Abstract:The virtual absence of pressure driven flow inside an elastohydrodynamic lubrication (EHL) contact leads to remarkable similarity between lubricated film thickness and separation by a viscoelastic layer as is suggested by experimental and theoretical results, see [1]. This offers interesting opportunities for mixed lubrication modeling without needing the flow continuity-based Reynolds equation. In this paper numerical simulation of viscoelastic concentrated contact modeling is revisited, first considering the problem of a viscoelastic half-space and a rigid sphere, both in static (squeeze) as well as (frictionless) rolling/sliding conditions. In particular modeling aspects are discussed so that the efficiency of computation of the viscoelastic deformation remains close to the efficiency of computation of an elastic deformation. This is achieved by rewriting Hunter's [2] deformation equation from an integral form into a differential form by applying the Leibnitz integral theorem, even for complex materials with multiple relaxation times to represent complex viscoelastic properties of materials. The approach can be straightforwardly implemented in any (EHL) contact solver regardless of the numerical method. Detailed results are presented, such as the effect of the Deborah number, the relation between the extreme cases of the rolling problem and the static problem, and discussed in detail. In addition to the rigid sphere against a viscoelastic half-space, also the case of two viscoelastic bodies is considered.

A Coupled Eulerian–Lagrangian Model for Sliding Inception of Elastic–Plastic Spherical Contact

An Elastic-Plastic Spherical Contact Model under Combined Normal and Tangential Loading

Evolution of Adhesive Wear and Friction in Elastic-Plastic Spherical Contact

Discrete Element Method Models of Elastic and Elastoplastic Fiber Assemblies

Modeling of Elastic Finite-Length Space Rolling-Sliding Contact Problem

Finite element modelling of frictional thermomechanical rolling/sliding contact using an arbitrary Lagrangian–Eulerian formulation

An Advanced Efficient Model for Adhesive Wear in Elastic—plastic Spherical Contact

Α Model of Computation of Elastic and Plastic Contact Considering Adhesion Effect

On Elasto‐plastic Finite Element Analysis of Some Frictional Contact Problems with Large Sliding

An Explicit Lagrange Constraint Method for Finite Element Analysis of Frictionless 3D Contact/Impact Problems

Research on an adaptive meshless thermo-elasto-plastic contact model

Aspects of modeling and numerical simulation of dry point contacts between viscoelastic solids

Static Friction Behavior of Spherical Contact with Ultrathin Soft Coating

A SAM-FFT based model for 3D steady-state elastodynamic frictional contacts

Surface Tension Effect on the Sliding Inception Between an Elastic Sphere and a Rigid Flat

Modeling of fully coupled thermo-elastic sliding contact of coated systems

Continuum contact models for coupled adhesion and friction

A Simplified Numerical Elastic-Plastic Contact Model for Rough Surfaces

A finite element finite-strain formulation for modeling colliding blocks of Gent materials

A Finite Element Procedure for Sliding Contact Problems Involving Heterogeneous Coefficient of Friction

A Continuous Contact-Force Model for the Impact Analysis of Viscoelastic Materials with Elastic Aftereffect