Abstract:In the mixed-potential gas sensor, the electrode type, particle size, microstructural morphology, as well as the interface state between the oxide-sensitive electrode and the solid electrolyte, are the key factors for determining the magnitude of the mixed potential. NiO-based material with the addition of Y2O3-stabilized 2 O 3-stabilized ZrO2 2 (YSZ) particles is considered as one of the promising sensitive electrode materials for preparing the mixed-potential NOx x sensors due to its excellent gas sensitivity. In this paper, the preparation technology of NiO-sensitive electrodes is developed and optimized for improving NOx x (NO and NO2) 2 ) gas-sensitivity properties of the NOx x sensors. The experimental results show that the addition of YSZ can effectively improve the agglomeration morphology of NiO particles in the NOx-YSZ-based x-YSZ-based electrode material during high temperature sintering (i.e. 1200 degrees C) and enhance the bonding strength with the solid electrolyte. The sensor which was prepared by using the developed NOx-YSZ-based x-YSZ-based electrode material with the YSZ addition of 20 wt% has the most sensitive response characteristic to NO gas, and its response potential value increases with NO gas concentration. Elevating electrode sintering temperature can increase the size of NiO particles and shorten the length of the three-phase boundary (TPB) in the sensitive electrode. The average length of TPB is the longest in the sensitive electrode sintered at 1000 degrees C which corresponds to the best sensitive response to NO gas. The sensitive electrode's thickness also affects the NO response sensitivity, and the sensor with an electrode thickness of 14 mu m has the most NO response sensitivity. In addition, the NO/NO2 2 gas mixture test results indicate that the current developed sensor is more sensitive to NO2 2 gas than that of NO gas.

Study of Response and Recovery Rate of YSZ-based Electrochemical Sensor by Laser Ablation Method

Increasing the Sensitivity of an Amperometric, YSZ-based Total-Nox Sensor by Opening the Gas Diffusion Pathways in a Porous La0.8Sr0.2MnO3 Electrode

Study On Frequency Response Characteristics Of High-Temperature Fiber Optic Sensor Head

Optimizing Triple Phase Boundary in Ysz Based Electrochemical Gas Sensor for Sensing Ppb-Level H2s at Low-Temperature

A YSZ-based mixed potential sensor achieving fast detection and complete recovery to SO 2 through combining a high-temperature pulse and Pd catalyst in sensing electrode

An improved Y2O3-ZrO2 waveguide-fiber-optic sensor for measuring gas flow temperature above 2000°C

Study on High-Temperature Electronic Conductivity and Thermal Shock Resistance of Zirconia Used as an Oxygen Sensor

Low Temperature Preparation of YSZ-based Thin-Film Limiting Current Type Oxygen Sensor

An Improved Y2o3-Zro2 Waveguide-Fiber-Optic Sensor For Measuring Gas Flow Temperature Above 2000 Degrees C

Gas phase reaction combined light-regulated electrochemical sensing technique for improved response selectivity and sensitivity to hydrocarbons

Improving Response Performance of Impedimetric NO2 Sensor Using NiO-YSZ Mixed Conductor Porous Layer

Effect of calcination temperature on sensing performance of YSZ based electrochemical H2S gas sensor with a NiFe2O4 electrode

Response Surface Method Analysis of Gas-Sensitive Properties: Investigating the Influence of External Environment on the Performance of Semiconductor Gas Sensors

Improving response performance of impedimetric NO 2 sensor using NiO-YSZ mixed conductor porous layer

Performance Improvement of NiO/YSZ Sensitive Electrode for High Temperature Electrochemical NOx Gas Sensors

A review of high-temperature electrochemical sensors based on stabilized zirconia

Controlled evolution of surface microstructure and phase boundary ZnO nanoparticles for the multiple sensitization effects on triethylamine detection

Aligned Nanofibers Incorporated Composite Solid Electrolyte for High-Sensitivity Oxygen Sensing at Medium Temperatures

High-sensitivity SO2 Gas Sensor Based on YSZ Electrolyte and SrTiO3 Sensing Electrode

Thermomechanical Responses of YSZ under Ultrashort Thermal Shock Based on the L-S Generalized Thermoelastic Theory

Accelerating the Gas–Solid Interactions for Conductometric Gas Sensors: Impacting Factors and Improvement Strategies