Ultrasmall SnO2 Nanocrystals Embedded in Porous Carbon As Potassium Ion Battery Anodes with Long-Term Cycling Performance

Shaochuan Luo,Tianyi Wang,Hongyan Lu,Xiaoqian Xu,Gi Xue,Nan Xu,Yong Wang,Dongshan Zhou

DOI: https://doi.org/10.1039/d0nj00323a

IF: 3.3

2020-01-01

New Journal of Chemistry

Abstract:Ultrasmall SnO2 nanocrystals embedded in porous carbon as potassium ion battery anodes with long-term cycling performance.

What problem does this paper attempt to address?

Honeycomb-inspired Design of Ultrafine SnO2@C Nanospheres Embedded in Carbon Film As Anode Materials for High Performance Lithium- and Sodium-Ion Battery

Xiang Ao,Jianjun Jiang,Yunjun Ruan,Zhishan Li,Yi Zhang,Jianwu Sun,Chundong Wang

DOI: https://doi.org/10.1016/j.jpowsour.2017.05.064

IF: 9.2

2017-01-01

Journal of Power Sources

Abstract:Tin oxide (SnO2) has been considered as one of the most promising anodes for advanced rechargeable batteries due to its advantages such as high energy density, earth abundance and environmental friendly. However, its large volume change during the Li-Sn/Na-Sn alloying and de-alloying processes will result in a fast capacity degradation over a long term cycling. To solve this issue, in this work we design and synthesize a novel honeycomb-like composite composing of carbon encapsulated SnO2 nanospheres embedded in carbon film by using dual templates of SiO2 and NaCl. Using these composites as anodes both in lithium ion batteries and sodium-ion batteries, no discernable capacity degradation is observed over hundreds of long term cycles at both low current density (100 mA g(-1)) and high current density (500 mA g(-1)). Such a good cyclic stability and high delivered capacity have been attributed to the high conductivity of the supported carbon film and hollow encapsulated carbon shells, which not only provide enough space to accommodate the volume expansion but also prevent further aggregation of SnO2 nanoparticles upon cycling. By engineering electrodes of accommodating high volume expansion, we demonstrate a prototype to achieve high performance batteries, especially high-power batteries. (C) 2017 Elsevier B.V. All rights reserved.
An Elastic Carbon Layer on Echeveria-Inspired SnO2 Anode for Long-Cycle and High-Rate Lithium Ion Batteries

A-Young Kim,Jung Sub Kim,Chairul Hudaya,Dongdong Xiao,Dongjin Byun,Lin Gu,Xiao Wei,Yuan Yao,Richeng Yu,Joong Kee Lee

DOI: https://doi.org/10.1016/j.carbon.2015.07.041

IF: 10.9

2015-01-01

Carbon

Abstract:The commercialization of Sn-based anodes for lithium ion batteries is still hindered due to the inherent volume change leading to a rapid capacity fading during the electrochemical cycle. Inspired by echeveria, a plant that stores sufficient water in its hierarchical leaves to survive in a drought, we report a breakthrough by designing the hierarchical and nanoporous SnO2 electrode encapsulated with ultrathin carbon layer (∼2nm). As evidently captured by in situ transmission electron microscopy, the conformal carbon coating on the surface of anode may provide an elastic cover that suppresses the cracks due to severe volume change, and increases both electrical and ionic conductivity, allowing the cells to exhibit excellent lithium storage performance with more than 800 cycles even with relatively high-rate of current densities.
Sulfur/Nitrogen Co-Doped In-Plane Porous Carbon Nanosheets as Superior Anode of Potassium-Ion Batteries

Guilan Li,Anding Xu,Fulan Zhong,Chuyun Huang,Hao Sun,Zhiguang Xu,Songping Wu,Yurong Yan

