Abstract:Diesel engines are currently facing serious challenges to reduce exhaust pollution,especially the particulate soot,which is harmful to human beings.Simultaneous removal of NOx and soot has been studied for the past two decades and perovskite-type LaMO3(M= Co,Mn) proved to be an effective catalyst.In this work,a series of nanostructured K+-doped perovskite-type La1-xKxCoO3 catalysts were prepared by sol-gel method using sucrose as complex agent.The influences of K+ doping and high temperature calcining on the structure and soot oxidation activity of the catalyst were studied by XRD and TPR techniques.The results indicated that nanostructured perovskite catalyst with single phase formed at the temperature higher than 600℃,and it showed much higher activity for soot oxidation in the mixed gas of NO and O2.K+ could be inserted into perovskite lattices,enhancing the phase transformation from cubic to rhombohedral structure.The resulting phase was more stable at high temperatures.The catalyst of La0.90K0.10CoO3(about 30 nm) calcined at 700℃ with rhombohedral structure exhibited the highest activity for soot oxidation in 0.5% NO and 5% O2,which led to the low Tig and Tend as 240 and 387℃ respectively,almost 200℃ lower than the temperature of soot combustion without the catalyst.In the reaction system of soot-NO-O2,both the crystal structure and particle size of the perovskite catalysts were most influential,and the rhombohedral structure together with small size perhaps was beneficial to soot oxidation.

Mechanism of Pd and K Co-Doping to Enhance the Simultaneous Removal of NOx and Soot over LaMnO3

Mechanism of Pd and K co-doping to enhance the simultaneous removal of NO<sub>x</sub> and soot over LaMnO<sub>3</sub>

A Highly Efficient and Porous Catalyst for Simultaneous Removal of NOx and Diesel Soot

Influence of Composition of Perovskite-type Catalysts La_(1-x)A_xB_yMn_(1-y)O_3 on Simultaneous Removal of NO_x and Soot

Efficient Catalysts of K and Ce Co-Doped LaMnO 3 for NO x –Soot Simultaneous Removal and Reaction Kinetics

Efficient Catalysts of K and Ce Co-Doped LaMnO3 for NOx–Soot Simultaneous Removal and Reaction Kinetics

Effect of Partial Substitution of K and Cu in LaMnO3 on Simultaneously Catalytic Removal of NOx and Soot

Facile preparation, catalytic performance and reaction mechanism of Mn x Co 1− x O δ /3DOM-m Ti 0.7 Si 0.2 W 0.1 O y catalysts for the simultaneous removal of soot and NO x

Surface Properties and Catalytic Performance of La0.8K0.2CuxMn1–xO3 for Simultaneous Removal of NOx and Soot

Catalytic Removal of Diesel Soot Particulates over K and Mg Substituted La1 − Xkxco1 − Ymgyo3 Perovskite Oxides

Preparation, Characterization, Catalytic Activity and CO2 Absorption/desorption Studies of Ln/K (ln=la, Sm, Y) Catalysts for Diesel Soot Elimination

Preparation, Structure and Soot Oxidation Performance of Nano-scaled Perovskite-type La1-xKxCoO3 Catalyst

Promotional Effects of Sm/Ce/La Doping on Soot Oxidation over MnCo2O4 Spinel Catalysts

Investigation of catalytic removal of NO_x and soot over La_(0.8)K_(0.2)Cu_(0.05)Mn_(0.95)O_3

A Novel Active Catalyst for Simultaneous Removal of NOx and Soot

Physicochemical and Catalytic Properties of La0.8K0.2CuxMn1-xO3 for Simultaneous Removal of NOx and Soot: Effect of Cu Substitution Amount and Calcination Temperature

Improvement of CO Oxidation and CH4 Combustion by Pd and Pt Partial Substitution on LaMn0.5Cu0.5O3 Perovskite

Preparation of Cordierite Monolith Catalysts with the Coating of K-Modified Spinel MnCo2O4 Oxide and Their Catalytic Performances for Soot Combustion

Effect of Cu Doping on the Structure and Catalytic Activity of LaMnO_3 Catalyst

NO2-aided Soot Oxidation on LaMn0.7Ni0.3O3 Perovkite-type Catalyst

Integrating Pd-doped perovskite catalysts with ceramic hollow fibre substrate for efficient CO oxidation