Abstract:Few studies/bodies of data are available in the open literature on the topic of mechanical material characterisation and structural performance for direct/inline compounded long fibre thermoplastic (LFT) automotive parts, particularly incorporating carbon fibre. Therefore, this study aimed to comprehensively document the mechanical properties of a seatback for a lightweight automotive seating design, compression moulded from carbon fibre/polyamide 66 on a Dieffenbacher LFT-D manufacturing line. The methodology consisted of extracting and characterising mechanical behaviour of tensile specimens from full seatback components and completing quasi-static and low velocity impact loading on these seatbacks. Both longitudinal and transverse charge placements within the compression mould were considered. Main findings from the tensile tests noted a dependency of the mechanical properties based upon the location from which specimens were extracted; from the charge region, the elastic moduli in the 0° and 90° directions were similar (0°: 14.0GPa & 90° 15.9GPa with coefficients of variation (CoV) of 56% and 36%, respectively) or, for the case of specimens extracted from the flow region, exhibited significant anisotropy (elastic moduli in the 0° direction 9.79GPa and 90° direction 21.6GPa, with CoV's of 16% and 23%). In terms of anisotropy of the full seatback component, under low velocity impact loading a local force maxima was observed for seatbacks produced with a longitudinal charge orientation at deflections of approximately 15 to 20mm. No local maxima were consistently observed for transverse charge seatbacks. In terms of rate effects, stiffness was 550% higher for low velocity impact with respect to quasi-static loading. Digital image correlation identified a greater level of deformation, particularly away from the indenter, for quasi-static loading. Catastrophic failure occurred at larger deflections for low velocity impact (36% increase for longitudinal charge placement, 24% for transverse). The results of this investigation have practical applications for engineers in industry considering direct/inline compounded carbon fibre LFT materials in cases where quasi-static and dynamic loading will be present, for example, automotive chassis/body structural components.

Coefficient of Friction Between Pant Fabrics and Seat Covers: An In-Vivo Experimental Study

Determination of the Coefficients of Friction Between Pant Fabrics and Seat Covers

A parametric investigation on seat/occupant contact forces and their relationship with initially perceived discomfort using a configurable seat

Effects of loading processes on contact forces when simulating static seating with a finite element human body model

Effect of prophylactic dressings to reduce pressure injuries: a polymer-based skin model

Hygro-thermo-mechanical performance of wheelchair cushion technologies in the prevention of pressure ulcers and moisture-associated skin damages

How does moderate upper limb activity modify sitting forces for able-bodied persons and wheelchair users?

An apparatus to quantify anteroposterior and mediolateral shear reduction in shoe insoles.

The relationship between torso inclination and the shearing force of the buttocks while seated in a wheelchair: Preliminary research in non-disabled individuals

Exploring the mechanical potential of 3D woven solid structures for car seat cover

A Critical Study of Cottenden et al.'s An Analytical Model of the Motion of a Conformable Sheet Over a General Convex Surface in the Presence of Frictional Coupling

Sensitivity of the human back and buttocks: The missing link in comfort seat design

Effects of seat parameters and sitters' anthropometric dimensions on seat profile and optimal compressed seat pan surface

Smart seat cushion feasibility pilot study: automated interface pressure modulation of individuals with spinal cord Injury

Experimental characterisation of the mechanical properties of a carbon fibre/PA66 LFT automotive seatback under quasi-static and impact loading

Experimental analysis on friction materials for supplemental damping devices

Reducing Friction on Skin at Risk: The Use of 3M™ Cavilon™ No Sting Barrier Film

Shear stress measured on beds and wheelchairs

Human-Centered Design and Manufacturing of a Pressure-Profile-Based Pad for Better Car Seat Comfort

Study of friction in the "textile-human" system for the ergonomic design of sustainable functional clothing

Preparation and Characterization of Knitting Fabrics with Good Tactile Comfortability for Automotive Seat Application