Abstract:Highly-conductive nanostructures may be dispersed into phase change materials (PCM) to improve their effective thermal conductivity, thus leading to colloidal systems that are referred to as nanostructure-enhanced PCM (NePCM). Results of a theoretical and experimental investigation on freezing of NePCM in comparison to the base PCM are presented. A one-dimensional Stefan model was developed to study the unidirectional freezing of NePCM in a finite slab. Only the thermal energy equation was considered and the presence of static dispersed nanoparticles was modeled using effective media relations. A combination of analytical and integral methods was used to solve this moving boundary problem. The elapsed time to form a given thickness of frozen layer was therefore predicted numerically. A cooled-from-bottom unidirectional freezing experimental setup was designed, constructed, and tested. Thermocouple readings were recorded at several equally spaced locations along the freezing direction in order to monitor the progress of the freezing front. As an example, cyclohexane (C6H12) and copper oxide (CuO) nanoparticles were chosen to prepare the NePCM samples. The effective thermophysical and transport properties of these samples for various particle loadings (0.5/3.8, 1/7.5, and 2/14.7 vol. %/wt. %) were determined using the mixture and Maxwell models. Due to utilization of the Maxwell model for thermal conductivity of both phases, the numerical predictions showed that the freezing time is shortened linearly with increasing particle loading, whereas nonmonotonic expediting was observed experimentally. The maximum expediting was found to be nearly 8.23% for the 0.5 vol. % sample. In the absence of a nanoparticle transport model, the mismatch of the cold plate boundary conditions, lack of accurate thermophysical properties, especially in the solid phase of NePCM samples and precipitation issues with 2 vol. % samples were addressed by improving the experimental setup. Through adopting a copper cold plate, utilizing measured thermal conductivity data for both phases and using 1, 2, and 4 wt. % samples, good agreement between the experimental and numerical results were realized. Specifically, adoption of measured thermal conductivity values for the solid phase in the Stefan model that were originally underestimated proved to be a major cause of harmony between the experiments and predictions. [DOI: 10.1115/1.4006305]

Study on the Supercooling Degree and Nucleation Behavior of Water-Based Graphene Oxide Nanofluids PCM

Non-Isothermal Crystallization of Aqueous Nanofluids with High Aspect-Ratio Carbon Nano-Additives for Cold Thermal Energy Storage

Phase Change Characteristics of Ethylene Glycol Solution-Based Nanofluids for Subzero Thermal Energy Storage

A Theoretical and Experimental Investigation of Unidirectional Freezing of Nanoparticle-Enhanced Phase Change Materials

Effects of Nanoparticles and Sample Containers on Crystallization Supercooling Degree of Nanofluids

Expedited Freezing of Nanoparticle-Enhanced Phase Change Materials (nepcm) Exhibited Through A Simple 1-D Stefan Problem Formulation

Improving the Supercooling Degree of TiO2 Suspensions by Coupling with Zirconium Phosphate Nanoplatelets

Solidification Behavior of Hybrid Tio2 Nanofluids Containing Nanotubes and Nanoplatelets for Cold Thermal Energy Storage

Experimental Verification of Expedited Freezing of Nanoparticle-Enhanced Phase Change Materials (Nepcm)

Effects of Graphite Nanosheet Size on Thermal Storage Property of Composite PCMs

Investigation on thermal energy storage characteristics of form-stable phase change materials supported by graphene aerogel

An Experimental Investigation of Enhanced Thermal Conductivity and Expedited Unidirectional Freezing of Cyclohexane-Based Nanoparticle Suspensions Utilized As Nano-Enhanced Phase Change Materials (Nepcm)

Experimental Study on Reduce Supercooling Degree of Ice Storage Solution Using Nucleation Additive

Supercooling Behaviour and Non-Isothermal Crystallization Processes of Aqueous Suspensions of Carbon Nanotubes

Ultrahigh specific surface area of graphene for eliminating subcooling of water

Effect of different additives on freezing characteristics and stability of GnP-aqueous-based PCM for cold thermal storage

Experimental study on cooling performance of water-based hybrid nanofluid with PCM and graphene nanoparticles

Water - graphene nanoplatelets based thermal energy storage material with nucleating and thickening agents: An investigation on thermal behavior during phase change

Experimental thermal performance of deionized water and iron oxide nanofluid for cold thermal storage

The Preparation of AgI/Au/foam-Cu As a Framework of Composite for Water-Based Cool Storage Phase-Change Material with Low Supercooling

Preparation and thermo-physical properties of stable graphene/water nanofluids for thermal management