Abstract:Nitrogen doping in carbon nanotubes (CNTs) is of great interest because it endows the inherently inert surface of CNTs with a variety of chemical functionalities. For instance, nitrogen-doped carbon nanotubes (NxCNTs) have been shown a promising electrode catalyst support for polymer electrolyte membrane fuel cells because the doped nitrogen atoms can promote a high dispersion of the metal catalyst nanoparticles on the NxCNT surface, which is essential for achieving a high utilization and thus high catalytic performance. However, beyond the role in nanoparticle dispersion, how nitrogen doping affects the catalytic performance in the anode and in the cathode of a realistic membrane-electrode-assembly (MEA), still remains elusive. In this report, we performed a comparative study of NxCNTs at three different N doping levels as the anode and cathode catalyst support in both rotating disk electrode (RDE) and realistic direct methanol fuel cell (DMFC) test. Our results show that nitrogen doping can play significantly conflicting roles in the anode and cathode performance: (i) A very low doping level (1at.%) is sufficient to induce a homogenous distribution of both anode (PtRu) and cathode (Pt) catalyst nanoparticles. (ii) In RDE test, while nitrogen doping can substantially increase the specific activity of the anodic methanol oxidation, it brings no specific activity enhancement in the cathodic oxygen reduction reaction (ORR), suggesting that nitrogen doping can hardly affect the ORR electrocatalysis on the Pt surface. (iii) In MEA test, a low nitrogen doping level at 1 at.% in NxCNTs as anode catalyst support resulted in a higher power density compared to non-doped CNT support at both 30 and 60°; increasing nitrogen-doping content decreased the power density, likely due to a decreased electron conduction. In contrast, at the cathode, NxCNTs support mainly showed a lower power density, particularly at 60°, which is rationalized by the increased hydrophicility and thus unflavored removal of the water. Taken together, our results provide important guidelines for application of NxCNT support at the appropriate electrode of DMFCs.

A first principle and experimental study on the influences of doping nitrogen on the performance of amorphous carbon films in the application for proton exchange membrane fuel cells

A First Principles And Experimental Study On The Influence Of Nitrogen Doping On The Performance Of Amorphous Carbon Films For Proton Exchange Membrane Fuel Cells

Amorphous Carbon Films Doped with Silver and Chromium to Achieve Ultra-Low Interfacial Electrical Resistance and Long-Term Durability in the Application of Proton Exchange Membrane Fuel Cells

Niobium doped amorphous carbon film on metallic bipolar plates for PEMFCs: First principle calculation, microstructure and performance

The frequency of pulsed DC sputtering power introducing the graphitization and the durability improvement of amorphous carbon films for metallic bipolar plates in proton exchange membrane fuel cells

Structure and Performance of N-Doped Amorphous Carbon Films (A-C: N) on Stainless Steel Surfaces for Bipolar Plates in Proton Exchange Membrane Fuel Cells

Nitrogen-doped carbon nanostructures and their composites as catalytic materials for proton exchange membrane fuel cell

Electronic Transport and Corrosion Mechanisms of Graphite-Like Nanocrystalline Carbon Films Used on Metallic Bipolar Plates in Proton-Exchange Membrane Fuel Cells

Characteristics of Amorphous Carbon Films to Resist High Potential Impact in PEMFCs Bipolar Plates for Automotive Application

Interface-induced degradation of amorphous carbon films/stainless steel bipolar plates in proton exchange membrane fuel cells

Conflicting Roles of Nitrogen Doping in Carbon Nanotubes As Anode and Cathode Catalyst Support for Direct Methanol Fuel Cells

Nitrogen Doping Effects on Carbon Nanotubes and the Origin of the Enhanced Electrocatalytic Activity of Supported Pt for Proton-Exchange Membrane Fuel Cells

The effect of Cr doped in amorphous carbon films on electrical conductivity: Characterization and mechanism

Mechanisms of growth, properties and degradation of amorphous carbon films by closed field unbalanced magnetron sputtering on stainless steel bipolar plates for PEMFCs

Optimizing Catalyst Layer Structure with Carbon Nanofiber Additive for Better Performance of Proton Exchange Membrane Fuel Cell

Application of nitrogen-doped carbon powders as low-cost and durable cathodic catalyst to air-cathode microbial fuel cells.

Synergistic effects of N-doping and mesoporous structures in block copolymer-derived three-dimensionally ordered mesoporous carbon for PEMFC

Composition optimization of multilayered chromium-nitride-carbon film on 316L stainless steel as bipolar plates for proton exchange membrane fuel cells

Impact of Film Thickness on Defects and the Graphitization of Nanothin Carbon Coatings Used for Metallic Bipolar Plates in Proton Exchange Membrane Fuel Cells.

Evaluation of vacuum heat-treated α-C films for surface protection of metal bipolar plates used in polymer electrolyte membrane fuel cells

Performance Enhancement of Proton Exchange Membrane Fuel Cell through Carbon Nanofibers Grown In Situ on Carbon Paper