DOI: https://doi.org/10.1002/batt.202100379

2022-01-01

Batteries & Supercaps

Abstract:Carbonaceous materials are regarded as prospective anode candidates of potassium-ion batteries. However, the rate capability and cycling stability of classic carbon materials are still far from satisfactory. Herein, we exploit a facile and low-cost strategy to enable the precise synthesis of sulfur/nitrogen co-doped in-plane porous carbon nanosheets with fishnet-shaped microstructure (SN-CNSs). The well-designed in-plane porous structure and the interconnected carbon flake network can accelerate the diffusion of potassium ions, alleviate volume expansion, and provide sufficient active sites. As a result, the SN-CNSs deliver an impressively reversible capacity of 248 mAh g(-1) at a current density of 1 Ag-1 after 4500 cycles, and an excellent rate capacity of 137.3 mAhg(-1) after 4000 cycles under 5 Ag-1. Density functional theory (DFT) calculations further verify the advantage of S/N co-doping in the adsorption/diffusion of K-ion in SN-CNSs materials. Such an excellent performance shows that SN-CNSs possess a great potential to be a superior anode of potassium-ion batteries.
Rational design of porous Sn nanospheres/N-doped carbon nanofibers as an ultra-stable potassium-ion battery anode material

Chao Li,An Tong Bi,Hong Li Chen,Ya Ru Pei,Ming Zhao,Chun Cheng Yang,Qing Jiang

DOI: https://doi.org/10.1039/d0ta11501k

IF: 11.9

2021-01-01

Journal of Materials Chemistry A

Abstract:A hybrid of porous Sn nanospheres encapsulated in N-doped carbon nanofiber frameworks (Sn/N-CNFs) was constructed, and the as-fabricated Sn/N-CNFs exhibited a super-long cycle life, outperforming other Sn-based materials.

materials science, multidisciplinary,chemistry, physical,energy & fuels
SnO2 Nanoparticles Anchored on Carbon Foam As a Freestanding Anode for High Performance Potassium-Ion Batteries

Hailong Qiu,Lina Zhao,Muhammad Asif,Xiaoxiao Huang,Tianyu Tang,Wei Li,Teng Zhang,Tong Shen,Yanglong Hou

DOI: https://doi.org/10.1039/c9ee03682b

IF: 32.5

2020-01-01

Energy & Environmental Science

Abstract:SnO2@CF was obtained by anchoring SnO2 nanoparticles on carbon foam, which exhibited superior electrochemical performance for K+ storage.
High potassium ion storage capacity with long cycling stability of sustainable oxygen-rich carbon nanosheets

Xuechun Li,Huanlei Wang,Wenzhe Zhang,Wenrui Wei,Ranxia Liao,Jing Shi,Minghua Huang,Shuai Liu,Zhicheng Shi

DOI: https://doi.org/10.1039/d0nr08628b

IF: 6.7

2021-01-01

Nanoscale

Abstract:An oxygen-rich carbon nanosheet anode was designed for potassium ion batteries, showing a high specific capacity and superior rate capability, and the oxygen plays a vital role in obtaining superb cycling stability.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
A Robust Integrated SnOx/Carbon Composite Anode for Sodium-Ion Batteries

Jia Xu,Lu Shen,Kai Shi,Tengfei Cao,Wei Lv,Yan-Bing He

DOI: https://doi.org/10.1002/slct.201802425

2018-01-01

ChemistrySelect

Abstract:Tin (Sn) has been considered as a promising anode material for sodium ion battery due to its high specific capacity. However, its poor cycling stability and rate performance hinders the real application. Inspired by the structure of reinforced concrete and tunnel, an integrated SnOx/carbon composite anode was designed for high performance sodium ion batteries. In this structure, the SnOx nanoparticles were embedded in the amorphous carbon with interconnected pores derived from carbonization of the polyacrylonitrile (PAN) and starch, where the amorphous carbon can buffer the bulk expansion of SnOx to maintain structural stability and the interconnected pores can store the electrolyte to promote the sodium ion transportation for high rate reaction of the SnOx particles with sodium ion. The reduced graphene oxide as robust framework similar with rebar is inserted into the amorphous carbon/SnOx composite to enhance the stability and conductivity of composite. The starch as pore-creating additive is decomposed during high-heat treatment to form interconnected tunnel-like pores in SnOx/carbon composite for electrolyte storage and high efficient sodium ion transportation. As a result, the as-prepared integrated SnOx/carbon composite anode shows outstanding rate and cycling performance. Constructing the interconnected pore in SnOx/carbon composite using starch can greatly improve its charge specific capacity and rate performance.
Improving the Lithium Storage Performance of SnO2 Nanoparticles by In-Situ Embedding into a Porous Carbon Framework

