Abstract:Lithium-sulfur (Li-S) battery is regarded as one of the most promising next-generation efficient energy storage systems because of its ultrahigh theoretical capacity of 1675 mAh/g and energy density of 2600 Wh/kg accompanied by the environmental benignity and abundance from natural sulfur. However, the insulating nature of sulfur and the dissolution of the polysulfides Li2S n (4 ≤ n ≤ 8) seriously restrict its practical application. The metastable small sulfur molecules (S2-4) stored in microporous carbon (pore size of <0.6 nm) as the active materials can avoid the production of the soluble polysulfide and solve the shuttle effect thoroughly. In addition, the conductivity of sulfur can be also improved. However, the preparation of microporous carbon materials with reasonable pore size and unique morphology for efficiently encapsulating S2-4 is still challenging. Herein, three flowerlike microporous nitrogen-doped carbon nanosheets with the pore size of <0.6 nm (namely, FMNCN-800, -900, and -1000) as the cathode materials in Li-S batteries were obtained from temperature-dependent carbonization of the metal-organic framework (MOF), Zn-TDPAT, which was from the simply reflux reaction of N-rich ligand H6TDPAT with Zn(II) salt. Our study showed that the FMNCN-900 from carbonization of Zn-TDPAT at 900 °C has suitable pore volume and nitrogen content, accommodating small S2-4 molecules in its micropores with the mass uptake of about 45%. Meanwhile, the appropriate amount of the nitrogen doping and the unique nanostructure of the flowerlike carbon nanosheet in the FMNCN-900 can effectively support its fast electronic transmission and lithium-ion conduction. The resulting S@FMNCN-900 composite cathode material presents the excellent electrochemical property in the Li-S battery (here the carbonate as electrolytes) with a reversible capacity of about 1220 mAh/g at 0.1C after 200 cycles and even 727 mAh/g at 2C after the long-term cycle of 1000 with only around 0.02% capacity loss per cycle. Obviously, the results indicate that the delicate construction of MOF-derived nitrogen-doped microporous carbon nanosheet is a promising strategy to develop novel electrode material for high-performing Li-S batteries.

MoS2‐Nanosheet‐Decorated Carbon Nanofiber Composites Enable High‐Performance Cathode Materials for Mg Batteries

Nanostructured MgFeSiO4/C Cathode Prepared by a Modified Sol-Gel Method for Rechargeable Mg-Ion Batteries

Sulfurized Two‐Dimensional Conductive Metal‐Organic Framework as a High‐Performance Cathode Material for Rechargeable Mg Batteries

MoS2/MoO2 Nanosheets Anchored on Carbon Cloth for High-Performance Magnesium-and Sodium-Ion Storage

3D Interconnected and Multiwalled Carbon@MoS 2 @Carbon Hollow Nanocables as Outstanding Anodes for Na-Ion Batteries.

High‐Rate Nonaqueous Mg–CO2 Batteries Enabled by Mo2C‐Nanodot‐Embedded Carbon Nanofibers

Toward High‐Performance Mg/S Batteries with M4‐Assisted Mg(AlCl4)2/PYR14TFSI/DME Electrolyte and MoS2@CMK/S Cathode

Hierarchical Nanocapsules of Cu-Doped MoS 2 @H-Substituted Graphdiyne for Magnesium Storage

Front Cover: MoS2‐Nanosheet‐Decorated Carbon Nanofiber Composites Enable High‐Performance Cathode Materials for Mg Batteries (chemelectrochem 7/2018)

Large-scale fabricating carbon coating Chevrel phase in molten salts: Implications for high-performance magnesium-ion battery cathode

Copper sulfide nanoparticles as high-performance cathode materials for Mg-ion batteries

Benzoate Anion Derived Carbon-Encapsulated Nis Nanoparticles As a Freestanding Cathode for Magnesium-Based Batteries

Highly defective and conductive Cu-doped 1T/2H-MoS2 nanosheets as high-capacity cathode materials for enhanced magnesium-ion storage

Hydrochloric Acid-Assisted Synthesis of Highly Dispersed MoS<sub>2</sub> Nanoflowers as the Cathode Material for Mg-Li Batteries

MOF-Derived Nitrogen-Doped Porous Carbon Polyhedrons/Carbon Nanotubes Nanocomposite for High-Performance Lithium–Sulfur Batteries

Efficient Encapsulation of Small S2-4 Molecules in MOF-Derived Flowerlike Nitrogen-Doped Microporous Carbon Nanosheets for High-Performance Li-S Batteries

Pillared Vanadium Molybdenum Disulfide Nanosheets: Toward High-Performance Cathodes for Magnesium-Ion Batteries

Carbon Nanofibers Decorated with Molybdenum Disulfide Nanosheets: Synergistic Lithium Storage and Enhanced Electrochemical Performance

Hierarchical 3D Cuprous Sulfide Nanoporous Cluster Arrays Self‐Assembled on Copper Foam as a Binder‐Free Cathode for Hybrid Magnesium‐Based Batteries

Phenylphosphonate surface functionalisation of MgMn2O4 with 3D open-channel nanostructures for composite slurry-coated cathodes of rechargeable magnesium batteries operated at room temperature