Abstract:Improper electronic waste management in the world especially in developing countries such as Iran has resulted in environmental pollution. Copper, nickel, and manganese are from the most concerned soil contaminating heavy metals which found in many electronic devices that are not properly processed. The aim of this study was to investigate the biological removal of copper, nickel, and manganese by Bacillus species isolated from a landfill of electronic waste (Zainal Pass hills located in Isfahan, Iran) which is the and to produce nanoparticles from the studied metals by the isolated bacteria. The amounts of copper, nickel, and manganese in the soil was measured as 1.9 × 10 4 mg/kg, 0.011 × 10 4 mg/kg and 0.013 × 10 4 mg/kg, respectively based on ICP-OES analysis, which was significantly higher than normal (0.02 mg/kg, 0.05 mg/kg, and 2 mg/kg, respectively. The minimum inhibitory concentration (MIC) and the minimum bactericidal concentration (MBC) of metals on the bacterial isolates was determined. The biosorption of metals by the bacteria was evaluated by inductively coupled plasma optical emission spectroscopy (ICP-OES). The metal nanoparticles were synthetized utilizing the isolates in culture media containing the heavy metals with the concentrations to which the isolates had shown resistance. X ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS) were used for the evaluation of the fabrication of the produced metal nanoparticles. Based on the findings of this study, a total of 15 bacterial isolates were obtained from the soil samples. The obtained MICs of copper, nickel, and manganese on the isolates were 40–300 mM, 4–10 mM, and 60–120 mM, respectively. The most resistant isolates to copper were FM1 and FM2 which were able to bio-remove 79.81% and 68.69% of the metal, respectively. FM4 and FM5 were respectively the most resistant isolate to nickel and manganese and were able to bio-remove 86.74% and 91.96% of the metals, respectively. FM1, FM2, FM4, and FM5 was molecularly identified as Bacillus cereus , Bacillus thuringiensis , Bacillus paramycoides , and Bacillus wiedmannii , respectively. The results of XRD, SEM and EDS showed conversion of the copper and manganese into spherical and oval nanoparticles with the approximate sizes of 20–40 nm. Due to the fact that the novel strains in this study showed high resistance to copper, nickel, and manganese and high adsorption of the metals, they can be used in the future, as suitable strains for the bio-removal of these metals from electronic and other industrial wastes.

ECOTOXIC HEAVY METAL TRANSFORMATION BY BACTERIA IN WASTE WATER

[Uptake of Nickel from Industrial Wastewater by Genetically Engineered Escherichia Coli JM109].

Microbial Characterization of Heavy Metal Resistant Bacterial Strains Isolated from an Electroplating Wastewater Treatment Plant.

Efficient Bioleaching of Heavy Metals from Contaminated Sediment in Batch Method Coupled with the Assistance of Heterotrophic Microorganisms

Efficiency, mechanism and microbial community of Cd(II) removal by mixed bacteria enriched from heavy metals mine soil

Heavy metal removal by biomineralization of urease producing bacteria isolated from soil

Widespread bacterial responses and their mechanism of bacterial metallogenic detoxification under high concentrations of heavy metals

Characteristics and in situ remediation effects of heavy metal immobilizing bacteria on cadmium and nickel co-contaminated soil

Isolation and identification of bacteria from solid waste deposit sites for the degradation of heavy metals

The Large-Scale Process of Microbial Carbonate Precipitation for Nickel Remediation from an Industrial Soil.

Biosorption of copper, nickel, and manganese as well as the production of metal nanoparticles by Bacillus species isolated from soils contaminated with electronic wastes

Metal Removal from Nickel-Containing Effluents Using Mineral–Organic Hybrid Adsorbent

Heavy metals biosorption in unary, binary, and ternary systems onto bacteria in a moving bed biofilm reactor

Detoxification of copper and zinc from anaerobic digestate effluent by indigenous bacteria: Mechanisms, pathways and metagenomic analysis

Utilisation of acid-tolerant bacteria for base metal recovery under strongly acidic conditions

The leaching of heavy metals from spent MH/Ni batteries by Thiobacilli

Bioremoval of Different Heavy Metals in Industrial Effluent by the Resistant Fungal Strain Aspergillus niger

Multimetal bioremediation from aqueous solution using dead biomass of Mucor sp. NRCC6 derived from detergent manufacturing effluent

Tolerance and Biosorption of Heavy Metals by Cupriavidus metallidurans strain XXKD-1 Isolated from a Subsurface Laneway in the Qixiashan Pb-Zn Sulfide Minery in Eastern China

The removal of heavy metal pollution from wastewaters using thermophilic B. cereus SO-16 bacteria

Heavy Metal Bioremediation Potential of Autochthonous Lactic Acid Bacteria for Use in Edible Leafy Vegetables