Abstract:The paper described a new method for crude oil-water separation by means of superhydrophobic melamine sponges impregnated by deep eutectic solvents (MS-DES). Due to the numerous potential of two-component DES formation, simple and quick screening of 156 non-ionic deep eutectic solvents using COSMO-RS (Conductor-like Screening Model for Real Solvents) computational model was used. DES which were characterized by high solubility of hydrocarbons and the lowest water solubility were synthesized and embedded on melamine sponges. The new sponges were characterized by Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), X-ray diffraction (XRD), and goniometer. Several parameters affecting the crude oil-water separation (i.e. type and amount of DES, density and porosity of sponges, water contact eagle) were thoroughly studied. In order to studies of MS-DES affinity to the selected groups of crude oil i.e. Saturated, Aromatic, Resins, Asphaltenes (SARA) the thin layer liquid chromatography-flame ionization detection (TLC-FID) was used. The obtained results indicate that the melamine sponges impregnated by DES composed of eucalyptol and menthol in 1:5 molar ratio have high real crude oil absorption capacity in the range of 96.1 - 132.2 g/g and slightly depends on crude oil compositions, superhydrophobic properties (water contact angle 152°), low density of 9.23 mg/cm3, high porosity of 99.39%, and excellent reusability which was almost not changing even after 80 cycles. The outcomes indicate that new MS-DES materials could be excellent alternatives as absorbents for the cleanup of crude oil-polluted water.

Carboxylated Wood-Based Sponges with Underoil Superhydrophilicity for Deep Dehydration of Crude Oil

Wood Sponge for Oil–Water Separation

Superhydrophobic wood sponge with intelligent pH responsiveness for efficient and continuous oil-water separation

Wood sponge with photothermal, magnetically driven, and superhydrophobic characteristics for high-viscosity oil–water separation

Wood Sponge Reinforced with Polyvinyl Alcohol for Sustainable Oil–Water Separation

Superhydrophobic nanoporous polymer-modified sponge for in situ oil/water separation

Low-temperature carbonization synthesis of carbon-based super-hydrophobic foam for efficient multi-state oil/water separation

Superhydrophobic melamine sponges with high performance in oil/organic solvent sorption

Compressible Carbon Sponges from Delignified Wood for Fast Cleanup and Enhanced Recovery of Crude Oil Spills by Joule Heat and Photothermal Effect

Hydrophobic modified melamine sponge for highly effective remediation of crude oil in water and soil

Superhydrophobic sponges based on green deep eutectic solvents for spill oil removal from water

Robust superhydrophobic polyurethane sponge functionalized with perfluorinated graphene oxide for efficient immiscible oil/water mixture, stable emulsion separation and crude oil dehydration

Mechanically robust polybenzoxazine/reduced graphene oxide wrapped-cellulose sponge towards highly efficient oil/water separation, and solar-driven for cleaning up crude oil

An environmentally friendly and superhydrophobic melamine sponge self-roughened by in-situ controllably grown polydopamine nanoparticle for efficient oil-water separation

Biomimetic Fabrication of Superhydrophobic Loofah Sponge: Robust for Highly Efficient Oil-Water Separation in Harsh Environments

Superhydrophobic Melamine–Formaldehyde Sponge Functionalized by Coupling Agent–Isocyanate Siloxane as Efficient Absorbents for Oil and Organic Solvents

Mussel-Inspired and In Situ Polymerization-Modified Commercial Sponge for Efficient Crude Oil and Organic Solvent Adsorption

Green Preparation of Robust Hydrophobic β-Cyclodextrin/Chitosan Sponges for Efficient Removal of Oil from Water

Scalable fabrication of efficient and recycling wood residue-derived sponge for crude oil adsorption

Superhydrophobic and photothermal sponge for effective oil/water separation and solar‐assisted recovery of viscous oil

Facile preparation of superhydrophobic porous wood for continuous oil-water separation