Yuning Mao,Qinghua Tian,Fengtao Chen,Jizhang Chen,Li Yang

DOI: https://doi.org/10.1016/j.jallcom.2019.06.251

IF: 6.2

2019-01-01

Journal of Alloys and Compounds

Abstract:Wide attention has been recently paid to the potential application of nanosized SnO2 material in lithium-ion batteries as a new high performance anode owe to its high theoretical specific capacity and moderate working potential. However, the intrinsic problems, such as pronounced volume change and low conductivity, make the capacity decay quickly and rate capability behave badly, therefore severely hindering the practical application of nanosized SnO2 in lithium-ion batteries. Herein, to improve the electrochemical performances, SnO2 nanoparticles have been in-situ embedded into a characteristic porous carbon framework via a facile strategy to form SnO2 nanoparticles/porous carbon framework composite (SnO2 NPs@PC). The as-fabricated SnO2 NPs@PC has three main advantages in lithium storage: Firstly, the good conductive porous carbon framework provides SnO2 with adequate free space (pores) for accommodation of volume change, as well as enhance the conductivity of whole composite; Secondly, the SnO2 NPs@PC with a individual porous architecture has more surface active sites for electrochemical reaction and accessorial contact interfaces between electrode and electrolyte; Finally, the ultrafine SnO2 nanoparticles would have shortened electrons/lithium-ions diffusion distances compared to their bulk counterparts. As a result, the SnO2 NPs@PC gets robust structural stability and improved electrochemical kinetics, therefore exhibits outstanding performances, revealing capacities of 730 and 564 mAh g(-1) at 200 and 1000 mA g(-1) after 400 and even 1000 cycles, respectively. By comparison with the control samples of pure SnO2 NPs and SnO2 NPs@C, it is demonstrated that the electrochemical performances of SnO2 nanoparticles embedded in a well-designedly peculiar porous carbon framework (SnO2 NPs@PC) have been improved significantly. (C) 2019 Elsevier B.V. All rights reserved.
Ultrafine SnO2 anchored in ordered mesoporous carbon framework for lithium storage with high capacity and rate capability

Dongdong Liu,Zengyan Wei,Liming Liu,Hong Pan,Xiaoming Duan,Long Xia,Bo Zhong,Huatao Wang,Dechang Jia,Yu Zhou,Xiaoxiao Huang

DOI: https://doi.org/10.1016/j.cej.2020.126710

IF: 15.1

2021-02-01

Chemical Engineering Journal

Abstract:Improving the reversible capacity and sluggish reaction kinetics of SnO2-based anodes have attracted considerable attention. Herein, an effective strategy by anchoring ultrafine (~5 nm) and high content SnO2 nanoparticles (~90%) in ordered mesoporous carbon framework (SnO2@OMC) is proposed to advance anode materials in lithium ion batteries. The ultrafine SnO2 and ordered mesoporous, which not only shorten the diffusion distance of Li+ and decrease the polarization, but also enhance the conversion reaction of SnO2 and interfacial storage of Li+. Benefiting from the novel strategy and elaborate design, the obtained SnO2@OMC anodes deliver a high reversible capacity (930 mAh g−1 after 150 cycles at 0.2 A g−1) and excellent rate capabilities (321 mAh g−1 at 5 A g−1). After assessment of the rate capability, SnO2@OMC anodes still display stable capacity.

engineering, chemical, environmental
Ultrasmall Sn(OH)4 nanoparticles on the oxidized mesocarbon microbeads as lithium-ion battery anode with high capacity and stable performance

