Abstract:Continuous emission of carbon dioxide gas (CO2) poses a significant effect on ambient environment, crop production, and human health, necessitating further improvement of CO2 monitoring especially at low concentrations. To overcome the obstacles of elevated operation temperatures and faint response encountered by traditional CO2-sensitive materials such as metal oxides and perovskites, a nitrogen-doped MXene Ti3C2Tx (N-MXene)/polyethyleneimine (PEI) composite film decorated with reduced graphene oxide (rGO) nanosheets was initiatively leveraged in this work to detect 8–3000 ppm CO2 gas. Through subtle optimization in the aspects of componential constitutions, operation temperatures, PEI loading amounts, and relative humidity (RH), the ternary sensors with a PEI concentration of 0.01 mg/mL exhibited a reversible and superior performance over other counterparts under 62% RH at room temperature (20 °C). Apart from the inspiring detection limit of 8 ppm, favorable selectivity, repeatability, and long-term stability were demonstrated as well. During the humid CO2 sensing of the composites, few rGO nanosheets acted as an excellent conduction platform to transfer and collect charge carriers. Layered N-MXene offered more active sites for coadsorption of both CO2 and water, thereby facilitating the water-involving reactions. Rich amino groups of the PEI polymer were beneficial to bind CO2 molecules and thus induce appreciable density variation of charge carriers via proton-conduction behavior. This work initiatively offers an alternative ion-conduction strategy to detect ppm-level CO2 gas by harnessing rGO/N-MXene/PEI composites under a humid atmosphere at room temperature, simultaneously broadening the discrimination range of MXene-related gas sensing.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.analchem.0c03664?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.analchem.0c03664</a>.SEM and elementary distribution of the MXene sample; XPS information of the rGO/N-MXene/PEI sample; time-resolved resistance and response of the pure PEI sensor; and sensing performance of the ternary sensor at higher CO2 concentration (<a class="ext-link" href="/doi/suppl/10.1021/acs.analchem.0c03664/suppl_file/ac0c03664_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Machine-intelligent Inkjet-Printed Α-Fe2o3/rgo Towards NO2 Quantification in Ambient Humidity

Hollow Cu2O nanospheres loaded with MoS2/reduced graphene oxide nanosheets for ppb-level NO2 detection at room temperature

Sensitive Humidity Sensors Based on Ionically Conductive Metal-Organic Frameworks for Breath Monitoring and Non-Contact Sensing

Hydrophobic MOF/PDMS-Based QCM Sensors for VOCs Identification and Quantitative Detection in High-Humidity Environments

Monodisperse Y-type CoO Hierarchical Nanostructure/reduced Graphene Oxide for Improved NO2 Detection at Room Temperature with Enhanced Moisture Resistance

Three-Dimensional Fe3O4@Reduced Graphene Oxide Heterojunctions for High-Performance Room-Temperature NO2 Sensors

Integration strategies of ternary hierarchical nanocomposite designs with activated ultraviolet lights and surface acoustic waves for enhancing NO 2 sensing at room-temperature

SnO2 Nanoparticles Incorporated CuO Nanopetals on Graphene for High-Performance Room-Temperature NO2 Sensor

A Monolithic Nano-Scale Sensor Architecture with Tuneable Gas Diffusion for Molecular Fingerprinting

MOF/PDMS Hybrid Nanofilm-based QCM for VOC Selective Virtual Sensing in High-Humidity Environments

Edge-enriched MoS2 Nanosheets Modified Porous Nanosheet-Assembled Hierarchical In2O3 Microflowers for Room Temperature Detection of NO2 with Ultrahigh Sensitivity and Selectivity.

Monodisperse Y-type CoO hierarchical nanostructure/reduced graphene oxide for improved NO 2 detection at room temperature with enhanced moisture resistance

Classification and concentration estimation of CO and NO2 mixtures under humidity using neural network-assisted pattern recognition analysis

UV-assisted fluctuation-enhanced gas sensing by ink-printed MoS2 devices

Humidity-Enabled Ionic Conductive Trace Carbon Dioxide Sensing of Nitrogen-Doped Ti 3 C 2 T x MXene/Polyethyleneimine Composite Films Decorated with Reduced Graphene Oxide Nanosheets

Room temperature sensing of volatile organic compounds using hybrid SnO nanoflower and Laser-Induced Graphitic carbon devices

Interface-engineering in MOF-derived In2O3 for highly sensitive and dual-functional gas sensor towards NO2 and triethylamine

In-situ grown hydrated tungsten oxide nanosheets for low temperature ppb-level NO2 detection with alleviated humidity interference

Effect of Humidity on Light-Activated NO and NO2 Gas Sensing by Hybrid Materials

Humidity-enhanced NO$_2$ gas sensing using atomically sharp edges in multilayer MoS$_2$

Humidity-Insensitive NO2 Sensors Based on SnO2/rGO Composites