Abstract:Investigations were conducted on the electrochemical dissolution of cobalt white alloy and the anodic passivation in a sulfuric acid solution. The galvanostatic and potentiodynamic experiments were carried out using PARSTAT 2273. The composition and structure changes of alloy anodes were analyzed by Scanning Electron Microscopy (SEM), Energy Dispersive Spectrometry (EDS) and X-ray Diffraction (XRD). The metal contents in the electrolyte were measured by Atomic Absorption Spectrophotometry (AAS). The results showed that the cobalt white alloy was composed of the Co–Fe alloy matrix phase and the Cu alloy precipitate phase. This multiphase alloy did not dissolve uniformly and was subjected to anodic passivation due to the high silicon content. The passivation occurred due to the generation of colloidal SiO2, which covered the anode surface and hindered the dissolution of the alloy. However, the polarization curves indicate that Cl− could accelerate the electrochemical dissolution of cobalt white alloy. Cl− could be preferentially adsorbed on the anode surface and undermine the SiO2 coating and the passive film on the alloy surface. NH4Cl significantly increased the dissolution rate of the Co–Fe alloy phase by 4–6 times and improved the anode current efficiency by 27.83%. The electrochemical dissolution was selective, which facilitated the separation of valuable metals. Fe and Co were dissolved into the electrolyte while Cu deposited on the cathode. The anode current efficiency in the electroleaching process was 54.6%. The calculated recoveries of Co and Fe were respectively 100.77% and 98.56% after 22h of electroleaching, indicating that the Co–Fe alloy phase was preferentially dissolved.

A Novel Process for Cobalt and Copper Recovery from Cobalt White Alloy with High Silicon

Atmospheric leaching of Co white alloy

A novel strategy for recovery of heavy metals and synthesis of Co-rich alloy from the alkali-treated tungsten residue using photovoltaic silicon kerf waste

Processing of copper converter slag for metal reclamation. Part I: Extraction and recovery of copper and cobalt

An unconventional approach for the efficient recovery of iron, cobalt, copper and silicon from copper slag

An approach of cobalt recovery from waste copper converter slags using pig iron as capturing agent and simultaneous recovery of copper and tin

Advanced Purification Process for Cobalt Sulphate Solution

A potential industrial waste-waste co-treatment process of utilizing waste SO2 gas and residue heat to recover Co, Ni, and Cu from copper smelting slag

A Novel Strategy for the Simultaneous Recovery of Silicon and Copper from Spent Silicon Contact Mass

The influence of Cl- on the electrochemical dissolution of cobalt white alloy containing high silicon in a sulfuric acid solution

Iron and copper recovery from copper slags through smelting with waste cathode carbon from aluminium electrolysis

An Efficient Method of Chromium Extraction from Chromium-Containing Slag with a High Silicon Content

Recovery of Copper and Cobalt from Low-Grade Heterogenite with Reductive Acid Leaching Method

Comprehensive Recovery of Copper-Nickel Alloy Scrap

A new method for recovering valuable metals from low-grade nickeliferous oxide ores

Recovery of Nickel, Copper and Cobalt from Low-Grade Ni–Cu Sulfide Tailings

Recovery of valuable metals from copper slag

Full-component recovery of cobalt-rich waste by sodium carbonate roasting combined with cascade leaching

Separation of silicon and iron in copper slag by carbothermic reduction-alkaline leaching process

Recovery of Cobalt and Copper from Nitric Acid Leaching Solution of Cemented Carbide Scrap

Optimizing the Leaching Parameters and Studying the Kinetics of Nickel and Cobalt Recovery from Xinjiang Nickel–Cobalt Slag