Abstract:The toolpaths for curved surfaces generated by most existing computer-aided-manufacturing applications are always consisted by short line segments. Due to the first-order discontinuity of the short line segment toolpath, the precise following of them must result in frequent acceleration/decelerations, which is easy to excite structural vibration of the machine tools, thus degrading the machining quality. To solve this problem, local corner rounding approaches are widely researched, however, most areas on the toolpath after corner rounding remains linear segments, unlike the global smoothing method who replaces all short line segments to spline curves thus obtaining smoother feed motion. Compared with the local corner rounding method, the global smoothing always requires iterative computes to satisfy the accuracy requirement, which makes it so time consuming that can hardly be utilized in CNC systems. To deal with above problem, this paper proposes a highly stable global smoothing method which does not need iterative computations. This is realized by a control-point-assigning-based global geometric smoothing algorithm and a FIR (Finite Impulse Response) filtering-based global motion smoothing algorithm. During global geometric smoothing, the short line segment toolpath is replaced by piecewise B-spline curve segments whose control points are directly assigned under the error tolerance constraint. During the global motion smoothing, a fast spline interpolation method based on FIR filtering is provided to generate smooth axial position references of the piecewise B-spline curve segments under the axial drive constraint. The whole global smoothing approach does not require pre-processing or iterative computation, which makes it easy to be applied. Extensive illustrations including numerical tests and experimental verification/comparison tests demonstrate the favorable effects of the proposed method in real-time capability and motion smoothing performance. Comparing with typical local corner rounding approach, the proposed global smoothing approach results in shorter motion time and better smoothness. Comparing with typical existing global smoothing method, the proposed method performs better in no required pre-processing and high-order motion smoothness.

A Circumscribed Local Interpolation Methodology for CNC Machining along Linear Tool Paths

A smoothing method of continuous line-segment path in CNC machining based on real-time transformation of interpolation points

Non-redundant tool trajectory generation for surface finish machining based on geodesic curvature matching

Mixed Tiny Path Smoothing Method Based on Sliding Convolution Windows for CNC Machining

A Real-Time Dual NURBS Interpolator with Optimised Control of Flexible Acceleration and Deceleration for Five-Axis CNC Machining

A Local and Analytical Curvature-Smooth Method with Jerk-Continuous Feedrate Scheduling along Linear Toolpath

A Feedrate Planning Method for the NURBS Curve in CNC Machining Based on the Critical Constraint Curve

Optimal curvature-smooth transition and efficient feedrate optimization method with axis kinematic limitations for linear toolpath

A novel time-optimal linear toolpath smoothing method based on airthoid and circular splines for CNC machining

A G4 continuous B-spline transition algorithm for CNC machining with jerk-smooth feedrate scheduling along linear segments

An integrated trajectory smoothing method for lines and arcs mixed toolpath based on motion overlapping strategy

A new toolpath generation method with feed sensitive zones inspection based on inverse evaluation mechanism.

Research on Inverse Evaluation Mechanism in Toolpath Generation Based on Global Interpolation Simulation

Double B-Spline Curve-Fitting and Synchronization-Integrated Feedrate Scheduling Method for Five-Axis Linear-Segment Toolpath

Smoothing interpolation of five-axis tool path with less feedrate fluctuation and higher computation efficiency

A Real-Time C3 Continuous Tool Path Smoothing and Interpolation Algorithm for Five-Axis Machine Tools

Local corner smoothing algorithm for screw motor high-precision machining

Global smoothing of short line segment toolpaths by control-point-assigning-based geometric smoothing and FIR filtering-based motion smoothing

Local asymmetrical corner trajectory smoothing with bidirectional planning and adjusting algorithm for CNC machining

Global smoothing for five-axis linear paths based on an adaptive NURBS interpolation algorithm

Smooth Non-Uniform Rational B-spline (NURBS) Machining with Kinematic Limit for Short Linear Segments