Abstract:Surface erosion caused by solid particle impact frequently occurs in engineering applications involving particulate flow. With the tremendous progress in computational technology, discrete element method (DEM)-based numerical methods have become a powerful means of studying surface erosion. However, the applicability of applied erosion models remains one of the critical challenges in DEM modelling to obtain satisfactory accuracy over a wide range of materials and impact conditions. In this study, an impact energy erosion model (IEEM) that evaluates erosive wear using accumulated impact energy during the impact process is developed. In IEEM, both cutting and deformation wear are considered. A calibration method of the specific energy that combines DEM simulations and abrasive jet tests is established. To quantitatively predict the erosive wear of the target surface eroded by different particles, an energy allocation rule based on the hardness ratio of the target surface to particles is proposed. Its rationality is thoroughly evaluated before embarking on DEM simulations. Subsequently, the accuracy of DEM simulations incorporated with IEEM and the energy allocation rule is comprehensively verified by comparing them with experimental data on ductile, brittle and semi-brittle materials. The results confirm that DEM simulations can reasonably predict the dependence of erosive wear on impact velocities, impact angles and erodent particle hardness, regardless of the material involved. The calibrated specific energy reflects the properties of the material and further determines the wear mechanism. Finally, the influence of critical DEM parameters on erosion prediction is studied. Generally, DEM incorporated with IEEM and the energy allocation rule provides a quantitative erosion prediction framework applicable to different materials and impact conditions. In the future, this framework has the potential to be applied to the erosion prediction of more systems.

Discrete Element Method Numerical Investigation on the Particle Damper

Discrete Element Modeling of Sand Behavior in a Biaxial Shear Test

DEM simulation of particle damping

Granular Damping Analysis Using a Direct Simulation Monte Carlo Approach

Numerical Simulation and Test for a Turbine Damper

Studies of the performance of particle dampers attached to a two-degrees-of-freedom system under random excitation

Experimental and optimization analysis of a multiple unidirectional single-particle damper

Design of a particle damper and experimental study on vibration damping of the pipeline

Two-way coupled MBD–DEM modeling and experimental validation for the dynamic response of mechanisms containing damping particles

Discrete element method and its applications in fluidization

Semi-analytical analysis on free vibration of cantilever beam with particle damping based on multiscale method

Investigation of Modeling Non-Spherical Particles by Using Spherical Discrete Element Model with Rolling Friction

Studies on dissipative characteristics and equivalent model of particle damper in railway application

An Impact Energy Erosion Model with an Energy Allocation Rule for the Discrete Element Method

Comparative Studies on Structures with a Tuned Mass Damper and a Particle Damper

Research on longitudinal vibration suppression of underwater vehicle shafting based on particle damping

DEM Investigation of Energy Dissipation at Particle Contacts in Granular Soil Under Cyclic Torsional Shear

Effects of obstacle grids on the damping characteristics of particle dampers under impact load

Numerical simulation and dynamic experimental investigation on vibration control of a structural system with a stacked single particle‐inerter damper

A Review of the Discrete Element Method Application on Concrete Materials

Equivalent model and parameter analysis of non-packed particle damper