Abstract:BackgroundOptical metrology is widely used to measure materials' deformation and mechanical properties but current fundamental research requires more precise measurement of microstructure and deformation in internal materials. Electron backscattered diffraction (EBSD) technique measures crystal orientation in individual grain and high resolution EBSD (HR-EBSD) method provides information about residual strain and GND density.ObjectiveDeformation of two stainless steels Nitronic 60 and Tristelle 5183 with different proportions of ferrite and carbides are characterised.MethodsPush-release bend testing was used to provide progressive increasing bending stress in two iron-based material samples. HR-EBSD and high resolution digital image correlation (HR-DIC) methods characterised residual strain, GND density and plastic strain distributions in each sample. ResultsNitronic 60 and Tristelle 5183 were deformed and obtained 3.8% and 0.9% plastic strain Ɛxx. High GND densities distributed neighbouring grain boundaries in Nitronic 60 while high GND densities distributed around carbides, especially intragranular carbides in Tristelle 5183.ConclusionsHR-EBSD and HR-DIC quantitative characterised deformation in two iron-based alloys, grain/twin boundaries and carbides resulted in GND density increase, promoted work hardening and accumulated high residual elastic strain. Heterogeneous grain/carbide size distribution leaded to stress concentration and cause carbide decohesion and brittle fracture of sample.

The Discrepancy of the Measured Change of D-Electron Occupancy in VxNi100−x and FexNi100−x Alloys Using EELS and Kβ-to-kα X-ray Intensity Ratios

Optimization of the Method to Measure D Electron Occupancy in Transition Elements from Electron Energy Loss Spectrum

3D Occupancy Determination from Fe L2,3 Electron Energy-Loss Spectra of Nanocrystalline-Amorphous Fe73.5Cu1Mo3Si13.5B9 Alloy

Atomic-scale Chemical Imaging and Quantification of Metallic Alloy Structures by Energy-Dispersive X-ray Spectroscopy

Matrix Effect In Quantitative Auger Analysis Of Binary-Alloys - Comparison Between The Measured And The Calculated Values

Chemical Composition of Alloys as Primary Material Property Influencing the Accuracy of Measurements Obtained in Energy-Dispersive X-Ray Spectroscopy (EDS), Wavelength-Dispersive X-Ray Spectroscopy (WDX) and X-Ray Fluorescence (XRF)

Mesoscopic quantitative chemical analyses using STEM-EDX in current and next generation polycrystalline Ni-based superalloys

Acoustic emission spectra and statistics of dislocation movements in Fe<sub>40</sub>Mn<sub>40</sub>Co<sub>10</sub>Cr<sub>10</sub> high entropy alloys

Measuring Chemical Shifts with Energy-Dispersive X-ray Spectroscopy

Angular Dependence of Ag L-X-rays Emission Induced by 20–40 Kev Electron-Impact

Testing the accuracy of low-beam-energy electron-excited X-ray microanalysis with energy-dispersive spectrometry

Exafs Measurements and Reverse Monte Carlo Modeling of Atomic Structure in Amorphous Ni80p20 Alloys

Angular Dependence of L X-Rays Emission for Ag by 10 Kev Electron-Impact

The Effects of Non-Uniform Specimen Thickness on Thickness Determination and Elemental Quantitation with Electron Energy Loss Spectroscopy (EELS)

Study of Optical and Electronic Properties of Nickel from Reflection Electron Energy Loss Spectra

Atomic-scale Chemical Quantification of Oxide Interfaces Using Energy-Dispersive X-ray Spectroscopy

Quantitative Study of Residual Strain and Geometrically Necessary Dislocation Density Using HR-EBSD Method

Neutron Diffraction Study of the Structural and Magnetic Properties of Ε-Fe3n1.098 and Ε-Fe2.322co0.678n0.888

White Lines and 3d-Occupancy for the 3d Transition-Metal Oxides

XPS and NEXAFS Investigation of Electronic Energy Structure of Ti-Ni and TiNi-Cu Alloys

Investigation of Electronic Structures of Ordered and Disordered Ni3Fe by Electron Energy Loss Spectroscopy