Abstract:Fast and reliable black start plays a key role in improving the ability of the power system to resist the risk of large-scale blackouts. For a black start with high voltage and long-distance transmission lines, it is much easier to cause phenomena such as self-excitation and power frequency/operating overvoltage, which may lead to black start failure and impact the reliability of the system's restoration. Meanwhile, the long time needed to crank up the non-black start units will impact the speed of the restoration. This paper addresses the advantages of using a thermal power unit with a fast cut back (FCB) function as a black start unit, and studies the transient process of the FCB unit during the restoration. Firstly, key problems in the power system black start process are analyzed and a practical engineering criterion of self-excitation is proposed. Secondly, the dynamic model of the FCB unit is presented. Thirdly, the field test of the FCB unit load rejection and black start is introduced, which is the first successful field test of black start with 500 kV long-distance lines in China Southern Power Grid (CSG). Finally, the transient process of this test is simulated using the PSCAD/EMTDC software, and the simulation results accord well with the field test results, which verifies the correctness of the FCB model and the self-excitation engineering criterion proposed.

HVDC Startup Strategy in AC/DC Hybrid System Black Start Process

Black Start With Dfig-Based Wind Turbines Using Improved Virtual Synchronous Control

A Recovery Method for HVDC Systems Following AC System Faults

Analysis On Hvdc Start-Up In System Black-Start

Frequency Regulation Strategy Based on Variable‐parameter Frequency Limit Control During Black Start

Startup Procedures for the VSC-HVDC System

Frequency Regulation Strategy for AC–DC System During Black Start

Variable Parameter FLC Scheme of HVDC During Black Start-up

Black-start Strategy of the HVDC System Based on Series-Connected Hybrid Converter for Offshore Wind Farms

A Study on Using VSC-HVDC for Fast Restoring Loads after System Contingencies

Research on technical requirements of line-commutated converter-based high-voltage direct current participating in receiving end AC system's black start

A novel method of restoration path optimization for the AC-DC bulk power grid after a major blackout

Start/Stop Control of Modular Multilevel Converter Based HVDC Transmission System

Design and research of typical black-start cases with CCHP systems as start units

Power system black-start strategy considering recovery time model

AC- and DC-side start-up strategies for half-/full-bridge hybrid modular multilevel converter

Black-start Control for EV's Intelligent Integrated Station

Operating Characteristic Analysis of Multi-terminal Hybrid HVDC Transmission System with Different Control Strategies

Fast Cut Back Thermal Power Plant Load Rejection And Black Start Field Test Analysis

LCC-HVDC System Start-Up by STATCOM with a Very Weak Receiving AC System

Research on Optimization of Generators Starting Sequence Including DC Converter Station