Bo Zhang,Jun-Cheng Zhou,Li-Xin Zhang,Bi-Rong Luo,Guo Ai,De-Jun Li,Yang Zhao

DOI: https://doi.org/10.1016/j.jallcom.2020.158466

IF: 6.2

2021-05-01

Journal of Alloys and Compounds

Abstract:SnO2-based composites have attracted considerable attention as anode for lithium-ion batteries due to their high theoretical capacity and cost-effectiveness. However, capacity fading often occurs due to the severe volume expansion and cracking during cycling. Herein, ultra-small Sn(OH)4 nanoparticles have been deposited on the surface of mesocarbon microbeads (MCMB) via a low-temperature air-oxidation treatment. The in-situ oxygenated functional groups from beta-resin on the surface of MCMB lead to the high loading of Sn(OH)4 nanoparticles with the sizes of 2-3 nm. Interestingly, compared to SnO2, the as-prepared Sn(OH)4 nanoparticles in the composite exhibits a higher reversible specific capacity of 850 mA h g-1 after 50 cycles at a current density of 100 mA g-1. This is because the small sizes of Sn(OH)4 NPs buffer the large volume expansion and remain stable structure during cycling. The electrochemical reaction mechanism of Sn(OH)4 is further clarified, in which the generated LiOH can effectively prevent the Sn agglomeration. LiOH also enables the composite to show low diffusion impedance and better electrochemical performance. Therefore, novel Sn(OH)4/MCMB composite provides the possibility for practical energy storage devices.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Ultrafine SnO 2 /Sn Nanoparticles Embedded into an In Situ Generated Meso-/Macroporous Carbon Matrix with a Tunable Pore Size

Xiaoyan Wang,Ya-Jun Cheng,Suzhe Liang,Qing Ji,Jin Zhu,Yonggao Xia

DOI: https://doi.org/10.1021/acs.langmuir.1c02726

IF: 3.9

2022-01-27

Langmuir

Abstract:Ultrafine SnO2/Sn nanoparticles encapsulated into an adjustable meso-/macroporous carbon matrix have been successfully fabricated by the in situ SiOx sacrificial strategy. The control over the void space in the carbon matrix effectively improves the accessibility of the SnO2/Sn toward an electrolyte solution. More importantly, the void space also provides an efficient means to accommodate the mechanical stress caused by the volume change of the SnO2/Sn over cycles. As a result, the enhanced electrolyte accessibility and suppressed mechanical stress improve the electrochemical performance regarding reversible capacity, cyclic stability, and rate capability. A reversible capacity of 1105 mAh g-1 is still retained after 290 cycles at 200 mAg-1, and the capacity still can keep at 107 mAh g-1 at a high current density of 10 A g-1.

chemistry, multidisciplinary, physical,materials science
In Situ Synthesis of SnO2nanoparticles Encapsulated in Micro/mesoporous Carbon Foam As a High-Performance Anode Material for Lithium Ion Batteries

Xiulin Fan,Jie Shao,Xuezhang Xiao,Xinhua Wang,Shouquan Li,Hongwei Ge,Lixin Chen,Chunsheng Wang

DOI: https://doi.org/10.1039/c4ta04278f

IF: 11.9

2014-01-01

Journal of Materials Chemistry A

Abstract:SnO2 has high capacity but poor cycling stability for Li-ion batteries due to pulverization and aggregation. Herein, we tackle these two challenges by uniformly dispersing carbon coated nanoSnO(2) into a micro-sized porous carbon matrix to form a nano-SnO2/C composite anode using a facile and scalable in situ synthesis strategy. The SnO2@C nanocomposite exhibits a capacity of 640 mA h g(-1) at 500 mA g(-1) in the initial 150 cycles and then increases to 720 mA h g(-1) and maintains this capacity for 420 cycles. The superior electrochemical performance with long cycle lifetimes of the carbon foam-SnO2 nanocomposites could be attributed to their unique carbon microstructures: the network of carbon sheets provides favorable electron transport, while the interconnected micro-/mesopores can serve as the effective channels of lithium ion transport, thereby supplying short lithium ion diffusion pathways. Meanwhile, these pores surrounding the active species of nanoSnO(2) along with flexible carbon nanosheets can accommodate the severe volume variations during prolonged electrochemical cycling and mitigate the Sn aggregation. The present study provides a large-scale synthesis route to synthesize SnO2-based anode materials with superior electrochemical performance for lithium ion batteries.
A nanoscale interlayer void design enabling high-performance SnO2-carbon anodes

Yudong Li,Kui Lin,Xianying Qin,Kun Zeng,Yushan Liu,Yue Xia,Fengzheng Lv,Hua Zhu,Feiyu Kang,Baohua Li

