Abstract:Performance degradation of lithium-ion batteries (LIBs) from in-service abuse was analyzed using novel dynamic abuse tests and sensor-based in-situ monitoring of battery state of health (SOH). The relation between dynamic impact and structure changes of LiCoO2 (LCO) electrode was analyzed through a nano-impact test directly applied to the electrode and Raman imaging. After the electrode structure damage induced by the dynamic loading was analyzed, the performance of the LIBs with the abused electrodes was evaluated to establish the relation between the number of impact cycles and LIB performance degradation. The mechanism of impact related LIB capacity decrease was analyzed, and the capacity change can be predicted based on the impact abuse history using this approach. In order to provide more detailed information on the battery performance degradation caused by the in-service dynamic loads, a dynamic aging testing platform was designed to simulate in-service vibration and impact experienced by the LIBs. Based on the lessons learned, a sensor network was constructed to provide a comprehensive in-situ evaluation of the SOH of commercial batteries. Mechanisms of LIB capacity fade, temperature increase, and cell deformation from cycling in representative dynamic environments were analyzed and correlated with theoretical predictions. Difference between the aging of a battery pack and that of a single cell was also investigated, which presented the influence of current imbalance on the SOH decay of battery packs. SEM imaging, Raman imaging, and electrochemical impedance spectroscopy (EIS) analysis were also applied to support the sensor network measurements. In order to provide an early detection of catastrophic LIB failure such as thermal runaway, an internal resistance temperature detector (RTD) based electrode temperature monitoring approach was developed. By embedding the RTD into LIBs with 3D printing technique, electrode temperature can be collected during ordinary cycling and electrical abuse of LIBs, such as external short circuit and overcharge. The internal RTD presented high measuring efficiency, while there was no interference between the sensor measurement and battery operation. The internal RTD detected the short circuit event and overcharge failure prior of time: the efficiency of the internal RTD was 6-10 times higher than the external RTD in the short circuit test. This provided the chance for early detection and prevention of catastrophic LIB failures. Besides, with the detailed information on electrode temperature evolution during LIB thermal runaway available, the internal RTD also provided the chance to enhance the understanding of the thermal runaway mechanism.

Quantitative Analysis of Eruption Process of Abused Prismatic Ni-rich Automotive Batteries Based on In-Chamber Pressure

Experimental and theoretical analysis of the eruption processes of abused prismatic Ni-rich automotive batteries based on multi-parameters

Experimental Study on Effect of State of Charge on Thermal Runaway Characteristics of Commercial Large-Format NCM811 Lithium-Ion Battery

EXAMINATION OF LITHIUM-ION BATTERY PERFORMANCE DEGRADATION UNDER DYNAMIC ENVIRONMENT AND EARLY DETECTION OF THERMAL RUNAWAY WITH INTERNAL SENSOR MEASUREMENT

Experimental Study of Thermal Runaway Process of 50 Ah Prismatic Nickel-Rich Battery

Experimental and Modeling Analysis of Thermal Runaway for LiNi0.5Mn0.3Co0.2O2/graphite Pouch Cell under Adiabatic Condition

Experimental Study on Thermal Runaway Behavior of Lithium-Ion Battery and Analysis of Combustible Limit of Gas Production

Understanding the Influence of the Confined Cabinet on Thermal Runaway of Large Format Batteries with Different Chemistries: A Comparison and Safety Assessment Study

Experimental Study on the Thermal Runaway and Fire Behavior of LiNi0.8Co0.1Mn0.1O2 Battery in Open and Confined Spaces

Research on the Thermal Runaway Mechanism and Eruption Flame Dynamics of NCM811 Lithium-Ion Battery Stimulated by the Coupling Abuse of Heat and Penetration

Experimental Study on Thermal Runaway and Fire Behaviors of Large Format Lithium Iron Phosphate Battery

Influence of different state of charge on fire characteristics of single 32,650 lithium-ion battery in long-narrow confined space

Assessment on fire risk of lithium-ion battery packs with different sizes and states of charge by cone calorimeter

Experimental Study on the Cell-Jet Temperatures of Abused Prismatic Ni-rich Automotive Batteries under Medium and High States of Charge

Experimental Study on the Thermal Runaway Acceleration Mechanism and Characteristics of NCM811 Lithium-Ion Battery with Critical Thermal Load Induced by Nail Penetration

Refined Study on Lithium Ion Battery Combustion in Open Space and a Combustion Chamber

Fire behavior of lithium-ion battery with different states of charge induced by high incident heat fluxes

Characterization of the deflagration behavior of the lithium-ion battery module within a confined space under different ventilation conditions

Quantitative identification of emissions from abused prismatic Ni-rich lithium-ion batteries

Numerical Analysis of Explosion Characteristics of Vent Gas from 18650 LiFePO<sub>4</sub> Batteries with Different States of Charge

Experimental and Modeling Analysis of Thermal Runaway Propagation over the Large Format Energy Storage Battery Module with Li4Ti5O12 Anode