Abstract:The MethaneSAT satellite instrument and its aircraft precursor, MethaneAIR, are imaging spectrometers designed to measure methane concentrations with wide spatial coverage, fine spatial resolution, and high precision compared to currently deployed remote sensing instruments. At 12 960 m cruise altitude above ground (13 850 m above sea level), MethaneAIR datasets have a 4.5 km swath gridded to 10 m × 10 m pixels with 17–20 ppb standard deviation on a flat scene. MethaneAIR was deployed in the summer of 2021 in the Permian Basin to test the accuracy of the retrieved methane concentrations and emission rates using the algorithms developed for MethaneSAT. We report here point source emissions obtained during a single-blind volume-controlled release experiment, using two methods. (1) The modified integrated mass enhancement (mIME) method estimates emission rates using the total mass enhancement of methane in an observed plume combined with winds obtained from Weather Research Forecast driven by High-Resolution Rapid Refresh meteorological data in Large Eddy Simulations mode (WRF-LES-HRRR). WRF-LES-HRRR simulates winds in stochastic eddy-scale (100–1000 m) variability, which is particularly important for low-wind conditions and informing the error budget. The mIME can estimate emission rates of plumes of any size that are detectable by MethaneAIR. (2) The divergence integral (DI) method applies Gauss's theorem to estimate the flux divergence fields through a series of closed surfaces enclosing the sources. The set of boxes grows from the upwind side of the plume through the core of each plume and downwind. No selection of inflow concentration, as used in the mIME, is required. The DI approach can efficiently determine fluxes from large sources and clusters of sources but cannot resolve small point emissions. These methods account for the effects of eddy-scale variation in different ways: the DI averages across many eddies, whereas the mIME re-samples many eddies from the LES simulation. The DI directly uses HRRR winds, while mIME uses WRF-LES-HRRR wind products. Emissions estimates from both the mIME and DI methods agreed closely with the single-blind volume-controlled experiments ( N = 21). The York regression between the estimated emissions and the released emissions has a slope of 0.96 [0.84, 1.08], R = 0.83 and N = 21, with 30 % mean percentage error for the whole dataset, which indicates that MethaneAIR can quantify point sources emitting more than 200 kg h −1 for the mIME and 500 kg h −1 for the DI method. The two methods also agreed on methane emission estimates from various uncontrolled sources in the Permian Basin. The experiment thus demonstrates the powerful potential of the MethaneAIR instrument and suggests that the quantification method should be transferable to MethaneSAT if it meets the design specifications.

Methane emissions from a waste treatment site: Numerical analysis of aircraft-based data

Underestimated Methane Emissions from Solid Waste Disposal Sites Reveal Missed Greenhouse Gas Mitigation Opportunities

Investigation of Methane Fluxes from Temporary Cover of Xi’an Jiangcungou Landfill, China

Quantification of methane emissions from waste water treatment plants

Supplementary Material to "locating and Quantifying CH4 Sources Within a Wastewater Treatment Plant Based on Mobile Measurements"

Emission Determination by Three Remote Sensing Methods in Two Release Trials

Methane point source quantification using MethaneAIR: a new airborne imaging spectrometer

Investigating aerial data pre-analysis schemes and site-level methane emission aggregation methods at LNG facilities

Locating and Quantifying Methane Emissions by Inverse Analysis of Path-Integrated Concentration Data Using a Markov-Chain Monte Carlo Approach

Estimation of Waste Water Treatment Plant Methane Emissions: Methodology and Results from a Short Campaign

Investigating Major Sources of Methane Emissions at US Landfills

A new aerial approach for quantifying and attributing methane emissions: implementation and validation

Numerical Analysis of Moisture and Gas Transport in Earthen Final Covers Considering Effects of Vapor and Temperature Gradient

Landfill Emissions of Methane Inferred from Unmanned Aerial Vehicle and Mobile Ground Measurements

Methodology and Uncertainty Analysis of Methane Flux Measurement for Small Sources Based on Unmanned Aerial Vehicles

Using Ground- and Drone-Based Surface Emission Monitoring (SEM) Data to Locate and Infer Landfill Methane Emissions

Quantifying methane emissions from United States landfills

High-resolution Modelling of Methane Plumes: Validation and Sensitivity Experiments to Explore UAV and Satellite Observations

Technological Maturity of Aircraft-Based Methane Sensing for Greenhouse Gas Mitigation

Using remote sensing to detect, validate, and quantify methane emissions from California solid waste operations

A Backward Trajectory Inversion Model for Methane Emission over Beijing Area