DOI: https://doi.org/10.1016/j.carbon.2021.06.089

IF: 10.9

2021-10-01

Carbon

Abstract:SnO2 is considered as a promising anode material for lithium-ion batteries (LIBs) in view of its high theoretical capacity. However, the large volume change and low reversible capacity of SnO2 anode have restricted its practical application. In this study, the two issues were overcome by fabricating SnO2-carbon composite with an optimized structure: SnO2/carbon nanoclusters, composed of ultrafine SnO2 nanocrystals and carbon boundary, with well-defined interlayer void space were monodispersed encapsulated in graphene-supported carbon framework (denoted SCVC composite). The nanoscale interlayer gap could buffer volume expansion of SnO2. The numerous carbonaceous boundaries between ultrafine SnO2 nanocrystals could prevent Sn/LixSn coarsening, guaranteeing sufficient Sn/Li2O interdiffusion and enhancing conversion fraction of Sn and Li2O to SnO2 during charging. While the graphene-based carbon framework would enable a fast ion/electron transport and stable solid electrolyte interface. As a result, the SCVC-based LIBs delivered a high reversible capacity, ultralong cycling life-span and excellent rate capability. A capacity of 643 mAh g-1 at 5 A g-1 was retained after 1000 cycles for the SCVC anode. A high reversible capacity accessibility of 1239 mAh g-1 could be reached at 0.5 A g-1 for the SnO2 component in SCVC anode.

materials science, multidisciplinary,chemistry, physical
Facile Synthesis of Ultrasmall Tin Oxide Nanoparticles Embedded in Carbon As High-Performance Anode for Lithium-Ion Batteries

Qinghua Tian,Yang Tian,Zhengxi Zhang,Li Yang,Shin-ichi Hirano

DOI: https://doi.org/10.1016/j.jpowsour.2014.07.019

IF: 9.2

2014-01-01

Journal of Power Sources

Abstract:Tin oxide (SnO2) has received great attention as promising anode for lithium ion batteries because it offers a high theoretical capacity (ca. 782 mAh g(-1) for Li4.4Sn) and a safe discharge potential versus Li/Li+ in comparison to commercialized graphite anodes, whereas it also suffer from the drawbacks of the huge volume change and low electronic conductivity during lithiation/delithiation processes. Herein, we have prepared a SnO2/C composite of ultrasmall SnO2 nanoparticles (similar to 6 nm and similar to 59.4% by weight) embedded in carbon matrix (denoted as SnO2/C-59) by a facile hydrothermal and subsequent carbonization approach. In this peculiar architecture, uniform distribution of SnO2, and electronic conductivity of carbon matrix, which can effectively solve the problems of pulverization, loss of electrical contact and particle aggregation during cycling, therefore contributing to excellent lithium storage and cycling stability. A reversible capacity of 839.1 mAh g(-1) is obtained at 200 mA g(-1) after 217 cycles. More importantly, 712.8 mAh g(-1) can be obtained at 800 mA g(-1) even after 378 cycles. (C) 2014 Elsevier B.V. All rights reserved.
Ultrasmall Co3O4 nanoparticles as a long-lived high-rate lithium-ion battery anode.

Changda Wang,C. Chen,Yuyang Cao,Ping Wan,Zhen Yu,Shuang Zhu,L. Song,Wangsheng Chu,Wenjie Wang,Yang Si

DOI: https://doi.org/10.1039/d3dt00127j

IF: 4

2023-03-06

Dalton Transactions

Abstract:Herein, ultrasmall nanostructured Co3O4 particles have been prepared by a facile two-step synthetic method and furthermore applied to lithium-ion batteries. Benefitting from an increased specific surface area and improved tolerance for volume expansion, they deliver an extremely high specific capacity of 1432.7 mA h g-1 at 0.1 A g-1 and an outstandingly long cycle life with about 511.2 mA h g-1 at 10 A g-1 after 2000 cycles. This work will pave a new way to engineer advanced electrode materials for long-lived high-rate lithium-ion batteries.

