Abstract:This study presents a one-dimensional, non-isothermal, steady-state model to analyze performance of an anode-supported solid oxide fuel cell (SOFC). The modeling domain encompasses components including a NiO-YSZ support and functional layer forming the anode, a YSZ electrolyte, a GDC interlayer, as well as LSCF+GDC and LSCF constituting the cathode. The model distinguishes different types of electrode polarization resistances using experimental impedance data at various temperatures under open circuit voltage (OCV), employing a detailed equivalent circuit model to determine the temperature and partial pressure dependencies of electrode exchange current densities. Moreover, this approach serves as an efficient method for estimating the conductivity of both the anode and cathode. As a result, activation energies and ohmic overpotentials are derived, considering microstructural and geometrical aspects, which allows for accurate quantification of the ohmic resistance associated with ionic conduction. The model incorporates coupled multi-physics elements, such as mass and charge transport, electrochemical reactions, and heat transfer. A notable feature of the model is its consideration of reaction zone layers near the electrolyte, where electrochemical reactions generate electrons, oxide ions, and water vapor. Enhancing prediction accuracy, the model applies multilayer discretization within the electrode and electrolyte to reflect actual material properties and localized conditions more accurately. The model predicts the performance of a single-cell SOFC using pure hydrogen at the anode and varying oxygen concentrations (100%, 50%, 20%, and 10%) at different operating temperatures (700°C, 660°C, 620°C, and 580°C) and design conditions. Simulated results are compared with experimental data, and the impact of various operating and design parameters on SOFC performance is examined. Findings indicate that kinetic and concentration overpotentials in an anode-supported SOFC are lower than ohmic overpotentials, even at higher current densities. Furthermore, ohmic overpotential is identified as the primary contributor to total cell potential loss, highlighting the need for its minimization to improve cell performance.

EFFECT ANALYSIS OF VARIOUS GRADIENT PARTICLE SIZE DISTRIBUTION ON ELECTRICAL PERFORMANCE OF ANODE-SUPPORTED SOFCS WITH GRADIENT ANODE

Numerical Modeling and Current Collection Designs for Flat-Chip Solid Oxide Fuel Cell

Optimizing fuel transport and distribution in gradient channel anode of solid oxide fuel cell

Optimization of SOFC Anode Microstructure for Performance and Highly Scalable Cells Through Graded Porosity

Comparison and optimization of electrochemical and thermal performances of SOFC with different configurations of a metal foam flow field

Effect of Cathode Fabrication Method on Characteristics of Anode-Supported Tubular Solid Oxide Fuel Cells

Characteristic simulation with various anode support thicknesses of membrane electrode assembly in SOFC

An Analytical Model for an Anode-Supported Solid Oxide Fuel Cell

Effects of gradient porosity in the metal foam flow field on the performance of a proton exchange membrane fuel cell

Modeling Analysis of SOFC Supported on Anode Employing Straight Channel Fabricated by Phase-Inversion Method

Reconstruction and optimization of LSCF cathode microstructure based on Kinetic Monte Carlo method and Lattice Boltzmann method

Toward a fundamental understanding of the heterogeneous multiphysics behaviors of silicon monoxide/graphite composite anodes

Modeling and evaluation of sintered microstructure and its properties for rSOFC fuel electrodes by coarse-grained molecular dynamics

Solid Oxide Fuel Cell Porous Cathode Micro Modeling and Performance Prediction

Performance and Optimization of Ni/3 Mol% Y2O3-ZrO2 Anode Supported SOFC

Solid Oxide Fuel Cell Anode Porosity and Tortuosity Effect on the Exergy Efficiency

The physical properties and effects of sintering conditions on rSOFC fuel electrodes evaluated by molecular dynamics simulation

Effect of the Reactant Transportation on Performance of a Planar Solid Oxide Fuel Cell

Improvement of output performance of solid oxide fuel cell by optimizing the active anode functional layer

Study of the Influences of Fuel Utilization on Efficiency and Anode Safety at Different Fuel Flow Rates for Industrial-Size Solid Oxide Fuel Cell

Effects of cathode thickness and microstructural properties on the performance of protonic ceramic fuel cell (PCFC): A 3D modelling study