Abstract:As one of the most widely used optical films, antireflective coating (ARC) is widely used in lasers, display screens and solar cells. In this article, the double-layer ARC coating consists of a bottom layer using SiO2-TiO2 composite nanomaterials and a top layer of SiO2 modified with Hexamethyldisilazane (HMDS). The optimal parameters of the double-layer ARC were obtained through the simulation software Macleod. Meanwhile, the aging time of SiO2 sol, the volume fraction of HMDS, the annealing temperature, the dip-coating speed, and the volume fraction of TiO2, which affect the refractive index of the bottom and top layers, were explored in order to match the best parameters. By adjusting the structure of the bottom and top layers, the double-layer broadband ARC coating has a maximum transmittance of 97.6% in the 400-1800 nm spectral range, and an average transmittance of 96.0%. In addition, HMDS was used to modify the SiO2 sol to obtain a double-layer ARC with superhydrophobic properties with a hydrophobic angle of 151.4°. After the high-temperature and high-humidity environment test, the antireflective performance of the double-layer ARC has not changed significantly, demonstrating the broad prospects for application in large outdoor solar photovoltaic power plants. Moreover, this work not only provides a new method for adjusting the refractive index of the coating, but also opens up a new way for the preparation of broadband ARC.

Sol-gel Preparation of Anti-Fogging SiO2/SiO2-TiO2 Double-layer Antireflective Coating

Design and preparation of SiO 2/TiO 2/SiO 2-TiO 2 antireflective coatings with excellent abrasion-resistance and transmittance via sol-gel process

Sol–gel preparation of SiO2/TiO2/SiO2–TiO2 broadband antireflective coating for solar cell cover glass

Sol-gel Preparation of Self-Cleaning SiO2-TiO2/SiO2-TiO2 Double-Layer Antireflective Coating for Solar Glass

Design and Preparation of SiO2/TiO2/SiO2-TiO2 Antireflective Coatings with Excellent Abrasion-resistance and Transmittance Via Sol-Gel Process

Design and Preparation of Sio2/Sio2-Tio2 Antireflective Coating with Excellent Environmental Resistance

Design and Preparation of Multi-Functional Single-Layer Silica Antireflective Coatings

Low-Temperature Preparation of SiO2/Nb2O5/TiO2–SiO2 Broadband Antireflective Coating for the Visible via Acid-Catalyzed Sol–Gel Method

An Abrasion-Resistant and Broadband Antireflective Silica Coating by Block Copolymer Assisted Sol-Gel Method.

Broadband Antireflective Coatings with Different Film Designs by Sol-Gel Method

Preparation and characterization of Superhydrophilic TiO2-SiO2 films for double-layer broadband antireflective coating

Sol-gel derived SiO2 antireflective (AR) coating used in solar cells

Hydrophobic–oleophobic Antireflective Film with Excellent Optical Property Prepared by a Imple Sol–gel Route

Sol–gel derived durable antireflective coating for solar glass

Preparation of mechanically stable triple-layer interference broadband antireflective coatings with self-cleaning property by sol–gel technique

Sol-gel Preparation of a Silica Antireflective Coating with Enhanced Hydrophobicity and Optical Stability in Vacuum

Λ/4-Λ/2 Double-layer Broadband Antireflective Coatings with Superhydrophilicity and Photocatalysis

Preparation of Octyltrimethoxysilane Modified SiO$lt;inf$gt;2$lt;/inf$gt; Hydrophobic Antireflective Coating

Preparation of Antireflective Coatings with High Transmittance and Enhanced Abrasion-Resistance by a Base/acid Two-Step Catalyzed Sol–gel Process

Preparation of Superhydrophilic Silicate Coating by Sol–gel for Double-Wavelength Broadband Antireflective Coatings

Design and preparation of superhydrophobic, broadband and double-layer antireflective coatings