Chemistry,Medicine,Engineering,Materials Science
Amorphous SnO2 nanoparticles embedded into a three-dimensional porous carbon matrix as high-performance anodes for lithium-ion batteries

Haoyi Mou,Yu Xin,Chang Miao,Shuqing Nie,Shuxin Chen,Wei Xiao

DOI: https://doi.org/10.1016/j.electacta.2021.139286

IF: 6.6

2021-11-01

Electrochimica Acta

Abstract:Amorphous SnO2 nanoparticles embedded into a three-dimensional porous carbon matrix labeled as Am-SnO2@P-C are precisely customized through a phase separation process of tin salts and polyacrylonitrile/polyvinylpyrrolidone/N, N-dimethylformamide polymer mixed solution with the presence of deionized water and combining with heat treatments. The targeted composite powders are characterized by X-ray diffraction, X-ray photoelectron spectroscope, transmission electron microscope, and scanning electron microscope, in which amorphous SnO2 nanoparticles with ultrafine diameters are uniformly distributed across the three-dimensional porous carbon matrix. The Am-SnO2@P-C composite electrode can deliver an initial discharge and charge specific capacity of 1557.6 and 1194.4 mAh/g with an initial coulombic efficiency of 76.7 % at 100 mA/g, and the discharge specific capacity can be retained at 886.4 mAh/g after 200 cycles. Moreover, the Am-SnO2@P-C composite electrode also exhibits great rate capability, in which the electrode can deliver a reversible capacity of 581.1 mAh/g at the current density as high as 1.0 A/g with a capacity retention of 92.8 % after 500 cycles. Furthermore, the kinetics investigations of pseudocapacitive contributions and electrochemical impedance spectroscopy on the as-prepared composite electrodes demonstrate the fast electrochemical kinetics of the Am-SnO2@P-C electrode due to the synergistic effect of the ultrafine size of amorphous SnO2 nanoparticles and the porous carbon matrix. Those findings and understandings of the SnO2 based electrodes may offer some a prospective strategy of the metal-oxide based anodes for lithium-ion batteries in the field of energy storages.

electrochemistry
Synthesis of SnO2versus Sn Crystals Within N-doped Porous Carbon Nanofibers Via Electrospinning Towards High-Performance Lithium Ion Batteries

Hongkang Wang,Xuan Lu,Longchao Li,Beibei Li,Daxian Cao,Qizhen Wu,Zhihui Li,Guang Yang,Baolin Guo,Chunming Niu

DOI: https://doi.org/10.1039/c5nr09305h

IF: 6.7

2016-01-01

Nanoscale

Abstract:The design of tin-based anode materials (SnO2 or Sn) has become a major concern for lithium ion batteries (LIBs) owing to their different inherent characteristics. Herein, particulate SnO2 or Sn crystals coupled with porous N-doped carbon nanofibers (denoted as SnO2/PCNFs and Sn/PCNFs, respectively) are fabricated via the electrospinning method. The electrochemical behaviors of both SnO2/PCNFs and Sn/PCNFs are systematically investigated as anodes for LIBs. When coupled with porous carbon nanofibers, both SnO2 nanoparticles and Sn micro/nanoparticles display superior cycling and rate performances. SnO2/PCNFs and Sn/PCNFs deliver discharge capacities of 998 and 710 mA h g(-1) after 140 cycles (at 100, 200, 500 and 1000 mA g(-1) each for 10 cycles and then 100 cycles at 100 mA g(-1)), respectively. However, the Sn/PCNF electrodes show better cycling stability at higher current densities, delivering higher discharge capacities of 700 and 550 mA h g(-1) than that of SnO2/PCNFs (685 and 424 mA h g(-1)) after 160 cycles at 200 and 500 mA g(-1), respectively. The different superior electrochemical performance is attributed to the introduction of porous N-doped carbon nanofibers and their self-constructed networks, which, on the one hand, greatly decrease the charge-transfer resistance due to the high conductivity of N-doped carbon fibers; on the other hand, the porous carbon nanofibers with numerous voids and flexible one-dimensional (1D) structures efficiently alleviate the volume changes of SnO2 and Sn during the Li-Sn alloying-dealloying processes. Moreover, the discussion of the electrochemical behaviors of SnO2vs. Sn would provide new insights into the design of tin-based anode materials for practical applications, and the current strategy demonstrates great potential in the rational design of metallic tin-based anode materials.
Sandwiched C@Sno2@C Hollow Nanostructures As an Ultralong-Lifespan High-Rate Anode Material for Lithium-Ion and Sodium-Ion Batteries

