Abstract:Field test results show that about 15% to 40% of building heat loss in China is attributable to poor heating systems regulation. The current method for addressing this problem is to install thermostatic radiator valves (TRVs) to the ends of radiators, a method adapted from northern Europe. However, this method has resulted in poor performance from delayed controlling action due to thermal inertia as well as insufficient system control accuracy. This is further compounded by incorrect operation by system users and a lack of financial incentives to regulate the system if users are not billed for their heat consumption. We present a new method for simultaneously heat controlling and metering. The core challenge is to design a control strategy that will maintain the room’s temperature. Thus, we established dynamic heat transfer models for water flow, the radiator and the building so as to obtain the optimal heating strategy. We also simulated the indoor thermal dynamic performance of the heating system with different heating loads, supply water temperatures, and supply water flow rates using three methods: a continuously changing flow rate (Method 1), a step-change flow rate based on temperature deviation (Method 2) and an intelligent step-change flow rate (Method 3) which predicts the duty cycle of the valve in the proceeding period and controls the valve’s on-time. The simulation results indicate the performance of these three methods. For Method 1, as the room temperature is above the set point, the flow rate can be automatically reduced to a level which is proportional to the room temperature deviation. Further, the scale factor of the flow rate is designed according to the +2°C deviation, so it is accepted that the room temperature is higher than the set point by +2°C using this method. However, this low control precision is unsatisfactory. The mean temperature is higher than the set point and greatly affected by the heating load and supply water’s temperature and flow rate. For Method 2, the controlling action is delayed by thermal inertia, the room temperature fluctuates between the highest and lowest levels, and the temperature deviation can be greater than the set value. For Method 3, both the simulation and field test results showed that room temperature deviation was maintained within a ±0.5°C range under the various conditions. This method appears relatively robust and adaptable, and was the best control strategy of the three methods.

Performance characteristics of variable conductance loop thermosyphon for energy-efficient building thermal control

Preliminary Study on Variable Conductance Loop Thermosyphons

Effect of reservoir on controllable loop thermosyphon

Performance Study of a Constant Temperature and Humidity Air-Conditioning System with Temperature and Humidity Independent Control Device

Energy saving thermal adaptive liquid gating system

Experimental investigation on controllable loop thermosyphon with a reservoir

Characterisation Of A Controllable Loop Thermosyphon For Precise Temperature Management

Experimental Study on the Temperature Management Behaviours of a Controllable Loop Thermosyphon

An Experimental Study Of Thermal Performance Of A Two-Phase Loop Thermosyphon (Tplt)-Based Steam Generator: Effects Of Thermal Boundary Conditions

Experimental study on the passive regulation of a CO2 two-phase thermosyphon loop

Transient performance investigation of a self-driven adaptive thermostatic valve for single-phase space thermal control Loop

Experimental study of mechanical-capillary driven phase-change loop for heat dissipation of electronic devices and batteries

A novel on-off TRV adjustment model and simulation of its thermal dynamic performance

An Investigation on Optimal External Cooling Condition for an Ultra-Thin Loop Thermosyphon-Based Thermal Management System

Thermal characteristics of a two-phase loop thermosyphon with micro-grooved structures inside the evaporator

Performance analysis of water-loop heat pump combined with thermosyphon in buildings without interior zone

A LPV Model-Based Chilled Water Temperature Controller for HVAC Systems

A review on independent and integrated/coupled two-phase loop thermosyphons

Investigation of the thermal response characteristics of the loop thermosyphon under convective boundary conditions

Heat transfer investigation on the thermal energy storage using phase change material in low-carbon building

The temperature-controlled system of variable thermal resistance based on self-powered thermoelectric effect