Abstract:This work investigates the enhancement of thermal transport in polydimethylsiloxane (PDMS) thin films with aligned carbonyl iron particles (CIP) embedded, also known as magnetorheological elastomers (MREs). The flash method is used to measure the effective thermal conductivity of PDMS/CIP thin films in the direction parallel to the magnetic field. Under an external magnetic field, the CIPs form chain-like structures, which become effective thermal paths inside the composites. Hence, a significant increase in the thermal conductivity of aligned MREs has been achieved compared with the composites prepared without a magnetic field. The effects of the volume fraction of CIP and pre-structured magnetic flux density have also been studied. The increase in the CIP volume fraction from 5% to 20% brings about a twofold improvement in the thermal conductivity of the aligned MREs. For 2.5 μm CIP doped MREs with a volume fraction of 10%, when the pre-structured magnetic flux density changes from 0 mT to 100 mT, the thermal conductivity k increases by approximately 50%. However, a further increase in the magnetic field intensity only leads to a slight increase in k. Scanning electron microscopy (SEM) inspections demonstrate that the chain length keeps growing with the strength of the pre-structured magnetic field while the structure transition turns into lateral congregation as the strength of the pre-structured magnetic field reaches 100 mT. A finite element method (FEM) model is proposed to investigate in detail the relationship between the MREs’ thermal conductivity and inner chains. This work provides an effective way to improve thermal conductivity of MREs used for electromagnetic radio-absorbers and builds a connection between the thermal properties of MREs and their inner microstructures.

Effect of the Carbonyl Iron Particles on Acoustic Absorption Properties of Magnetic Polyurethane Foam

Microwave-absorbing properties of linear low-density polyethylene/ethylene-octene copolymer/carbonyl iron powder composites

Smart Polyurethane Foam with Magnetic Field Controlled Modulus and Anisotropic Compression Property

The effect of external magnetic fields on the pore structure of polyurethane foams loaded with magnetic microparticles

Acoustic absorption performance of cavity-backed magnetoactive elastomer film

Magnetic properties of ultrafine MnCo2O4 particles and their influence on sound absorption performance in graphene oxide/polyurethane foam

Preparation and characterization of isotropic polyurethane magnetorheological elastomer through in situ polymerization

Improving the Magnetorheological Properties of Polyurethane Magnetorheological Elastomer Through Plasticization

The Preparation and Performance of Epoxy/Acetylene Carbon Black Wave-Absorbing Foam

Particle mobility and macroscopic magnetorheological effects for polyurethane magnetic elastomers

Magnetic isocyanate-based polyimide composite foam for efficient microwave absorption

Extrusion Foaming Of Lightweight Polystyrene Composite Foams With Controllable Cellular Structure For Sound Absorption Application

Soft matter with magnetically oriented macro - micro structure for improving microwave absorption efficiency

Carbonyl iron powder surface modification of magnetorheological elastomers for vibration absorbing application

A Study of the Heat Transfer Properties of CIP Doped Magnetorheological Elastomers

Preparation, Structure and Properties of Epoxy/Carbonyl Iron Powder Wave-Absorbing Foam for Electromagnetic Shielding

Enhancement by Metallic Tube Filling of the Mechanical Properties of Electromagnetic Wave Absorbent Polymethacrylimide Foam

Influence of Polyurethane Properties on Mechanical Performances of Magnetorheological Elastomers

Acoustic performance of flexible polyurethane composite foams filled with melamine particles

Facile Synthesis of Ultralight and Porous Melamine-Formaldehyde (MF) Resin-Derived Magnetic Graphite-Like C3N4/Carbon Foam with Electromagnetic Wave Absorption Behavior

A comparative study of smart polyurethane foam using RSM and COMSOL multiphysics for acoustical applications: from materials to component