Abstract:In recent years, with the prohibition of CFC by international community, the cascade refrigeration cycle is showing the development of new features, in which Auto-cascade refrigeration cycle with its simple structure, reliable performance particularly has aroused widespread concern. This paper puts forward using the distillation column instead of the multi-stage segregation device, which make full use of the distillation column to provide good enough conditions for the vapour-liquid contact,creat a greater contact surface, ensure the space and time of heat and mass transfer between each component of refrigerant and lubricant, in order to achieve high efficient separation.This cycle uses environment-friendly non-azeotropic mixed (NARM) R600a\R23\R50 as refrigerant. The improved PT equation is used, according to the quality and energy conservation of the distillation column and heat exchanger to carry on thermodynamic analysis. On this basis, the selection and the calculation of the experimental apparatus and equipment carried out to self-made a auto-cascade refrigeration cycle prototype. Through the cooling test of the eight different mixture ratio, the best quality ratio is found and the minimum temperature the ratio can reach. Through repeated experiments, study that the cycle compression ratio of one component affect on the temperature inside the ultra-low temperature box, the cycle compression ratio of the different components under the same temperature inside the ultra-low temperature box affect on the system performance, and the three throttle, cold boxes cycle high and low pressure ratio and distillation column reflux liquid extraction rate affect on the system performance. The prototype broke the traditional method that access to the depth refrigeration needs multiple refrigeration compressors, only use a single-stage air-conditioning refrigeration compressor with lubrication, to achieve high and low boiling point component through the use of distillation devices, including high-performance lubricant separation, successfully reduced to below -80 degrees C, and system stability. According to the results of a series of experiments, analyzed the ratio of working fluid, cycle pressure ratio, distillation column extraction rate of liquid return, increase heat and the expenditure component's effect on the temperature in the ultra-low temperature box and the COP of system.

Equipment compartment temperature and pressure control system and regulation and control method

Numerical Study on Spray Cooling of Aircraft Equipment Cabin

Design of High Pressure Reduction with Expander Pneumatic System' s Controller

Control Strategy for Helicopter Thermal Management System Based on Liquid Cooling and Vapor Compression Refrigeration

A pressure-node based dynamic model for simulation and control of aircraft air-conditioning systems

Evaluation of high-speed aircraft thermal management system based on spray cooling technology: Energy analysis, global cooling, and multi-objective optimization

Protective system of aircraft thermal part

Air separation device working condition fluctuation repairing method

A Museum Storeroom Air-Conditioning System Employing the Temperature and Humidity Independent Control Device in the Cooling Coil

Modelling of Liquid Nitrogen Spray Cooling in an Electronic Equipment Cabin under Low Pressure

Optimum Control Strategy and Performance Simulation of a Constant Temperature and Humidity Air-conditioning System

A Study On A New Auto-Cascade Refrigerating Cycle

Heat Current Method for Analysis and Optimization of a Refrigeration System for Aircraft Environmental Control System

Experimental and Theoretical Assessments on the Systematic Performance of a Single-Stage Air-Source Heat Pump Using Ternary Mixture in Cold Regions

High-temperature and high-pressure water circulation control system and control method thereof

Super-critical fluid spray cooling system and application method thereof

Research on electric vehicle thermal management system with coupled temperature regulation between crew cabin and power battery pack

Study on Heat Transfer Performances Between the High Temperature Pneumatic Duct and the Cabin

Optimized Design and Operation Control of Refrigerant Direct Cooling Thermal Management System for Power Battery

A New Method Of Refrigerant Flow Control In Automotive Air Conditioning

Design and Control of R32 Two-phase Refrigerant Injection System Utilizing Scroll Compressor