Abstract:Over the past few decades, vibration-based structural health monitoring and damage detection have drawn significant research attentions world-wide. The major motivation for such a research emphasis is the need to develop reliable methods to monitor the performance of structures in real-time. Real-time or continuous monitoring is also beneficial for timely maintenance of structure and to avoid any undesired failure. In this study, the efficiency of a few vibration based damage detection approaches has been investigated for identifying damage in a few wall specimens of brick masonry structures. Masonry is one of the most common and oldest material which is being used for constructing buildings for many years. Like concrete, masonry is also a brittle and highly non-linear material with good compressive but poor tensile strength. In masonry structures, damage generally occurs in distributed fashion and the pattern of cracks is often very complex as compared to steel structures. In addition, damping changes with the level of damage. An experimental study using shake table has been performed on a few half-scale wall-specimens. A suit of ground motions were selected based on Indian Code specified design ground motion spectrum. These motions were then scaled from very low intensity to high intensity by introducing amplitude scale factor with respect to the code specified level. The purpose of varying intensity input was to introduce progressive damage when subjected to the these excitations. In between each scale change, shake table tests with low intensity white-noise motions were performed. The purpose of white noise run in between two consecutive level of excitation was to simulate an ambient vibration condition for system identification. The specimens and the shake table were instrumented with accelerometers and displacement sensors to measure the input and responses. Various vibration-based techniques such as frequency domain decomposition and natural excitation technique (NExT) coupled with Eigen realization algorithm (ERA) techniques have been used for extraction of modal properties. It has been found from the experimental results that damage level can be easily correlated with a few damage identification parameters.

Wavelet technique and FEA for modal identification in damaged URM shear walls

Timber shear walls: numerical assessment of the equivalent viscous damping

A SIMPLIFIED ANALYTICAL PROCEDURE FOR SEISMIC ANALYSIS OF TIMBER LIGHT-FRAME SHEAR WALLS

Bamboo Lightweight Shear Walls: Modeling and Identification of Sheathing-to-Framing Connections for Seismic Response Analysis

Structural performance assessment of full-scale masonry wall systems using operational modal analysis: Laboratory testing and numerical simulations

Dynamic characteristics of stone masonry walls before and after damage: Experimental and numerical investigations

In-Plane Lateral Response of a Full-Scale Masonry Subassemblage with and without an Inorganic Matrix-Grid Strengthening System

Synergistic application of operational modal analysis and ambient noise deconvolution interferometry for structural and damage identification in historic masonry structures: three case studies of Italian architectural heritage

Dynamic identification methods and artificial intelligence algorithms for damage detection of masonry infills

Damage Identification in Masonry Wall Specimens: Shake Table Studies

Assessment of Seismic Retrofitting Interventions of a Masonry Palace Using Operational Modal Analysis

Damage monitoring of masonry structures using the acoustic emission technique – From tensile and shear characterization tests to shear wall tests

Detecting Multiple Damages in UHPFRC Beams through Modal Curvature Analysis

Discrete macro - models of nonlinear interlocking mechanisms in the out-of-plane failure of masonry walls

Dynamic characterization of progressively damaged segmental masonry arches with one settled support: experimental and numerical analyses

Numerical homogenization‐based seismic assessment of an English‐bond masonry prototype: Structural level application

Modelling reinforced masonry buildings by a mechanics‐based macroelement approach

Numerical and Experimental Investigation on Cyclic Behavior of Masonry Infill Walls Retrofitted with CFRP

Seismic out-of-plane retrofit of URM walls using timber strong-backs

Macromechanical Failure Criteria: Elasticity, Plasticity and Numerical Applications for the Non-Linear Masonry Modelling

An application of finite element model updating for damage assessment of a two-story reinforced concrete building and comparison with lidar