Abstract:Rationale: The feasibility of using paper spray ionization as an ambient ionization method for inorganic analysis was investigated. Methods: Aqueous solutions were spotted onto paper triangles and high voltage was applied to induce electrospray. In-source collision-induced dissociation assisted in breaking up clusters to produce mass spectra dominated by atomic ions and their corresponding oxides and hydroxides and high-resolution exact mass measurements were used to identify atomic ions in the presence of organic interferences. Results: A feasibility test with a standard inductively coupled plasma mass spectrometry (ICP-MS) test mixture demonstrated detection of 21 of 23 elements as M(+•) or [M + OH](+). The two undetected elements (boron and lithium) were below the minimum detectable m/z setting for the time-of-flight mass spectrometer used for these experiments. Untreated filter paper showed residual contamination from group I and group II elements. Excellent linearity was observed over the concentration range 0.1-1000 ppm for nickel(II) nitrate solutions containing 10 ppm cobalt(II) nitrate as internal standard. The method was applied to the analysis of lead-free solder, a bismuth subsalicylate tablet, permanent magnet materials and lead chromate pigment in a three-cent US postage stamp issued in 1948. Conclusions: Paper spray ionization was successfully applied to qualitative inorganic analysis. Quantitative analysis was shown to be possible with the use of internal standards. Initial detection limits were much higher than for comparable inductively coupled plasma and glow discharge methods, ranging from the high parts-per-billion range to the low parts-per-million range. The detection limits for some elements were limited at low levels by the presence of interferences that were not separated by the resolving power of the mass spectrometer. Despite these limitations, the simplicity and potential portability of paper spray may find some applications for elemental analysis.

Electro-Filtering Spray Ionization Source for Soil Analysis

A Simplified Electrospray Ionization Source Based On Electrostatic Field Induction For Mass Spectrometric Analysis Of Droplet Samples

An Electrospray Chemical Ionization Source for Real-Time Measurement of Atmospheric Organic and Inorganic Vapors

Induced Self-aspiration Electrospray Ionization Mass Spectrometry for Flexible Sampling and Analysis.

Characterization and application of a self-aspirating electrospray source with pneumatic-assisted ionization

Surface charge-induced electrospray for high-throughput analysis of complex samples and electrochemical reaction intermediates using mass spectrometry

Paper Spray Ionization Devices for Direct, Biomedical Analysis Using Mass Spectrometry

Sampling and Analyte Enrichment Strategies for Ambient Mass Spectrometry

Pulsed Electrospray for Mass Spectrometry.

Electrostatic-Spray Ionization Mass Spectrometry

Electroless Ionization Mass Spectrometry Using a Compact Electrokinetic Ionization Source

A 3D-Printed Sub-Atmospheric Pressure Electrospray Ionization Source for Robust, Facile, and Flexible Mass Spectrometry Analysis.

Electrostatic Spray Ionization Mass Spectrometry Imaging.

Ion transfer between ion source and mass spectrometer inlet: electro-hydrodynamic simulation and experimental validation

On-Demand Portable Paper-Based Electrospray Ionization Mass Spectrometry for High-Sensitivity Analysis of Complex Samples

Developing a Vacuum Electrospray Source to Implement Efficient Atmospheric Sampling for Miniature Ion Trap Mass Spectrometer

Development, Characterization, and Application of Paper Spray Ionization.

Desorption electrospray ionization and other ambient ionization methods: current progress and preview

Exploiting the Native Inspiratory Ability of a Mass Spectrometer to Improve Analysis Efficiency

Paper spray ionization for ambient inorganic analysis

Ambient ion focusing for paper spray ionisation