Jian Qin,Naiqin Zhao,Chunsheng Shi,Enzuo Liu,Fang He,Liying Ma,Qunying Li,Jiajun Li,Chunnian He

DOI: https://doi.org/10.1039/c7ta01936j

IF: 11.9

2017-01-01

Journal of Materials Chemistry A

Abstract:SnO2 is considered a promising anode candidate for both lithium-ion batteries (LIBs) and sodium-ion batteries (SIBs), but suffers from the low electrical conductivity and severe volume variation during repetitive cycling. To circumvent these issues, we developed novel interconnected sandwiched carbon-coated hollow nanostructures, i.e., carbon-shell/SnO2-nanocrystal-layer/hollow-carbon-core (C@SnO2@C HNSs), in which ultrasmall SnO2 nanocrystals (2-5 nm) were tightly confined between the carbon shell and the hollow carbon core. Such a unique structure can not only protect the active materials from direct exposure to the electrolyte as well as restrain the migration and pulverization of the SnO2, but also offer rich void space for buffering the volume changes and complement the electron conductivity of the active materials, thus achieving remarkably enhanced electrical conductivity and structural integrity of the whole electrode. As a consequence, this C@SnO2@C HNS electrode exhibited an extremely outstanding long-life high-rate cycling stability for both LIB and SIB anodes, such as only 8% capacity loss after 1000 cycles at 10 A g(-1) for LIB anode and only 10% capacity loss after 3000 cycles at 4.6 A g(-1) for SIB anodes. As far as we know, this is the best high-rate cycle performance ever reported for SnO2-based SIB anodes.
Amorphous carbon coated SnO2 nanohseets on hard carbon hollow spheres to boost potassium storage with high surface capacitive contributions

Dan Li,Jiaqi Zhang,Syed Musab Ahmed,Guoquan Suo,Lei Feng,Xiaojiang Hou,Yanling Yang,Xiaohui Ye,Li Zhang,Wei (Alex) Wang

DOI: https://doi.org/10.1016/j.jcis.2020.04.045

IF: 9.9

2020-08-01

Journal of Colloid and Interface Science

Abstract:Potassium-ion batteries (KIBs) have becoming a prospective energy storage technique, due to the abundant potassium resources in the earth crust, approximate redox potential and similar electrochemical behavior of potassium and lithium. However, the insufficient capacity, poor stability and volume expansion of electrode materials during charge and discharge are main factors restricting the further development of KIBs. This work reports an amorphous carbon coated SnO2 nanohseets on hard carbon hollow spheres (AC/SnO2@HCHS) anode with enhanced potassium storage performance. The HCHS acts as a carrier for SnO2 nanosheets, providing high electrical conductivity and stable skeleton. The self-assembled SnO2 nanosheets with high surface area ensures sufficient contact with the electrolyte. Amorphous carbon wrapping can not only relieve SnO2 volume expansion but also provide surface-induced capacitive capacity. As a consequence, the AC/SnO2@HCHS anode presents excellent potassium-ion storage performance with high discharge capacity of 346 mAh g-1 at 0.1 A g-1 over 200 cycles, ultra-long cycling lifetime and outstanding rate capability (236 mAh g-1 at 1 A g-1 over 1000 cycles).

chemistry, physical
Nitrogen and Oxygen Co‐Doped Porous Hard Carbon Nanospheres with Core‐Shell Architecture as Anode Materials for Superior Potassium‐Ion Storage

Shaokun Chong,Lingling Yuan,Ting Li,Chengyong Shu,Shuangyan Qiao,Shihong Dong,Zhengqing Liu,Jing Yang,Hua Kun Liu,Shi Xue Dou,Wei Huang

