Abstract:The present study examines the physical models for predicting long-term creep strengths at different application temperatures using creep parameters determined from short term creep tests for the modified 9Cr-1Mo steel, which is a candidate material for design and construction of Gen-IV nuclear power plants with a specified service life of minimum 60 years. It is demonstrated that the complex stress and temperature dependence of minimum creep rate of this steel grade can be rationalised in a simple manner on the basis of the new power law creep equation that incorporates the tensile strength sigma TS. The activation energy of creep determined on this basis does not depend on stress and the stress exponent depends only on the stress ratio sigma/sigma(TS) region but not on temperature. This allows the new power law equation to be used in combination with Monkman- Grant relationship to predict long-term (60 years) creep strengths and lifetimes at different application temperatures using creep parameters determined from creep tests lasting less than 6000 h. The reliability of these predictions is discussed and the causes for possible over-predictions are considered. It is also shown that the previously observed stress dependence of activation energy of creep is simply the consequence of the conventional method by which this parameter is determined and hence has no physical significance. The change in stress exponent in respective stress ratio sigma/sigma(TS) regions is not due to the change in creep mechanism but may be attributed to microstructure changes under creep load in respective sigma/sigma(TS) ranges. (C) 2017 Elsevier B.V. All rights reserved.

Average creep rate model for prediction of stress relaxation

Creep based prediction model of stress relaxation behavior for high temperature materials

Prediction methodology of stress relaxation performance based on continuum damage mechanics

Creep Performance Prediction Method Through Short-term Stress Relaxation Tests

Creep Based Stress Relaxation Damage Model for High Temperature Components

Microstructural Damage Mechanics-Based Model for Creep Fracture of 9%cr Steel under Prior Fatigue Loading

Assessment of prior fatigue damage and a new approach to predict remanent creep rupture of P92 steel

An Engineering Prediction Model for Stress Relaxation of Polymer Composites at Multiple Temperatures

Assessment of Creep Behavior Using a Damage-Coupled Model for Martensitic Stainless Steel

A Robust Life Prediction Model for a Range of Materials under Creep-Fatigue Interaction Loading Conditions

Research on Fatigue-Creep Interaction Damage of Steel 1.25Cr0.5mo

On the physical models for predicting the long-term creep strengths and lifetimes of modified 9Cr-1Mo steel

A Modified Strain Energy Density Exhaustion Model for Creep–fatigue Life Prediction

On the Prediction of Long Term Creep Strength of Creep Resistant Steels

A New Empirical Life Prediction Model For 9-12%Cr Steels Under Low Cycle Fatigue And Creep Fatigue Interaction Loadings

A New Method of Creep Ruptures Data Extrapolation Based on the Work

A Statistical Mo Del to Predict the Steady-State Creep Rate

The influence of stress-regime dependent creep model and ductility in the prediction of creep crack growth rate in Cr–Mo–V steel

An improved life prediction strategy at elevated temperature based on pure creep and fatigue data: Classical strain controlled and hybrid stress-strain controlled creep-fatigue test

Effects of Stress Level and Stress State on Creep Ductility: Evaluation of Different Models

Prediction of creep crack initiation in Cr–Mo–V steel specimens with different geometries