Abstract:East China Power Grid has the largest installed generation capacity among the regional power grids in China. Most of the installed generation capacities are in thermal power. With the building of very large hydro power plants in West China, an UHVDC system interconnecting with the area grids between East and West China is under construction and will be in operation in 2012. This UHVDC link with a 6.4 GW rated capacity will transmit the power generated from large hydro power plants to East China Grid over a long distance about 2000 km. With reference to the reliability issue for such an UHVDC connection with East China Grid, this paper proposes a reliability evaluation method and procedure for the large scale generation and transmission system with an UHVDC interconnection based on Monte Carlo simulation. The key techniques for implementation of reliability evaluation are introduced: 1) For the system state correction step in the procedure of reliability evaluation, sensitivity analysis method is hard to ensure the optimality of the state correction scheme. Although linear programming method is more rigorous, the scale of the problem is very large for a large scale composite generation and transmission system like the East China Grid. A new linear programming model is built to reduce the scale of the problem. The results of sensitivity analysis are utilized in this new model. 2) To accelerate the convergence speed of Monte Carlo Simulation, an importance sampling technique is designed. Different from commonly used importance sampling method, the multipliers are set as different values for different kind of components in the system according to their contributions to failure events. 3) East China Power Grid is a multi-infeed AC/DC power system. In order to highlight impact of the new UHVDC connection on power supply reliability of East China Power grid, the reliability indices of the existing HVDC systems are not evaluated in this paper, instead, they are considered as multi-state power sources to the East China Power Grid. The state table of the UHVDC system is specially built. 4) DC power flow is calculated in the procedure of reliability evaluation. But for large scale power systems, the active power loss may be larger than the capacity of several generating units. Neglecting loss will lead to some error to the results of reliability evaluation. A method is proposed to consider power loss in calculating DC power flows. A computation program is developed using C++ language. The case studies have been carried out on the planned 2012 East China power system with the UHVDC system connected. The objective of the reliability assessment has been focused on the system operation condition of the expected summer peak-load operation mode of East China Power Grid in 2012. Study results show the effectiveness of the proposed techniques. Moreover, sensitivity analyses are also carried out.

Nodal Reliability Evaluation for a VSC-MTDC-Based Hybrid AC/DC Power System

Optimal Adjustment of Power Network Structure by Considering Static Voltage Stability and Short-Circuit Current Level of Multi-Infeed DC Systems

Reliability Evaluation Method of AC/DC Hybrid Distribution Network Considering Voltage Source Converter Restoration Capability and Network Reconfiguration

Reliability Evaluation Of Hybrid Ac/Dc Power Systems

A Semi-Markov Stochastic Model for Operational Reliability Assessment of Hybrid AC and LCC-VSC-based DC System with Remote Wind Farms

Reliability Equivalence to Symmetrical UHVDC Transmission Systems Considering Redundant Structure Configuration

Reliability Assessment of Interconnected Power Systems with HVDC Links Considering Frequency Regulation Process

Stability Analysis and Impedance Reshaping Method for DC Resonance in VSCs-based Power System

The Unified Model and Optimal Operation Analysis for A Modular Multilevel Converter

Study on Hybrid HVDC Transmission Technology Used for Upgrading of Conventional HVDC Transmission System

Control Strategy Research Of Vsc Based Multiterminal Hvdc System

Reliability Assessment of Ac Distribution Network with Multi-Terminal Dc Interconnection

Transient Stability Emergency Control for AC/DC Grids Considering Successive Commutation Failures

Optimal Operation for Hybrid AC and DC Systems Considering Branch Switching and VSC Control

Reliability calculation model of converter station for MMC-HVDC Power Transmission system and its application

Short-Term Voltage Stability-Constrained Unit Commitment for Receiving-End Grid with Multi-Infeed HVDCs

Reliability-Centered Maintenance for Modular Multilevel Converter in HVDC Transmission Application

Reliability Evaluation Method for AC/DC Hybrid Distribution Power Network Considering Cascaded Multiport Power Electronic Transformer

Reliability analysis of bulk power system with an UHVDC connection

Control of multi-terminal VSC-HVDC system based on V-I characteristics