Abstract:Zinc salt is widely used in biomass selective catalytic pyrolysis. Monitoring the formation process of target products in biomass pyrolysis through current experimental methods is difficult, and the evolution of pyrolysis products is rarely reported. Online pyrolysis photoionization time-of-flight mass spectrometry (Py-PI-TOFMS) can be conducted for the real-time monitoring of biomas pyrolysis process. In this study, the catalytic effects of zinc acetate on biomass pyrolysis products and process were investigated through pyrolysis experiments on rice hulls impregnated with zinc acetate of different concentrations. Pyrolysis-gas chromatography-mass spectrometry (Py-GC/MS) and Py-PI-TOFMS were performed. Before the loading of zinc acetate, the rice husk was washed with acetate acid for the removal of alkali and alkaline metals.Pyrolysis temperature was set at 400, 450, 500, 550, or 600 degrees C in the Py-GC/MS experiments, and the chemical compositions of the pyrolysis gases were analyzed. The results showed that the contents of acids, furans, and anhydrosugars increased, whereas those of phenols, aldehydes, and ketones decreased. Zinc acetate promoted the dehydration and cyclization reaction in cellulose and hemicellulose pyrolysis but suppressed the pyrolysis of lignin. At increased zinc acetate loading, the acid content continuously increased, furan, anhydrosugar, and ketone contents increased first and then stabilized, and the contents of aldehydes and phenolic products decreased first and then stabilized. Acetate acid, furfural, 1-hydroxy-3,6-dioxabicyclo[3.2.1]octan-2-one, and 4-vinylphenol yield increased under the catalytic effects of zinc acetate. The Lewis acidity of zinc acetate greatly increased the yield of furfural and1-hydroxy-3,6-dioxabicyclo [3.2.1]octan-2-one and decreased the yield of 4-vinylphenol significantly.The instantaneous mass spectrum of pyrolysis gas was obtained through Py-PI-TOFMS at a certain frequency during pyrolysis. The pyrolysis temperature was set at 400 degrees C. Different kinds of products reached the maximum production rate at different times. Under the catalysis of zinc acetate, the time for the maximum production rate of furan and cyclopentanone products was advanced, and the advancement increased with zinc acetate loading. The time-evolved profiles of m/z 96 and 126 showed that furfural was mainly generated at the early stage of biomass pyrolysis, and 5-hydroxymethylfurfural was mainly generated at the late stage. This showed that the main generation pathway of furfural is not the secondary cleavage of 5-hydroxymethylfurfural and the formation pathway of furfural and 5-hydroxymethylfurfural is competitive. Moreover, zinc acetate has no significant effect on the time at which the furfural reaches the maximum formation rate, but it can advance the time for the maximum production rate of 5-hydroxymethylfurfural.

Catalytic Effects of Ammonium Dihydrogen Phosphate on the Pyrolysis of Lignocellulosic Biomass: Selective Production of Furfural and Levoglucosenone

Catalytic Decomposition of Furfural Residue with Dilute Sulfuric Acid to Produce Levulinic Acid in High Temperature Liquid Water

Influence of Cellulose Ultrastructure on the Catalytic Pyrolysis for Selective Production of Levoglucosenone

Influences of the Reaction Temperature and Catalysts on the Pyrolysis Product Distribution of Lignocellulosic Biomass (Aspen Wood and Rice Husk)

Effect of Alkali and Alkaline Earth Metals on In-Situ Catalytic Fast Pyrolysis of Lignocellulosic Biomass: A Microreactor Study

Catalytic Fast Pyrolysis of Cellulose for the Selective Production of Levoglucosenone Using Phosphorus Molybdenum Tin Mixed Metal Oxides

Effect of Torrefaction Temperature on Lignin Macromolecule and Product Distribution from HZSM-5 Catalytic Pyrolysis

Catalytic Pyrolysis of Cellulose with Sulfated Metal Oxides: A Promising Method for Obtaining High Yield of Light Furan Compounds

Selective Fast Pyrolysis of Biomass Impregnated with ZnCl2 to Produce Furfural: Analytical Py-GC/MS Study

Catalytic Fast Pyrolysis of Cellulose Mixed with Sulfated Titania to Produce Levoglucosenone: Analytical Py-GC/MS Study

Catalytic Effect Of Zinc Acetate On Products Distribution And Reaction Process Of Biomass Pyrolysis

Coproduction of 1,4:3,6-Dianhydro-α-d-glucopyranose, Furfural, and Formic Acid Through Oxalic Acid-Assisted Staged Fast Pyrolysis of Cellulose

Selective conversion of lignocellulosic biomass and its components into value-added furans over Al-based bimetals: Analytical Py-GC × GC/MS

Catalytic Effects of Four Metal Chlorides on Fast Pyrolysis of Cellulose(ⅱ)mechanism Analysis

Investigation on the Catalytic Behavior of Alkali Metals and Alkaline Earth Metals on the Biomass Pyrolysis Assisted with Real-Time Monitoring

Cellulose Pyrolysis under Nh3 Atmosphere for Levoglucosan and Pyrrole: an Experimental and Theoretical Study

The oxalic acid-assisted fast pyrolysis of biomass for the sustainable production of furfural

Influence of pyrolysis temperature and time on the cellulose fast pyrolysis products: Analytical Py-GC/MS study

Cellulose pyrolysis under NH 3 atmosphere for levoglucosan and pyrrole: An experimental and theoretical study

Efficient ex-situ catalytic upgrading of biomass pyrolysis vapors to produce methylfurans and phenol over bio-based activated carbon

High production of furfural by flash pyrolysis of C6 sugars and lignocellulose by Pd-PdO/ZnSO4 catalyst