An Experimental Investigation into Ammonia Oxidation and NOx Emission in a Packed-Bed of Quartz Particles
Samuel Ronald Holden,Zhezi Zhang,Junzhi Wu,Yuanyuan Zhang,Fangqin Cheng,Dongke Zhang
DOI: https://doi.org/10.1080/00102202.2024.2421375
IF: 1.9
2024-11-04
Combustion Science and Technology
Abstract:The effect of temperature, initial NH 3 concentration, equivalence ratio, and flowrate on the characteristics of ammonia (NH 3 ) oxidation and associated NOx formation in a fixed-bed reactor packed with quartz particles has been systematically investigated with a stream of NH 3 and O 2 in He over a range of furnace set temperatures (900 K – 1400 K), initial NH 3 concentrations (2% – 10%), equivalence ratios (ɸ = 0.8, 0.9, 1.0, 1.1), and total flowrates (145 mL/min, 289 mL/min, and 434 mL/min). Benchmark flow reactor experiments, without the quartz particles in the reactor under otherwise similar conditions, were previously performed and served as a reference case for this work. Compared to the flow reactor results, the packed-bed data indicated a lower reaction onset temperature and more gradual NH 3 conversion across the temperature range. Both packed-bed and flow reactor experiments indicated that decreasing flowrate, thus increasing residence time, resulted in greater NH 3 conversion. NH 3 conversion in the fixed-bed reactor was similar for all equivalence ratios at temperatures ≤1200 K, above which NH 3 conversion increased with decreasing equivalence ratio, a trend broadly aligned with previous flow reactor experiments. For all conditions examined, NO was the major NOx component and NO 2 was insignificant. Across the range of equivalence ratios, NO emission was low, yet noticeable, from 900 K – 1100 K, before spiking at 1200 K. Above 1200 K, NO emissions decreased before drastically increasing again at 1400 K under fuel-lean conditions. At temperatures ≤1300 K, NO was generally found to decrease with decreasing equivalence ratio, while at 1400 K, NO increased with decreasing equivalence ratio. NO emissions were significantly lower in the packed-bed compared to the flow reactor scenario at temperatures ≥1300 K.
energy & fuels,engineering, chemical,thermodynamics, multidisciplinary