Abstract:A facile strategy is developed for the synthesis of MnO2 nanoflakes/hierarchical porous carbon spheres (HPCs) nanocomposites via a two-step redox process. The external MnO2 nanoflakes with thickness of similar to 10 nm deposited on the surface of the HPCs result in the formation of hierarchical architecture of the composites, while the internal MnO2 layer stabilizes the interaction between MnO2 nanoflakes and HPCs. The resultant composites still retain porous structure after removal of mesoporous SiO2 template and exhibit relatively high specific surface area. The morphology control of the composites can be easily achieved by varying the initial content of Mn(NO3)(2) and KMnO4. Electrochemical performance of the composites as supercapacitor electrode materials was evaluated by cyclic voltammetry, galvanostatic charge-discharge and electrochemical impedance spectroscopy techniques. The MnO2 nanoflakes/HPCs composite with 75 wt% MnO2 possesses the highest specific capacitance at a high scan rate or current density (417.2 F g (1) at 20 mV s (1) and 326.9 F g (1) at 1 A g (1), respectively) and extraordinary cycling stability (slightly over 100% capacitance retention after 10000 cycles at a scan rate of 100 mV s (1)), which are superior to other reported MnO2/carbon composites. The results suggest that rational design and synthesis of MnO2/porous carbon composite electrode materials with maximum electrochemical active sites is important to further improve their electrochemical performance. (C) 2015 Elsevier Ltd. All rights reserved.

Molten Salt Synthesis of Na‐Mn‐O Composites As Electrode Materials for High‐Performance Supercapacitors

Mn0.5co2.5o4 Nanofibers Sandwiched in Graphene Sheets for Efficient Supercapacitor Electrode Materials

Low-temperature Synthesis of Na2Mn5O10 for Supercapacitor Applications

Manganese Oxide-Based Electrode Behavior As Materials for Electrochemical Supercapacitors

Facile Synthesis and Characterization of MnO2 Nanomaterials As Supercapacitor Electrode Materials

Nanostructured MnO2: Hydrothermal Synthesis and Electrochemical Properties As a Supercapacitor Electrode Material

MnO2 Nanoflakes/hierarchical Porous Carbon Nanocomposites for High-Performance Supercapacitor Electrodes

Influence of Iron Concentration and Post-Annealing Temperature on Structure and Pseudocapacitive Characteristics of a MnO 2 –fe 2 O 3 Nanocomposite

Influence of iron concentration and post-annealing temperature on structure and pseudocapacitive characteristics of a MnO2–Fe2O3 nanocomposite

MnHCF/MnO 2 Core-shell Nanostructures As Cathode Material for Supercapacitors with High Energy Density

MnHCF/MnO2 Core-shell Nanostructures As Cathode Material for Supercapacitors with High Energy Density

Engineering of MnO<sub>2</sub>-based nanocomposites for high-performance supercapacitors

Temperature-controlled fabrication of hydrophillic manganese oxide microspheres as high-performance electrode materials for supercapacitors

Manganese Hexacyanoferrate/mno2 Composite Nanostructures As a Cathode Material for Supercapacitors

Hierarchical Manganese Oxide/Carbon Nanocomposites for Supercapacitor Electrodes

Facile Synthesis of Foamed-Nickel Supporting MnO2 As Binder-Less Electrodes for High Electrochemical Performance Supercapacitors

Facile Fabrication of Mesoporous Manganese Oxides As Advanced Electrode Materials for Supercapacitors

Facile Synthesis of Tremella-Like MnO2 and Its Application As Supercapacitor Electrodes

Synthesis and capacitance performances of Ni–Mn-Oxides as electrode materials for high-performance supercapacitors

Co‐MnO 2 Nanorods for High‐Performance Sodium/Potassium‐Ion Batteries and Highly Conductive Gel‐Type Supercapacitors

High Mass Loading MnO2 with Hierarchical Nanostructures for Supercapacitors