Abstract:To develop in-depth understanding of metallurgical phenomena for completeness, mechanical heterogeneity is kinetically and thermodynamically explained by thorough microstructure characterization of engineering materials, e.g. polycrystalline nickel-based superalloy, for alleviation of weldability-related problems during laser-induced keyhole fabrication. Because of nonequilibrium solidification behavior inside weld pool, finer γ phase dendrite substructure is confined to partition-resistant keyhole bottom part, coarser dendrite is crystallography-independently circumscribed at partition-vulnerable neck transition region of full penetration weld, and thus microstructure is lack of homogeneity. Abundance of segregation-driven eutectic phase or intermetallic phase in the interdendrite area throughout weld is essentially attributable to nonequilibrium solidification conditions, and morphologically increases susceptibility to mechanical properties deterioration. As a result of γ phase instability, Niobium-aided Laves/γ eutectic reaction in the vicinity of dendrite interstices at terminal stage of solidification contributes to severe dendrite boundaries brittleness, impairs mechanical properties, which is consistent with metallography and fractography results, and is more deleterious to weldability, since solute redistribution and supersaturation adversely exacerbate segregation behavior in the residual interdendrite liquid, especially asymmetric weld pool shape. There is inverse parabolic relationship between secondary dendrite arm spacing and solute partition coefficient, when location varies from nail-shaped weld upper site to bottom site. Chemical, microstructural and mechanical heterogeneities are more geometrically favorable in the curvature-related neck transition region. In addition, the mechanism of thermal, metallurgical and mechanical inhomogeneities, which are attributed to asymmetric weld pool shape, is consequently proposed. Untoward metallurgical phenomena, such as microstructure heterogeneity and brittle Niobium-rich Laves/γ eutectic phases mitigate strength, ductility and toughness of weld. In order to macroscopically and microscopically satisfy superior mechanical properties requirement, chemistry and microstructure of high quality weld are metallurgically controlled. Fruitful metallurgical information and mechanical data further support the reasonable explanations. It is imperative to progressively advance welding metallurgy, weldability and fabricability of intricate shape for welding defects minimization, suppress segregation and further develop mechanical properties through viable design and control of laser processing, simultaneously.

Unveiling the Strengthening Mechanism of Laser Welded Fusion Zone of Dissimilar Ni-based Superalloys

Unravelling Asymmetrical Microstructure Evolution and Tensile Fracture Mechanism in Laser Welding of Dissimilar 2219/2195 Aluminum Alloys

Microstructural Inhomogeneity in the Fusion Zone of Laser Welds

Thermal, Metallurgical and Mechanical Determinants of Laminar Nickel/Aluminum Dissimilar Alloys during Laser-material Interaction Part I: Nickel-based Superalloy

Experiments and modeling of microstructural and mechanical behaviors of laser-welded Ni-based superalloy at high temperatures

Diffusion-limited Nonequilibrium Phase Transformation of Nickel/Aluminum Dissimilar Materials during Laser Welding Part I: Precipitation-strengthened Polycrystalline Nickel-based Superalloy

Hierarchical Architecture and Mechanical Behavior of K418 Ni-based Superalloys Manufactured by Laser Powder Bed Fusion

The Control of Fully Equiaxed Microstructure in Laser Welding Al-Mg-Er-Zr Alloy

Microstructure and Mechanical Properties of Laser Fusion Welded Al/steel Joints Using a Zn-based Filler Wire

Strengthening mechanism of a Ni-based superalloy prepared by laser powder bed fusion: The role of cellular structure

On the heterogeneous microstructure and strengthening mechanisms in a laser welding AZ80 magnesium alloy

Improving Fusion Zone Microstructure Inhomogeneity in Dissimilar-Metal Welding by Laser Welding with Oscillation

Solidification microstructures and softening behavior of laser welded 6082-A356 aluminum alloy dissimilar butt joints

The Defects and Microstructure in the Fusion Zone of Multipass Laser Welded Joints with Inconel 52m Filler Wire for Nuclear Power Plants

New Ni-based superalloys designed for laser additive manufacturing

Strengthening Mechanisms of Combined Alloying with Carbon and Titanium on Laser Beam Welded Joints of Molybdenum Alloy

Interfacial microstructure evolution and mechanical properties in laser welded Invar alloy/TC4 dissimilar joints

Microstructure evolution and fracture behavior of 2060 Al Li alloy by laser welding with TiC nanoparticle-reinforced filling wire

Microstructure Evolution and Fracture Behavior of 2060 AlLi Alloy by Laser Welding with TiC Nanoparticle-Reinforced Filling Wire

In-situ investigation of microstructure-dependent deformation behavior of an electron-beam welded Ni Co based superalloy

Microstructure and Tensile Behavior of Laser Arc Hybrid Welded Dissimilar Al and Ti Alloys