Abstract:Background: Woody biomass is highly recalcitrant to enzymatic sugar release and often requires significant size reduction and severe pretreatments to achieve economically viable sugar yields in biological production of sustainable fuels and chemicals. However, because mechanical size reduction of woody biomass can consume significant amounts of energy, it is desirable to minimize size reduction and instead pretreat larger wood chips prior to biological conversion. To date, however, most laboratory research has been performed on materials that are significantly smaller than applicable in a commercial setting. As a result, there is a limited understanding of the effects that larger biomass particle size has on the effectiveness of steam explosion pretreatment and subsequent enzymatic hydrolysis of wood chips. Results: To address these concerns, novel downscaled analysis and high throughput pretreatment and hydrolysis (HTPH) were applied to examine whether differences exist in the composition and digestibility within a single pretreated wood chip due to heterogeneous pretreatment across its thickness. Heat transfer modeling, Simons' stain testing, magnetic resonance imaging (MRI), and scanning electron microscopy (SEM) were applied to probe the effects of pretreatment within and between pretreated wood samples to shed light on potential causes of variation, pointing to enzyme accessibility (i.e., pore size) distribution being a key factor dictating enzyme digestibility in these samples. Application of these techniques demonstrated that the effectiveness of pretreatment of Populus tremuloides can vary substantially over the chip thickness at short pretreatment times, resulting in spatial digestibility effects and overall lower sugar yields in subsequent enzymatic hydrolysis. Conclusions: These results indicate that rapid decompression pretreatments (e.g., steam explosion) that specifically alter accessibility at lower temperature conditions are well suited for larger wood chips due to the non-uniformity in temperature and digestibility profiles that can result from high temperature and short pretreatment times. Furthermore, this study also demonstrated that wood chips were hydrated primarily through the natural pore structure during pretreatment, suggesting that preserving the natural grain and transport systems in wood during storage and chipping processes could likely promote pretreatment efficacy and uniformity.

Assessing the Specific Energy Consumption and Physical Properties of Comminuted Douglas-Fir Chips for Bioconversion

ZnCl2 Pretreatment of Bamboo Chips to Produce Chemi-Thermomechanical Pulp: Saving Refining Energy and Improving Pulp Properties

A Techno-Economic Analysis Comparing a Hammermill and a Rotary Shear System to Process Woody Biomass for Biofuel Production

Characterization of biomass comminution for entrained-flow gasification

Particle size and shape effect of Crumbler® rotary shear-milled granular woody biomass on the performance of Acrison® screw feeder: A computational and experimental investigation

High-strain Rate Compressive Behavior of Douglas Fir and Glubam

How chip size impacts steam pretreatment effectiveness for biological conversion of poplar wood into fermentable sugars

Micromorphological changes and mechanism associated with wet ball milling of Pinus radiata substrate and consequences for saccharification at low enzyme loading

Effects of the Moisture Content on the Flow Behavior of Milled Woody Biomass

Robust optimization of energy consumption during mechanical processing of wood

Investigating the effect of process variables for ball milling of wood chips: energy demand and particle size

Friction and Shear Properties of Pine Biomass and Pellets

Fractionation of wood due to industrial chipping: effects and potential for Kraft pulping of European spruce

Wood Chips Components Separation with a New Wet-Milling Process Compared to Chemical Depolymerization: A Technical, Economic, and Environmental Comparison

Quality of eucalyptus wood chips for bioenergy as a function of drying time and horizontal chipper settings

A comprehensive review on wood chip moisture content assessment and prediction

Pelleting of Pine and Switchgrass Blends: Effect of Process Variables and Blend Ratio on the Pellet Quality and Energy Consumption

Micromorphology and native extractive behaviour of wood powder

Prediction of Storage Conditions to Increase the Bioenergy Efficiency of Giant Miscanthus Pellets Produced through On-Site Integrated Pretreatment Machines

Briquetting of Poplar Wood from Short Rotation Coppice—The Effects of Moisture Content and Hammer Mill Screen Size

Cutting power and surface quality in sawing kiln-dried, green, and frozen hem-fir wood