the valence change of Fe 3+ in BF-BT.

BiFeO3-BaTiO3: A New Generation of Lead-Free Electroceramics

Design and development of a new lead-free BiFeO3-BaTiO3 quenched ceramics for high piezoelectric strain performance

Investigation of Lead-Free BiFeO3–BaTiO3 Piezoelectric Ceramics Through Precise Composition Control

Investigation of BiFeO3-BaTiO3 Lead-Free Piezoelectric Ceramics with Nonstoichiometric Bismuth

Improved piezoelectric properties in Bi(Mg2/3Nb1/3)O3‐modified BiFeO3–BaTiO3 lead‐free piezoelectric ceramics

Insight into the evolutions of microstructure and performance in bismuth ferrite modified potassium sodium niobate lead-free ceramics

Electrical properties of (1-x)BiFe0.94Zn0.03Ti0.03O3-xBaTiO3 lead-free ceramics obtained via sol-gel route and two-step sintering process

Low electric field induced high energy storage capability of the free-lead relaxor ferroelectric 0.94Bi0.5Na0.5TiO3-0.06BaTiO3-based ceramics

Achieving ultrahigh energy storage performance in BiFeO3-BaTiO3 based lead free relaxors via a composition optimization strategy

Improved chemical defects, domain structure and electrical properties of BiFeO 3 –BaTiO 3 lead-free ceramics by simultaneous Na/Bi codoping and quenching process

Electrical properties of 0.94Bi0.5Na0.5TiO3–0.06Ba(Zr0.055Ti0.945)O3 lead-free ceramics with high thermal stability

Low electric field induced large electromechanical properties of BiFeO3-BaTiO3-based ceramics via phase composition modulation

Achieving high electromechanical response in lead-free BNT-BT ceramics through synergistic A/B-site doping

Enhanced electrical properties of (Zn, Mn)-modified BiFeO3–BaTiO3 lead-free ceramics prepared via sol–gel method and two-step sintering

Simultaneously Achieved Temperature-Insensitive High Energy Density and Efficiency in Domain Engineered BaTiO3-Bi(Mg0.5Zr0.5)O3 Lead-Free Relaxor Ferroelectrics

Improved energy storage performance of lead-free BaTi0.96Li0.04O2.94 ceramics via domain structure engineering

Determination of the superstructure of lead free piezoelectric ceramics (BNT-BT-KNN)

Effects of Bi(Zn0.5Ti0.5)O3 introduction on the structures and electrical properties of BiFeO3–BaTiO3 lead-free piezoelectric ceramics

Enhancement of Nonlinear Dielectric Properties in BiFeO3–BaTiO3 Ceramics by Nb-Doping

Enhanced Piezoelectricity and Thermal Stability of Electrostrain Performance in BiFeO3-Based Lead-Free Ceramics

Tetragonal (ba, Ca) (zr, Ti)O3 Textured Ceramics with Enhanced Piezoelectric Response and Superior Temperature Stability