The critical limits of thermophysical properties defining the optimum heat transfer coefficient in case of spray quenching from high temperature
Kollati Prudhvi Ravikumar,Abanti Sahoo,Soumya Sanjeeb Mohapatra
DOI: https://doi.org/10.1007/s10973-023-12245-7
IF: 4.755
2023-05-28
Journal of Thermal Analysis and Calorimetry
Abstract:By altering the thermophysical properties of the coolant in the favourable direction of heat transfer, augmentation is achieved in the case of spray cooling in transition boiling. The above-stated thermophysical properties were varied, and the critical limit of maximum heat transfer was determined. In the current work, using various additives, the above stated is achieved, and the maximum enhancement limit is determined. Initially, dropwise experiments are conducted in a transition boiling temperature regime to determine the heat transfer coefficient variation mechanism. Thereafter, spray cooling experiments were performed. In the current work, three independent variables, which are part of Weber, Reynold and Prandtl numbers, are formed: ρ/µ, ρ/σ and cpµ/k. The basis of selection was to identify only the role of thermophysical properties of the heat transfer coefficient. From the variation in HTC with ρ/σ, it is concluded that HTC shows a decreasing trend in the ρ/σ range of 10.2–14, and then again, HTC increases with the rising value of ρ/σ. Finally, after ρ/σ = 20 s2m−3, the HTC does not change significantly, or it can be said that it reaches the plateau region. To check the suitability of the used coolants in fast quenching operations, the cooling parameters such as AHF, CHF and IHFs are compared. From this, it is concluded that the maximum CHF, AHF and IHF are achieved in the case of benzene (1600 ppm)-added water. The analysis of the developed correlations using various techniques shows that the design expert model produces the minimum error.
chemistry, physical, analytical,thermodynamics