DOI: https://doi.org/10.1002/smll.202104296

IF: 13.3

2021-12-06

Small

Abstract:The investigation of carbonaceous-based anode materials will promote the fast application of low-cost potassium-ion batteries (PIBs). Here a nitrogen and oxygen co-doped yolk-shell carbon sphere (NO-YS-CS) is constructed as anode material for K-ion storage. The novel architecture, featuring with developed porous structure and high surface specific area, is beneficial to achieving excellent electrochemical kinetics behavior and great electrode stability from buffering the large volume expansion. Furthermore, the N/O heteroatoms co-doping can not only boost the adsorption and intercalation ability of K-ion but also increase the electron transfer capability. It is also demonstrated by experimental results and DFT calculations that K-ion insertion/extraction proceeds through both intercalation and surface capacitive adsorption mechanisms. As expected, the NO-YS-CS electrodes show high initial charge capacity of 473.7 mAh g-1 at 20 mA g-1 , ultralong cycling life over 2500 cycles with the retention of 85.8% at 500 mA g-1 , and superior rate performance (183.3 mAh g-1 at 1.0 A g-1 ). The K-ion full cell, with a high energy density of 271.4 Wh kg-1 and an excellent cyclic stability over 500 cycles, is successfully fabricated with K2 Fe[Fe(CN)6 ] cathode. This work will provide new insight on the synthesis and mechanism understanding of high-performance hard carbon anode for PIBs.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology

Ultrasmall SnO2 Nanocrystals Embedded in Porous Carbon As Potassium Ion Battery Anodes with Long-Term Cycling Performance

Honeycomb-inspired Design of Ultrafine SnO2@C Nanospheres Embedded in Carbon Film As Anode Materials for High Performance Lithium- and Sodium-Ion Battery

An Elastic Carbon Layer on Echeveria-Inspired SnO2 Anode for Long-Cycle and High-Rate Lithium Ion Batteries

Sulfur/Nitrogen Co-Doped In-Plane Porous Carbon Nanosheets as Superior Anode of Potassium-Ion Batteries

Rational design of porous Sn nanospheres/N-doped carbon nanofibers as an ultra-stable potassium-ion battery anode material

SnO2 Nanoparticles Anchored on Carbon Foam As a Freestanding Anode for High Performance Potassium-Ion Batteries

High potassium ion storage capacity with long cycling stability of sustainable oxygen-rich carbon nanosheets

A Robust Integrated SnOx/Carbon Composite Anode for Sodium-Ion Batteries

Improving the Lithium Storage Performance of SnO2 Nanoparticles by In-Situ Embedding into a Porous Carbon Framework

Ultrafine SnO2 anchored in ordered mesoporous carbon framework for lithium storage with high capacity and rate capability

Ultrasmall Sn(OH)4 nanoparticles on the oxidized mesocarbon microbeads as lithium-ion battery anode with high capacity and stable performance

Ultrafine SnO 2 /Sn Nanoparticles Embedded into an In Situ Generated Meso-/Macroporous Carbon Matrix with a Tunable Pore Size

In Situ Synthesis of SnO2nanoparticles Encapsulated in Micro/mesoporous Carbon Foam As a High-Performance Anode Material for Lithium Ion Batteries

A nanoscale interlayer void design enabling high-performance SnO2-carbon anodes

Facile Synthesis of Ultrasmall Tin Oxide Nanoparticles Embedded in Carbon As High-Performance Anode for Lithium-Ion Batteries

Ultrasmall Co3O4 nanoparticles as a long-lived high-rate lithium-ion battery anode.

Amorphous SnO2 nanoparticles embedded into a three-dimensional porous carbon matrix as high-performance anodes for lithium-ion batteries

Synthesis of SnO2versus Sn Crystals Within N-doped Porous Carbon Nanofibers Via Electrospinning Towards High-Performance Lithium Ion Batteries

Sandwiched C@Sno2@C Hollow Nanostructures As an Ultralong-Lifespan High-Rate Anode Material for Lithium-Ion and Sodium-Ion Batteries

Amorphous carbon coated SnO2 nanohseets on hard carbon hollow spheres to boost potassium storage with high surface capacitive contributions

Nitrogen and Oxygen Co‐Doped Porous Hard Carbon Nanospheres with Core‐Shell Architecture as Anode Materials for Superior Potassium‐Ion Storage