Abstract:Thin-walled cold-formed steel (CFS) structures are widely used in low-storey buildings and are seeing increased applications in multi-storey buildings as well as long-span structures. The bolted connection is one of the most common types of fasteners employed in CFS structures. The bolt slippage and load-bearing mechanism in CFS connections have a significant influence on the structural behaviour of cold-formed steel construction assemblies, which are typically numerically simulated using spring/connector elements. However, the determination of input parameters for the spring/connector elements generally requires load-deformation characteristics obtained from physical tests of lap joints, which are costly and time-consuming. Moreover, the use of spring/connector elements fails to explicitly capture the bolt bearing behaviour, resulting in inaccuracy in the simulation of CFS connections. In this paper, an accurate, efficient and robust numerical method that can fully replicate the behaviour of CFS connections considering both the effects of bolt slippage and bearing has been introduced. In the proposed numerical methodology, the cold-formed plates are modelled using the conventional shell elements, while a number of solid elements are introduced around the bolt holes, enabling the bolt-plate interaction to be explicitly accounted for, with contact pairs defined between the bolts and their surrounding solid element surfaces. The proposed numerical method could find a convergence solution using dynamic implicit solver in the general-purpose finite element (FE) software ABAQUS. Good agreement between the FE models using the proposed method and the available test results of CFS bolted connections were achieved, which sheds light on the promising application of the proposed method for simulating CFS assembled using bolted connections.

Finite Element Analysis and Mathematical Characterization of Contact Pressure Distribution in Bolted Joints

Contact Characteristic Parameters Modeling for the Assembled Structure with Bolted Joints

Simulation and experimental study on contact pressure distribution of contact interface in single and double bolted connection structures

Member stiffnesses and interface contact characteristics of bolted joints

Factors Affecting Contact Pressure Distribution on Bolted Joint Interface

Non-uniform Virtual Material Modeling on Contact Interface of Assembly Structure with Bolted Joints

Numerical modelling of lockbolted lap connections for aluminium alloy plates

An Improved Contact Parameter Model with Elastoplastic Behavior for Bolted Joint Interfaces

Numerical Analysis on Mechanical Property of Bolted Joint

An Improved and Robust Finite Element Model for Simulation of Thin-Walled Steel Bolted Connections

Optimization Design for Bolted Joint Surface Shape by Contact Pressure Homogenization

Finite element analysis of bolted joints under torsional loads

Contact Pressure Model of Fastener Interface with Stress Singularities

Tightening performance analysis of bolted connection considering non-parallel contact

Theoretical and Experimental Study on Electrical Contact Resistance of Metal Bolt Joints

Contact Pressure Distribution and Pressure Correction Methods of Bolted Joints under Mixed-Mode Loading

Analytical Modeling of Axial Stiffness of Tensile Bolted Joints under Concentric External Load

Interface Contact Pressure-Based Virtual Gradient Material Model for the Dynamic Analysis of the Bolted Joint in Machine Tools

Prediction of contact stress in bolted joints using the Polynomial Chaos-Kriging model

A Stiffness Model for Bolted Joints Considering Asperity Interactions of Rough Surface Contact

Load Distribution of Bolted Joint