Abstract:Journal of Low Frequency Noise, Vibration and Active Control, Volume 43, Issue 1, Page 123-143, March 2024. Bolted joints play an important role in aerospace, machinery manufacturing, weapons and other fields, and the contact pressure distribution at the connection interface seriously affects the service performance of the bolts. Contact pressure analysis is an essential basis and reference for structural design, calibration, inspection, and safety monitoring of bolted connection structures. Considering the preload force and frictional contact between the joint components, a block mapping hexahedron mesh generation and finite element modeling method for bolted connections is presented, and the finite element models of single and double bolted structures are constructed. Then, an experimental test platform for measuring contact pressure distribution is constructed. Comparison of finite element analysis results with experimental results for the contact pressure distribution in the single and double-bolted joints; the root mean squared error of contact pressure distribution is less than 5%, which verifies the effectiveness of the finite element models. After that, the models are used to study the contact pressure distribution in single-bolted joints and contact pressure coupling effect of double-bolted joints, and the normal stress distribution features within members and contact pressure distribution contour are revealed for single and double-bolted joint. Finally, the finite element models are adopted to investigate the effects of the clamping length, preload, material properties, hole clearance, and bolt size on contact pressure distribution in single-bolted joints. The coupling effect of contact pressure distribution in double-bolted joints under different preloads and geometric parameters are also examined.

Non-uniform Virtual Material Modeling on Contact Interface of Assembly Structure with Bolted Joints

Interface Contact Pressure-Based Virtual Gradient Material Model for the Dynamic Analysis of the Bolted Joint in Machine Tools

Contact Characteristic Parameters Modeling for the Assembled Structure with Bolted Joints

Modeling Tangential Friction Based on Contact Pressure Distribution for Predicting Dynamic Responses of Bolted Joint Structures

Simulation and experimental study on contact pressure distribution of contact interface in single and double bolted connection structures

An Efficient Method for Nonlinear Characteristic Analysis of Fixed Contact Surface and Interface in Bolted Joint and Its Application

Finite Element Analysis and Mathematical Characterization of Contact Pressure Distribution in Bolted Joints

Modeling and nonlinear dynamic analysis of bolt joints considering fractal surfaces

Modeling Method For Bolted Joint Interfaces Based On Transversely Isotropic Virtual Materials

Contact Stress and Linearized Modal Predictions of As-Built Preloaded Assembly

Numerical Modeling and Analysis of Nonlinear Dynamic Response for a Bolted Joint Beam Considering Interface Frictional Contact

An Improved Contact Parameter Model with Elastoplastic Behavior for Bolted Joint Interfaces

In Situ Measurements of Interfacial Contact Pressure During Impact Hammer Tests

Effects of Contact Between Rough Surfaces on the Dynamic Responses of Bolted Composite Joints: Multiscale Modeling and Numerical Simulation

Member stiffnesses and interface contact characteristics of bolted joints

Dynamic modeling of bolted joints for radially segmented annular virtual material considering thickness

The Study On Nonlinear Dynamic Behaviors Of The Structures With Bolted-Flange Joint

A Review of Cross-Scale Theoretical Contact Models for Bolted Joints Interfaces

Influence of the Contact Interfaces on the Dynamics and Power Flow Behavior of the Bolted Structure

A Detailed Finite Element Analysis of Composite Bolted Joint Dynamics with Multiscale Modeling of Contacts Between Rough Surfaces

Experimental and Theoretical Studies on Friction Contact of Bolted Joint Interfaces