Application of Coagulation-A/O-Coagulation Process in Treatment of Pulping Wastewater
Yan-cheng LI,Ying-mu WANG,Jian ZHOU,Jing-zhou QUAN
2017-01-01
Abstract:Regenerated pulping wastewater has characteristics such as high colority,poor biodegradability,and great difficulty in treatment.By applying the coagulation-A/O-coagulation process in a paper mill in Chongqing,with the daily treatment capacity of pulping wastewater reaching 4 × 104 m3,water qualities of infiuent and effluent in different processing units were analyzed to explore approaches to degrade pollutants.The infrared spectrum analysis results showed that:the pulping wastewater compositions were complicated,with key primary organic contaminants such as phenols,esters,aldehydes,alkynes and aromatic compounds.Through the pre-coagulation and A/O process,the total removal rate of COD and TOC were 96.5％ and 97.5％,respectively.The sharing rate of COD removal of the two processes was 67.2％ and 21.8％,respectively,and that of TOC was 72.7％ and 13.4％,respectively.The color was mainly removed through the pre-coagulation and post-coagulation,with a total removal rate of 98.5％,and the sharing rate of the two processing was 79.2％ and 16.8％,respectively.The GC/ MS analysis indicated that:23 and 12 kinds of organic pollutants existed in the effluents of the A/O and post-coagulation process,respectively,in which 2,4-bis (1,1-dimethylethyl)-phenol and 2-methyldecane had the maximum relative contents,respectively.In addition,the wastewater alkalinity and total hardness were effectively removed by the post-coagulation process,with the removal rates of 87.0％ and 80.8％,respectively.