Individual Determination of Inorganic and Organomercury of Ppt Level in Water by Atomic Absorption Spectrometry Using Silica Gels with Immobilized Chelating Ligands

T YAO,M AKINO,S MUSHA
DOI: https://doi.org/10.2116/bunsekikagaku.31.7_409
1982-01-01
BUNSEKI KAGAKU
Abstract:A method for the determination of pg ml-1 levels of inorganicmercury and organomercuric compounds in water has been developed. They were selectively preconcentrated by using two small sized quartz columns packed with 50 mg of silica gels with immobilized iminoacetate (SIIA) and dithiocarbamate (SIDT), respectively. The sample reservoir and the columns were connected with tygon tubing, and the sample (0.1 M HCl solution) was passed through the two columns at a flow rate of 10 ml min-1. The Hg (II) and organomercurys were respectively concentrated on the upper column (SIIA) and the lower column (SIDT). The columns were then inserted in the furnace of Hitachi Zeeman effect mercury analyzer 501, and the individual concentrations of Hg (II) and organomercurys were determined. Various foreign salts and metal ions did not interfere with the recovery of traces of Hg (II) and organomercurys. The proposed method was applied for the determination of Hg (II) and organomercurys at pg ml-1 concentration level in a synthetic sea water sample. The detection limit of this method was 10 pg ml-1 when 100 ml of sample solution was applied, with a relatively standard deviation of less than 4 %.
What problem does this paper attempt to address?