Abstract:As the amount of oily wastewater discharged from industrial and domestic sources increases, materials used for oil/water separation have received widespread research attention in recent years. However, many reported separation materials with special wetting properties require complex and environmentally unfriendly preparation processes. Therefore, green and efficient materials for oily wastewater and emulsion separation are urgently needed. In this paper, inspired by the scrobiculate and honeycomb-shaped porous structure of natural balsa wood, functionalized wood was designed as an oil/water separation and emulsion purification material by delignification and a simple surface modification process. A deep eutectic solvent (DES) was used to remove the lignin and hemicellulose components. Sodium carboxymethyl cellulose (CMC) and chitosan quaternary ammonium salt (CQA) were used to functionalize and obtain the superhydrophilic/underwater superoleophobic wood material. The water contact angle of the functionalized wood in air reached 0°, while the underwater contact angles for different kinds of oil were greater than 150°. Various oils were effectively separated with a high separation efficiency (> 99.2%). Moreover, the separation efficiency of kerosene from water still reached 99.5% after 30 separation test cycles. After long-term immersion in different pH and salt solutions, the separation efficiency for a kerosene/water mixture was still greater than 99%. Rapid and continuous oil/water separation was achieved conveniently. More importantly, the selective wetting properties and complex porous structure of the functionalized wood enabled the purification of unstable and surfactant-stabilized oil-in-water emulsions with high separation efficiencies. The functionalized wood material also showed promising antibacterial properties, with a good inhibitory effect on the growth of both Gram-positive S.aureus and Gram-negative E.coli . This will effectively prevent contamination and the decrease in separation efficiency caused by mold on the surface. Therefore, this green, efficient, easily prepared, and durable functionalized wood shows excellent potential for application as a separation material for oily wastewater.

Facile preparation of superhydrophobic porous wood for continuous oil-water separation

Facile fabrication of superhydrophobic wood slice for effective water-in-oil emulsion separation

Natural polyelectrolyte-functionalized superhydrophilic and antibacterial wood for efficient oil/water separation

Facile preparation of durable superhydrophobic DTMS@HKUST-1 wood membrane for continuous oil-water separation in harsh conditions

Construction of superhydrophobic PDMS@MOF-199/wood sponge hybrid membrane for ultrahigh-flux gravitational oil/water separation

In-situ growth strategy to fabricate superhydrophobic wood by Na3(Cu2(CO3)3OH)∙4H2O for oil/water separation

Facile fabrication of superhydrophobic wood aerogel by vapor deposition method for oil-water separation

Biodegradable, superhydrophobic walnut wood membrane for the separation of oil/water mixtures

Green, Biodegradable, Underwater Superoleophobic Wood Sheet for Efficient Oil/Water Separation.

Fabrication of Green Superhydrophobic/Superoleophilic Wood Flour for Efficient Oil Separation from Water

Durable, flexible, and super‐hydrophobic wood membrane with nanopore by molecular cross‐linking for efficient separation of stabilized water/oil emulsions

Superhydrophobic wood sponge with intelligent pH responsiveness for efficient and continuous oil-water separation

A water solvent-assisted condensation polymerization strategy of superhydrophobic lignocellulosic fibers for efficient oil/water separation

Wood Sponge Reinforced with Polyvinyl Alcohol for Sustainable Oil–Water Separation

Construction of sustainable, fireproof and superhydrophobic wood template for efficient oil/water separation

Wood Nanotechnology for Strong, Mesoporous, and Hydrophobic Biocomposites for Selective Separation of Oil/Water Mixtures

A Hydrogel‐coated Wood Membrane with Intelligent Oil Pollution Detection for Emulsion Separation

Novel porous oil-water separation material with super-hydrophobicity and super-oleophilicity prepared from beeswax, lignin, and cotton

Facile Fabrication of the Durable Micro/nano-Superhydrophilic/superoleophobic Surface Through One-Step Spraying for Efficient Oil–water Separation

Wood sponge with photothermal, magnetically driven, and superhydrophobic characteristics for high-viscosity oil–water separation

Facile preparation of superhydrophobic melamine foam via one-pot emulsion polymerization for efficient oil/water separation