Abstract:In this contribution, we demonstrate a wide-field hyperspectral mid-infrared (MIR) microscope based on multidimensional single-pixel imaging (SPI). The microscope employs a high brightness MIR supercontinuum source for broadband (1.55 [Formula: see text]-4.5 [Formula: see text]) sample illumination. Hyperspectral imaging capability is achieved by a single micro-opto-electro-mechanical digital micromirror device (DMD), which provides both spatial and spectral differentiation. For that purpose the operational spectral bandwidth of the DMD was significantly extended into the MIR spectral region. In the presented design, the DMD fulfills two essential tasks. On the one hand, as standard for the SPI approach, the DMD sequentially masks captured scenes enabling diffraction-limited imaging in the tens of millisecond time-regime. On the other hand, the diffraction at the micromirrors leads to dispersion of the projected field and thus allows for wavelength selection without the application of additional dispersive optical elements, such as gratings or prisms. In the experimental part, first of all, the imaging and spectral capabilities of the hyperspectral microscope are characterized. The spatial and spectral resolution is assessed by means of test targets and linear variable filters, respectively. At a wavelength of 4.15 [Formula: see text] a spatial resolution of 4.92 [Formula: see text] is achieved with a native spectral resolution better than 118.1 nm. Further, a post-processing method for drastic enhancement of the spectral resolution is proposed and discussed. The performance of the MIR hyperspectral microsopce is demonstrated for label-free chemical imaging and examination of polymer compounds and red blood cells. The acquisition and reconstruction of Hadamard sampled 64 [Formula: see text] 64 images is achieved in 450 ms and 162 ms, respectively. Thus, combined with an unprecedented intrinsic flexibiliy gained by a tunable field of view and adjustable spatial resolution, the demonstrated design drastically improves the sample throughput in MIR chemical and biomedical imaging.

Design of a Visible-Near-infrared Hyperspectral Microscopy Optical Systems

Fabry-Perot Multilayer for Spectral Imaging Applications

Parallel Scan Hyperspectral Fluorescence Imaging System and Biomedical Application for Microarrays

Quasi-confocal, multichannel parallel scan hyperspectral fluorescence imaging method optimized for analysis of multicolor microarrays.

Optical Design and Laboratory Test of an Internal Pushbroom Hyperspectral Microscopy

Molecular Hyperspectral Imaging (MHSI) System and Application in Biochemical Medicine

Optical System Design for a Shortwave Infrared Imaging Spectrometer

Discussions of Hyperspectral Imaging for Medical Diagnostics

New-Styled System Based on Hyperspectral Imaging

Multi-Mode Microscopic Hyperspectral Imager For The Sensing Of Biological Samples

A Novel Hyperspectral Endoscopic Imaging Method Based on Broad- and Overlapped-Band Filters

Deep ultraviolet high-resolution microscopic hyperspectral imager and its biological tissue detection

Wide-field mid-infrared hyperspectral imaging beyond video rate

Excitation-scan Mirror Array System Advancements to Hyperspectral Imaging Applications

Minimal integrated hyperspectral imaging system

Design and realization of an long-wave infrared hyperspectral imaging system

Diffraction-limited hyperspectral mid-infrared single-pixel microscopy

A Stare-Down Video-Rate High-Throughput Hyperspectral Imaging System and Its Applications in Biological Sample Sensing

Design of Hyperspectral Imaging System Based on LCTF

Design of a Control System for a Visible/near-Infrared Real-Time Imaging Spectrometer

Hyperspectral imaging via a multiplexing digital micromirror device