SmartHeating: On the Performance and Lifetime Improvement of Self-Healing SSDs

Jinhua Cui,Junwei Liu,Jianhang Huang,Laurence T. Yang

DOI: https://doi.org/10.1109/TCAD.2020.2990896

IF: 2.9

2021-01-01

IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems

Abstract:In NAND flash memory-based solid-state drives (SSDs), during the idle time between the consecutive program/erase cycles (dwell time), the dielectric damage of flash cell can be partially repaired, also known as the self-recovery effect. As the effectiveness of the self-recovery effect can be improved under high temperature, self-healing SSDs are proven feasible to extend the flash endurance significantly. However, current self-healing SSDs perform the heating operations on all the worn-out blocks without considering the data retention requirement, and measures the lifetime of flash memory based on the worst-case self-recovery effect, leading to some unnecessary heating operations and the degraded performance. We propose SmartHeating, a smart heating scheme that exploits the dwell time variation and the write hotness variation to improve the I/O performance and the lifetime of self-healing SSDs. SmartHeating tracks the dwell time of all worn-out flash blocks, predicts their self-recovery effect and reliability, and avoids performing heating operations on the worn-out flash blocks that still have strong flash reliability. In addition, by exploiting the data hotness variation, SmartHeating only heats the worn-out flash blocks that store write-cold data, while allocating write-hot data to a small portion of worn-out flash blocks with negligible refresh overhead. The experimental results show that SmartHeating reduces the number of heating operations by 12.5% on average, boosts I/O performance of flash storage systems by 21.0%, and improves the lifetime of flash memory by 1.20x compared with conventional heating scheme.