Abstract:As the amount of oily wastewater discharged from industrial and domestic sources increases, materials used for oil/water separation have received widespread research attention in recent years. However, many reported separation materials with special wetting properties require complex and environmentally unfriendly preparation processes. Therefore, green and efficient materials for oily wastewater and emulsion separation are urgently needed. In this paper, inspired by the scrobiculate and honeycomb-shaped porous structure of natural balsa wood, functionalized wood was designed as an oil/water separation and emulsion purification material by delignification and a simple surface modification process. A deep eutectic solvent (DES) was used to remove the lignin and hemicellulose components. Sodium carboxymethyl cellulose (CMC) and chitosan quaternary ammonium salt (CQA) were used to functionalize and obtain the superhydrophilic/underwater superoleophobic wood material. The water contact angle of the functionalized wood in air reached 0°, while the underwater contact angles for different kinds of oil were greater than 150°. Various oils were effectively separated with a high separation efficiency (> 99.2%). Moreover, the separation efficiency of kerosene from water still reached 99.5% after 30 separation test cycles. After long-term immersion in different pH and salt solutions, the separation efficiency for a kerosene/water mixture was still greater than 99%. Rapid and continuous oil/water separation was achieved conveniently. More importantly, the selective wetting properties and complex porous structure of the functionalized wood enabled the purification of unstable and surfactant-stabilized oil-in-water emulsions with high separation efficiencies. The functionalized wood material also showed promising antibacterial properties, with a good inhibitory effect on the growth of both Gram-positive S.aureus and Gram-negative E.coli . This will effectively prevent contamination and the decrease in separation efficiency caused by mold on the surface. Therefore, this green, efficient, easily prepared, and durable functionalized wood shows excellent potential for application as a separation material for oily wastewater.

A Hydrogel‐coated Wood Membrane with Intelligent Oil Pollution Detection for Emulsion Separation

Superhydrophilic/underwater Superoleophobic Oil-in-water Emulsion Separation Membrane Modified by the Co-Deposition of Polydopamine and Chitosan-Tripolyphosphate Nanoparticles

A Degradable Super-Hydrophilic/Underwater Super-Oleophobic Membrane Prepared by a Green Modification Method for Efficient Oil-in-Water Emulsion Separation

Polydopamine-CaCO3 Modified Superhydrophilic Nanocomposite Membrane Used for Highly Efficient Separation of Oil-in-water Emulsions

Highly Biocompatible, Underwater Superhydrophilic and Multifunctional Biopolymer Membrane for Efficient Oil–Water Separation and Aqueous Pollutant Removal

Durable, flexible, and super‐hydrophobic wood membrane with nanopore by molecular cross‐linking for efficient separation of stabilized water/oil emulsions

A 3D smart wood membrane with high flux and efficiency for separation of stabilized oil/water emulsions

Effective and low fouling oil/water separation by a novel hollow fiber membrane with both hydrophilic and oleophobic surface properties

Easy preparation of wood-base membrane with fouling resistance in complex environments for efficient oil–water emulsion separation

Natural polyelectrolyte-functionalized superhydrophilic and antibacterial wood for efficient oil/water separation

Fabrication of Ph-Sensitive Superhydrophilic/Underwater Superoleophobic Poly(vinylidene Fluoride)-Graft-(sio2 Nanoparticles and PAMAM Dendrimers) Membranes for Oil-Water Separation.

Effective separation of water-in-oil emulsions using an under-medium superlyophilic membrane with hierarchical pores

Wood-Nanotechnology-Based Membrane for the Efficient Purification of Oil-in-Water Emulsions

A wood-based MOF membrane with high flux and efficiency for oil-in-water emulsions separation

Facile preparation of durable superhydrophobic DTMS@HKUST-1 wood membrane for continuous oil-water separation in harsh conditions

Construction of superhydrophobic PDMS@MOF-199/wood sponge hybrid membrane for ultrahigh-flux gravitational oil/water separation

Wood Sponge Reinforced with Polyvinyl Alcohol for Sustainable Oil–Water Separation

Superhydrophobic wood sponge with intelligent pH responsiveness for efficient and continuous oil-water separation

Polyhydroxy phenolic resin coated polyetherimide membrane with biomimetic super-hydrophily for high-efficient oil–water separation

Hierarchically superhydrophilic poly(vinylidene fluoride) membrane with self-cleaning fabricated by surface mineralization for stable separation of oily wastewater

Green multifunctional PVA composite hydrogel-membrane for the efficient purification of emulsified oil wastewater containing Pb2+ ions