Abstract:This study investigates the microscopic mechanism of the force on particles of different particle sizes in the asphalt mixture during rutting formation. The gradation was optimized by analyzing the particle force results. The enhanced discrete element method (EDEM) was used to simulate the rutting test, study the correlation state between different particle sizes in the rutting process, and analyze the rutting of asphalt pavement from the aggregate level. From a microscopic perspective, the specific forces acting on particles at different times were determined to investigate the particle size range of stressed particles in two types of asphalt mixtures. Furthermore, the role of particles with different sizes in the rutting process was analyzed. The force limit values of particles with different particle sizes are fitted, and the force of particles in two types of asphalt mixtures is compared and analyzed. After that, the gradation of the asphalt mixture is optimized, and the feasibility of the gradation optimization method is verified by laboratory experiments. The results show that the change rule of the rutting simulation test is gradually transformed from compacted rutting to unstable rutting. The force of the asphalt concrete-13 (AC-13) asphalt mixture is borne by the particles with a radius greater than 1.8 mm. The force of the stone matrix asphalt-13 (SMA-13) asphalt mixture is borne by the particles with a radius greater than 3.6 mm, and the small particle size particles play a filling role. When the particle radius is less than 5.1 mm, the force value of AC-13 asphalt mixture particles is greater than that of SMA-13. When the particle radius exceeds 5.1 mm, the force value of SMA-13 asphalt mixture particles is greater than that of AC-13. The force of particles with a radius of 5.7 mm and 7.3 mm in the SMA-13 asphalt mixture is 30% higher than that in AC-13, and the force limit of particles is proportional to the particle size. The dynamic stability, flexural tensile strength, water immersion residual stability, and freeze-thaw splitting strength ratios of the optimized asphalt mixture are improved compared with those before optimization. The AC-13 asphalt mixture is increased by 8.5%, 9.2%, 1.6%, and 1.9%, respectively, and the SMA-13 asphalt mixture is increased by 10.6%, 7.3%, 0.7%, and 2.1%, respectively. It shows that the grading optimization method is feasible.

Measurement of Coarse Aggregates Movement Characteristics Within Asphalt Mixture Using Digital Image Processing Methods

Mechanical Evaluation of Aggregate Gradation to Characterize Load Carrying Capacity and Rutting Resistance of Asphalt Mixtures

Analysis of Movement Track of Coarse Particles During Rutting Test of Asphalt Mixture

Interlocking Evaluation of Mesoscopic Skeleton with the Compaction Degree of Hot-Mix Asphalt

Investigation on the Micro Deformation Mechanism of Asphalt Mixtures under High Temperatures Based on a Self-Developed Laboratory Test

Investigation of motion of coarse aggregates in asphalt mixture based on virtual simulation of compaction test

Evaluation of Rutting Performance of Asphalt Mixture Based on the Granular Media Theory and Aggregate Contact Characteristics

Influence of Aggregate Geometric Features on Permanent Deformation of Asphalt Mixture Based on Image Processing and Data Mining

Study of Movement of Coarse Aggregates in the Formation Process of Asphalt Mixture in the Laboratory

Effect of the Contact Structure Characteristics on Rutting Performance in Asphalt Mixtures Using 2D Imaging Analysis

Mesoscopic Mechanical Properties of Aggregate Structure in Asphalt Mixtures and Gradation Optimization

Contact characterization of asphalt mixture using image process

A new method for particle motion analysis of asphalt mixture by wired and wireless intelligent aggregate

Modelling and Evaluation of Aggregate Morphology on Asphalt Compression Behavior

Influence of Aggregate Motion Related to Rutting Depth of Asphalt Mixture Based on Intelligent Aggregate and DEM

Study on Rutting Test of Asphalt Mixtures Based on Digital Image Processing Technique

Deformation analysis of asphalt mixtures with digital image correlation method

Evaluation of Morphological Characteristics of Fine Aggregate in Asphalt Pavement

Gradation design of the aggregate skeleton in asphalt mixture

Gradation Optimization Based on Micro-Analysis of Rutting Behavior of Asphalt Mixture

Experimental and Numerical Analysis on Mesoscale Mechanical Behavior of Coarse Aggregates in the Asphalt Mixture during Gyratory Compaction