Abstract:Objective To evaluate and analyze the statistical distribution of patient dose during different examinations by using the data stored in a DICOM image archive of a direct digital radiography system. Methods An automatic procedure to extract dose data and exposure parameters from the image archives was implemented. 5160 images were collected from a Zhejiang province hospital including chest PA and LAT, thoracic spine AP and LAT,lumbar AP and LAT,abdomen and pelvis. Exposure parameters and the dose area product (DAP) stored in the image DICOM head were examined for each image. The entrance surface dose (ESD) was estimated considering the DAP and the geometric parameters during each examination. Results Thoracic spine AP and LAT,lumbar LAT and abdomen AP DAP had a variable coefficient below 60% , while the others ranged from 60% to 80% .Compared with DAP at different locations, the ratios between the maximum and the minimum value of DAP were high except for abdomen AP that the maximum value was 3 times than the minimum value. The ratios between the maximum and minmun value for PAP lumbar AP, lumbar LAT, thoracic spine LAT, chest PA and LAT, pelvis PA and thoracic spine PA were 46, 30, 23, 23, 18s, 16 and 11, respectively. The ESD values obtained were substantially lower than DRL. DRL were over three times more than the 3rd quartile value of ESD distribution for the chest PA and LAT, lumbar AP and LAT. DRL were over five times more than the 3rd quartile value of ESD distribution for the abdomen and pelvis AP, thoracic spine AP and LAT projections. Conclusions There are great variation between DAP and ESD distributions. The radiographic device allows substantial dose savings compared with estimations made for nondigital or for phosphor-plate based systems. Frequent patient dose audits should occur when digital techniques are introduced. The quality management in image quality and patient dose in digital radiology should be necessary. Key words: Direct radiography; DICOM; Entrance surface dose; Diagnostic reference level

Estimation of the Entrance Surface Dose from the Dose Indicator in Computed Radiography System

Patient Entrance Surface Dose Estimation of Clinical X-ray Radiography:A Review

Patient Doses in Different Projections of Conventional Diagnostic X-ray Examinations.

A model for estimating peak skin dose in CT

Progress on Characterizing and Evaluating Radiation Doses to Examinees from X-ray Diagnosis

Modeling the Correlations Between Radiation Dose and Scanning Parameters of XVI Cone Beam CT

Radiation Exposure to Patients During Examinations of Direct Radiography System

Dose-Area-Product (Dap) Modelling Of Siemens Max-Series X-Ray Digital Radiography (Dr) Systems

SU-EE-A4-06: Organ-Specific Adjustment Factors for Calculating Dose from Any CT Scanner

Study on Estimation Methods of Absorbed Dose to Eye Lens of Infants from CT Head and Neck Scanning Based on One-Year Old Anthropomorphic Phantom

Investigation and Assay of Patients Received Interventional Radiology Procedures:a Single Center Experience

[The Study for Standardization of Dose Evaluation Method in Cone-beam CT]

Evaluation of coefficients to derive organ and effective doses from cone-beam CT (CBCT) scans: a Monte Carlo study

Absorbed Dose Model to Scan Parameters in Dental Cone Beam Computed Tomography

Simulation and Analysis of CT Examination Doses to Typical Patients Based on Chinese Reference Human Phantoms

Evaluation of patient doses due to fluoroscopic exposures

A Method to Model the X-ray Response of Electronic Portal Imaging Device

Environmental Monitoring and Evaluation of the X-Ray Field Flaw Inspection Workplace in a Factory Building

Estimation of Patient Radiation Doses Form Conventional X-ray Radiography

Variation of Patient Imaging Doses with Scanning Parameters for Linac-Integrated Kilovoltage Cone Beam CT

Dose Levels of Medical Exposure from Diagnostic X-ray Examinations in 2007 in Shanghai