Abstract:Improper electronic waste management in the world especially in developing countries such as Iran has resulted in environmental pollution. Copper, nickel, and manganese are from the most concerned soil contaminating heavy metals which found in many electronic devices that are not properly processed. The aim of this study was to investigate the biological removal of copper, nickel, and manganese by Bacillus species isolated from a landfill of electronic waste (Zainal Pass hills located in Isfahan, Iran) which is the and to produce nanoparticles from the studied metals by the isolated bacteria. The amounts of copper, nickel, and manganese in the soil was measured as 1.9 × 10 4 mg/kg, 0.011 × 10 4 mg/kg and 0.013 × 10 4 mg/kg, respectively based on ICP-OES analysis, which was significantly higher than normal (0.02 mg/kg, 0.05 mg/kg, and 2 mg/kg, respectively. The minimum inhibitory concentration (MIC) and the minimum bactericidal concentration (MBC) of metals on the bacterial isolates was determined. The biosorption of metals by the bacteria was evaluated by inductively coupled plasma optical emission spectroscopy (ICP-OES). The metal nanoparticles were synthetized utilizing the isolates in culture media containing the heavy metals with the concentrations to which the isolates had shown resistance. X ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDS) were used for the evaluation of the fabrication of the produced metal nanoparticles. Based on the findings of this study, a total of 15 bacterial isolates were obtained from the soil samples. The obtained MICs of copper, nickel, and manganese on the isolates were 40–300 mM, 4–10 mM, and 60–120 mM, respectively. The most resistant isolates to copper were FM1 and FM2 which were able to bio-remove 79.81% and 68.69% of the metal, respectively. FM4 and FM5 were respectively the most resistant isolate to nickel and manganese and were able to bio-remove 86.74% and 91.96% of the metals, respectively. FM1, FM2, FM4, and FM5 was molecularly identified as Bacillus cereus , Bacillus thuringiensis , Bacillus paramycoides , and Bacillus wiedmannii , respectively. The results of XRD, SEM and EDS showed conversion of the copper and manganese into spherical and oval nanoparticles with the approximate sizes of 20–40 nm. Due to the fact that the novel strains in this study showed high resistance to copper, nickel, and manganese and high adsorption of the metals, they can be used in the future, as suitable strains for the bio-removal of these metals from electronic and other industrial wastes.

The removal of heavy metal pollution from wastewaters using thermophilic B. cereus SO-16 bacteria

Metal tolerance and biosorption of Pb ions by Bacillus cereus RMN 1 (MK521259) isolated from metal contaminated sites

Biosorption of copper, nickel, and manganese as well as the production of metal nanoparticles by Bacillus species isolated from soils contaminated with electronic wastes

Exploring bioleaching potential of indigenous Bacillus sporothermodurans ISO1 for metals recovery from PCBs through sequential leaching process

An assessment of metal absorption competence of indigenous metal tolerant bacterial species- an in-vitro study

Heavy Metal Bioaccumulation and Cation Release by Growing Bacillus Cereus RC-1 under Culture Conditions.

Removal of Heavy Metals in Sewage Sludge and Losses of Nutrition During Bioleaching

Isolation and identification of bacteria from solid waste deposit sites for the degradation of heavy metals

Multimetal bioremediation from aqueous solution using dead biomass of Mucor sp. NRCC6 derived from detergent manufacturing effluent

Efficiency, mechanism and microbial community of Cd(II) removal by mixed bacteria enriched from heavy metals mine soil

Integrative chemical and omics analyses reveal copper biosorption and tolerance mechanisms of Bacillus cereus strain T6

Isolation and characterization of Bacillus cereus IST105 from electroplating effluent for detoxification of hexavalent chromium

Detoxification of copper and zinc from anaerobic digestate effluent by indigenous bacteria: Mechanisms, pathways and metagenomic analysis

Microbial bioremediation: unraveling the potential for cleaner environments through comparative analysis

A Study of the Suitability of Microbial Cells for the Biosorption and Bioaccumulation of Heavy Metal Removal

From industrial sites to environmental applications with Cupriavidus metallidurans

Toxic heavy metal ions contamination in the aqueous environment, its toxicity and methods of microbial remediation

Microbial Strategies for Heavy Metal Removal from Industrial Wastewater

Potential applications of extremophilic bacteria in the bioremediation of extreme environments contaminated with heavy metals

The Removal of Selenite and Cadmium by Immobilized Biospheres: Efficiency, Mechanisms and Bacterial Community.

Role of chromium reductases, antioxidants, and biosorption against oxidative damage of metals by Bacillus cereus